IntegraMark

iTrader: (1)

to my knowledge, impact extensions are usually black, heavier and thicker than a regular one. they pretty much have the same feel and appearance as an impact socket.

crazyae

iTrader: (2)

yeah they are tempered and higher tensile strength then your regular chrome sockets your use to. I honestly would try a 3/4" impact gun if it is really giving you that much trouble.

Braver13

yea man...
i wish it would have worked, but i already tried a 3/4" impact gun.
thanks for the replies though folks... still haven't given up, not really a choice here anyway.
Okay, so I'm going to try and find an impact extension.

Braver13

okay.. so weird thing is that we tried it by setting it up so we could move it manually using a long pole so we'd get leverage, and the wheels just start moving if we put enough force,
so we stop trying that because clearly the bolt will not spin out
so its off to the shop, hopefully asap

piggy96

jus put a REALLY long bar on the end of the ratchet and jus crank on it, the heat heat helps a lot to....this is probly a stupid question but are u turning it the right way...lol

94hatchbackls

mine was a bitch too when i had to get it off but i used my impact gun and sat there for an hour straight tryin to get it off but i got to the point and lost hope them tried it agian got a friend to make sure the crake wouldnt move and turned the socket on the impact gun witth my hand and it broke free but go to canadian tire and get the proper oxygen and acceleen torch for like 90 i think and use that if anyhting