What Do i have to do or replace?
#1
What Do i have to do or replace?
I was installing a new key ignition switch in my 95 civic hatch, i dont know what happened exactly but it made a big shock on the back of the key piece of the harness where its soldered, after that it would only turn on alll lights before you start the car but when i try to turn it over it doesnt work.... what do i do....
#4
check for a soldering bridge, this is when the solder connects the two terminals and shorts out the system. and a fuse should blow out before any electrical equipment gets fried, so definitely check the fuses, probably one in the main distribution box under the hood, not udner the dashGood Luck
Thread
Thread Starter
Forum
Replies
Last Post
Mike Q
Other Honda Models
1
12-23-2007 05:37 PM
dzserge
Other Honda Models
2
12-13-2007 11:17 PM
kasul51
Honda Civic - Del Sol - CRX
1
11-10-2007 03:52 AM
jetlei989
honda / acura
1
06-04-2007 11:02 PM
phil
Honda Mailing List
0
12-24-2004 06:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)