GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   honda / acura (https://www.gtcarz.com/honda-acura-66/)
-   -   Swap Ideas for a 88-91 crx!! (https://www.gtcarz.com/honda-acura-66/swap-ideas-88-91-crx-70555/)

JRPGDAVIES 01-27-2008 04:41 AM

Swap Ideas for a 88-91 crx!!
 
Hey guys im lookin to get myself a 89-91 crx and i was wondering what is the best option for a swap. I was also wondering costs, shops to do the swap you know stuff like that. I dont make a load of money so the cheaper the better. Like motor and tranny wise i can spend a lil bit of cash. Just give me some tips and advise guys anything works. Lookin at spendin around 5g's on swap and labour :la:

drift_n_shift 01-27-2008 01:18 PM

In general, people charge more or less around $500 to do a swap. That's around $4500 left for a swap. For that amount of change, I'd say go with a GSR or Type-R swap. Shop's like option and charger around $4-5k for gsr's and type r's but if you look around forums, you can get a GSR for $2700 (I know of one for sale right now) and a type r for roughly $3500-4000.

You could always build a frankenstein motor like a LS-Vtec (LS block with vtec head) or a B20-Vtec (crv/b20 block with vtec head) for around $4500 but you have to sit down and wonder if you are keeping oem stuff (like pistons/valves/cams etc) or upgrade and that will bring the cost up or down.

JRPGDAVIES 01-27-2008 02:18 PM

You know i was thinkin b20 Z turbo charged, i know its gonna cost me a pretty penny though. For the dispalacement alone it would be worth it personally but i am a noob at this whole thing. I would most likely be upgrading everything, i dont wanna go half ass you know what i mean.

IntegraMark 01-27-2008 04:27 PM

if you don't get an Si you gonna have to change the wiring harness. on top of that you'll need mounts, linkage, axles and other misc. stuff. $5000 should get all that done no problem

JRPGDAVIES 01-27-2008 08:06 PM

thanks for the tips guys ^

Intimidator 01-27-2008 10:10 PM

i got a b16 with turbo set up i just took out of a crx lots done to the motor let me know if ur intetrested. this is a complete swap ready to drop in.

makaveli2k 01-27-2008 11:18 PM

the good thing about CRX's is that they are nice and light. Not much is needed to make them into rockets. I kind of like to be the devil's advocate and do things differently than the rest. I'd try and get something like an f22b or something in there and turbo it or build it NA.

vtecsyndrome 01-30-2008 10:06 PM

B20vtec

got_milk1998 01-30-2008 10:13 PM

ive got a zc for sale.....:P

JRPGDAVIES 02-06-2008 03:12 AM

unfortunately not lookin to buy just yet, i lost my job last week do to "behavioural issues". People need to learn how to take a joke and run with it lol. I will be pursuing the crx dream once i start rollin in the benjamins again :P

BrowNKiD 02-06-2008 03:45 PM

that suks wat did you do?

JRPGDAVIES 02-06-2008 03:58 PM

I worked at ups and some moron plowed into one of the racks with a reach, so i proceeded to say "man if i was gonna do that id at least do it better" or something like that. So this is why i am on my couch with no money and barely makin rent

gtprince 02-07-2008 09:53 AM

drift and shift said it best

bluntman01 03-20-2008 08:18 PM

Sorry to hear that man. B16 has got some power to start and you can install one for cheap 3gs. When you are craving for more power put a turbo on it and youwill be more than happy. Even easier buy another car with the engine and look that you want

type_R 03-21-2008 03:15 AM

h22!!!!!!!!!
strate up buddy H muther ****ing 22.
i know the last couple of h22's ive seen have been for around a g a bit higher or lower in w/e case, but the labour and mounts and just the proper setup itself should all fit into your budget.
H22 man, you wont regrat that.


All times are GMT -4. The time now is 08:45 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05581 seconds with 5 queries