GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   honda / acura (https://www.gtcarz.com/honda-acura-66/)
-   -   Best engine for boost? (https://www.gtcarz.com/honda-acura-66/best-engine-boost-38001/)

bubsy12 03-12-2007 11:54 AM

Best engine for boost?
 
Which Honda/Acura engine is best suitable for boost when built? most reliable?

drift_n_shift 03-12-2007 01:24 PM

d16 in oem form. if you're a b guy, then B18C1 (gsr), but i wouldnt push the # of PSI you run. then again, with boost, it's always a good idea to sleeve the block...

crazyae 03-12-2007 06:07 PM

This one is an obvious answer.... the k-series.
A stock K24 bottom end with a k20 head on a gt30 hit around 700 in stock form before blowing a pee sized hole in cylinder 3 while pushing it further on the dyno. I am a beleiver in K series engine, but can definately be out of budget for some people.

drift_n_shift 03-12-2007 10:16 PM

^^^ K is good, but i think you can get alot farther with a b or d for 9 grand.

crazyae 03-12-2007 10:17 PM


Originally Posted by drift_n_shift
^^^ K is good, but i think you can get alot farther with a b or d for 9 grand.

we weren't talking budget, but with that in mind then yes i agree with you.

polskialgorki 03-13-2007 07:51 PM

the answers to this question are so subjective, do you prefer a large displacement and lots of torque or are you good with little displacement on small torque... High end would be a B20 bottom end with B16 type R head or for smaller displacement go with a B16 withe type r head. both are proven to be performers that display durability

drift_n_shift 03-14-2007 01:03 AM


Originally Posted by crazyae
we weren't talking budget, but with that in mind then yes i agree with you.

i got owned!

yea, i forgot budget wasnt a factor. k all the way then.

vtecsyndrome 03-14-2007 03:02 AM

B18C:smilie_da

BrowNKiD 03-14-2007 09:30 AM

it also depends on ur budget and hp/ 1/4 mile times you want to hit.

born2board69 03-14-2007 01:13 PM

would anywhere in the 12 secodns be attainable at about 250whp/200tq on a boosted b16 in an eg with slicks? i know its a very vauge question but im just looking for a rough idea

ALLAN_M 03-14-2007 04:30 PM


Originally Posted by born2board69
would anywhere in the 12 secodns be attainable at about 250whp/200tq on a boosted b16 in an eg with slicks? i know its a very vauge question but im just looking for a rough idea


i dont see y not

DSMonster 03-14-2007 05:46 PM


Originally Posted by crazyae
This one is an obvious answer.... the k-series.
A stock K24 bottom end with a k20 head on a gt30 hit around 700 in stock form ...

I call :bs: on this one. Your not going to make 700hp with a 52lb/min turbo. The turbo simply doesn't flow enough air for that kind of power.

polskialgorki 03-14-2007 05:54 PM

hahahahhahahahahahahhahahahha 700 hp stock....ahahahah what happeneds to the valve springs at that boost level... they would float the valves and youd be lucky to rev the car past 3000 rpm lol!!!!!
K20 .. if this were the case ... im not even gonna get into it....


Dan

95hatchcivic 03-14-2007 07:05 PM

stock d16z6 boost it to 17psi, sounds lovely...or build it a bit to handle higher psi easy 12's

born2board69 03-15-2007 12:01 AM

I saw the k20 that did that. there is a vidoe floating around, they were basically seeing how much they could get out before it blew and they ended up getting like 42psi and like 680whp or something rediculous.


All times are GMT -4. The time now is 12:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06620 seconds with 5 queries