civtegra90

when i convert my 90 hatch to OBD1, none of the info on I have found yet says anything about alternator. will my obd1 alt. plug right into my obd0 wiring after i make the ecu swap. my idea was to get an obd1 engine harness and butcher it taking off the alt. wiring, O2 wiring and anything else ill need, then splice it onto an obd0 engine harness then throw it all in.

Honda Tech

dude, so what then hell are trying to do, r u changing the car to obd1? and u don't want to have to change that f***** alternator again.

civtegra90

u shut ur face, this is for my new motor, whenever it gets built. this alternator will be installed properly

IntegraMark

iTrader: (1)

no you'll need another alt. i find it easier if you go with an obd-0 to obd-1 conversion harness and an obd-1 ecu re programmed without the stuff you don't need. you end up keeping all the obd-0 parts. which will save you some cash in the end

Honda Tech

Hey! I didn't install it improperly, it just needed slight modifacation and it was all good. but I was just askin, no need to get testy here.