Rep Power: 0

Hey i was just wondering how hard it is to install a vtec controller and is ebay the best way to go to get one... looking for an apexi vtec and air fuel controller... let me know thanks.

Danny

 
Rep Power: 0

instructions come with the controller you gotta tap in to your harness and/or your ecu. you might be better off to get your stock ecu tuned and chipped with a custom map. if you don't have any internal mods done it probably won't do much for you. wrong settings in a vafc might do damage to your motor.

 
Rep Power: 762

dont get a vtec controller, theyre just an expensive hack that looks neat. what are your goals for the vtec controller? change the vtec engage point? higher rev limit? no speed limiter? adjust fuel/ignition maps? all of this can be done with your ecu chipped with crome for bout $50 if not less.

 
Rep Power: 787

Agreed, just get your ecu chipped.

 
Rep Power: 802

Chrome it ! Alot more features and as alot guys are saying vafc is only an expensive hack with not many features to it. fuel tunablity is the only option with those so this is where they disappoint me.

 
Rep Power: 0

A true example of a responsible ricer. Control that Vtack!

 
Rep Power: 0

waste of money

 
Rep Power: 711

where do u get the chipping done for $50? i just swapped h22 in my accord..someone else has h22 ecu chipped..is it ok to swap the ecu or do i have to have my own ecu chipped?

 
Rep Power: 762

as long as the chipped ecu is for your motor, and is a decent program, put it in

you can chip your ecu for less than $50 if you do it yourself, which I do nicely.

chipping isnt hard, tuning properly without the proper tools is

 
Rep Power: 786

couple guy here on the board do crome tuning. 1 already chimed in and the other is zman. zman is tuning mine once it's ready

 
Rep Power: 733

where could you get ur ecu "chromed" or "chipped" lol i never even knew about this until now.

 
Rep Power: 762

anyone who has experience soldering chips into circuit boards can do it, you just gotta get the right kit for your ecu, i usually go to Welcome to www.moates.net! : Moates.Net for my stuff

 
Rep Power: 802

agreed, moates is awsome!