integra_gs_22

hey guys i have a 2000 civic dx 2dr i was in my car and i was trying to role down the window and it started to get harder and harder to role down next thing i know the window got jamed it wouldnt role back up soo i took off my door panal and forced it back up so i was wondering if anyone can give me some tips on how to remove the manual window regulator and how to reinstall a new one or used good one back in just to make the job easyer and also if u have one for sale let me know thanks

integra_gs_22

anyone have any idea

COONHOUND

A very common problem i had/have the same problem in my ek. All you have to do is spray some silicone (rubber) lubricant on the rubber pieces (rails)that the window goes up and down in. And roll the window up and down a couple of times to the lubricant. What it is those rubber pieces have to be lubricated or your window will not roll all the way up. I was suprised but after i did this the window worked fine for me.

1. Roll down window
2. Spray lubricant into rubber "channels"
3. Roll up window up and down a couple of times
4. Voila and every couple of months repeat the process, Good Luck!

integra_gs_22

thanks

akz

I had the same problem with my 01 civic as the poster above said you have to keep it lubricated no real point in replacing it as itll cost an arm and a leg, time to take out that WD40 heh

COONHOUND

^^^Yo use a Rubber silicone lubricant for best results. Not wd40 as its meant for metal to metal and not rubber, dont get it twisted.
So integra_gs_22 your window works now or is it still messed up?

integra_gs_22

well the window works on both sides but i still have to change my drivers side regulator due to my buddy forcing the window down when it wasnt letting it the bar that comes out where u have the plastic handle is bent and it tends to skip soo its due for a new one thanks guys i will be pick one up very sooon offf one of the guys on n here and also thanks coonhound u were very helpful i will give u some rep power