Rep Power: 779

i've been having this HORRIBLE clunk/grind/w.e u wana call it coming from somwhere in the front of my car..when i brake, turn corners turning left, and when i hit bumps..at first i figured drive shaft..so i replaced it, then i replaced the tie rod ends..Im out of idea! this is a constant grind not a single thud! i need help! ideas' and any way to check out wtf is going on. Acura told me shafts..n they where wrong.

 
Rep Power: 779

sounds like it could be bearings in the hubs. Is it front or back? Is the noise all the time or only when you break, or turn?

 
Rep Power: 736

The knocking while turning sounds like CV joint

 
Rep Power: 763

grab the top of your tire and shake it in and out, do this on both sides. it there is any play you wheel bearings could be done causing the grinding and clunking, trannys make some interesting noises when theyre on their way out too, it could be done. maybe even a motor mount is fried and letting something rub.

 
Rep Power: 779

K i have new bearings installed, new cv shafts installed, new tie rod ends installed, new ball joints installed. Its still here. could it be the strut tower?

 
Rep Power: 763

hmmm, dont know what to tell ya, if you jack it up and spin the wheel by hand does it make the noise? you could put it up on jack stands, start it and put it in gear so its driving in the air, if it still makes the noise go over everything with a mechanics stethescope. you should find the source of the sound then.

 
Rep Power: 779

it could be the strut tower bar. If you put one in and its not fully bolted in the top of the shock tower will wobble, and move in and out of the bolt wholes.

 
Rep Power: 779

its impacted

 
Rep Power: 772

It could be your upper arm/ball joint. When they goe they make a clunking noise but also like a squeaking noise also.

 
Rep Power: 779

I've changed it already.

 
Rep Power: 0

hey...have you checked all the rubber bushings for the front suspension?