*newbie* question on timing belt change, 96 Accord
10-11-2004, 10:20 PM
#1
Guest
Posts: n/a
*newbie* question on timing belt change, 96 Accord
I just found this group so forgive this question if its been answered a
hundred times already.
I've got a 96 Accord and I need to change the timing belt. Should I also
change the water pump and balance shaft belt at the same time?
I've got pretty good mechanical ability, worked on lots of small engines and
stuff, is changing this belt something I should try or should I take it to a
shop and spend $500+?
thanks,
Richard
hundred times already.
I've got a 96 Accord and I need to change the timing belt. Should I also
change the water pump and balance shaft belt at the same time?
I've got pretty good mechanical ability, worked on lots of small engines and
stuff, is changing this belt something I should try or should I take it to a
shop and spend $500+?
thanks,
Richard
10-12-2004, 09:28 AM
#2
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
On 10/11/04 9:20 PM, in article
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
10-12-2004, 09:28 AM
#3
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
On 10/11/04 9:20 PM, in article
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
10-12-2004, 09:28 AM
#4
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
On 10/11/04 9:20 PM, in article
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
YbHad.20846$zA3.3593382@twister.southeast.rr.com, "Richard Slay"
<rslay@nc.rr.com> wrote:
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines and
> stuff, is changing this belt something I should try or should I take it to a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
It depends how masochistic you are. The hard part is loosening the crank
bolt. It is torqued to 180 lb-ft, but estimates run as high as 500-600
lb-ft to break it loose. If you are going to do it yourself, you will need
to buy the immobilizer tool (big nut with a breaker bar connection that fits
into the recess in the crank pulley) and hardened impact socket, extension &
breaker bar. Alternatively, take it to somebody with a serious air wrench
and have them loosen it for you.
It is a good idea to replace the water pump and balancer belt at the same
time. The balancer belt is made of the same materials as the timing belt
and many people replace the water pump because it is just as much work again
to get to it later if it fails.
10-12-2004, 04:25 PM
#5
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
Change the water pump, and the oil seals too!..
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
10-12-2004, 04:25 PM
#6
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
Change the water pump, and the oil seals too!..
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
10-12-2004, 04:25 PM
#7
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
Change the water pump, and the oil seals too!..
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
"Richard Slay" <rslay@nc.rr.com> wrote in message
news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
> I just found this group so forgive this question if its been answered a
> hundred times already.
>
> I've got a 96 Accord and I need to change the timing belt. Should I also
> change the water pump and balance shaft belt at the same time?
>
> I've got pretty good mechanical ability, worked on lots of small engines
and
> stuff, is changing this belt something I should try or should I take it to
a
> shop and spend $500+?
>
> thanks,
>
> Richard
>
>
>
10-12-2004, 05:34 PM
#8
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
I think its a pretty tough job for a newbie.
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
10-12-2004, 05:34 PM
#9
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
I think its a pretty tough job for a newbie.
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
10-12-2004, 05:34 PM
#10
Guest
Posts: n/a
Re: *newbie* question on timing belt change, 96 Accord
I think its a pretty tough job for a newbie.
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
I got it changed for my 91 Accord and watching the mechanic work. Boy ! its
really a time consuming and tough job dismantling and removing those
nuts/bolts and remembering which goes back where..
I asked a mechanic to do it for me at my home and he charged me $200 labor
for the Timing Belt, Rotor Belt,Water Pump and Tensioner change. I bought
the parts from a Honda Dealer.
Over all cost about $425.
Honda Dealers charge much more then that but yes the work will be warranted.
HNB
"Gershund" <gershund00@usa.com> wrote in message
news:10mofdfp45lki4d@corp.supernews.com...
> Change the water pump, and the oil seals too!..
>
>
> "Richard Slay" <rslay@nc.rr.com> wrote in message
> news:YbHad.20846$zA3.3593382@twister.southeast.rr. com...
>> I just found this group so forgive this question if its been answered a
>> hundred times already.
>>
>> I've got a 96 Accord and I need to change the timing belt. Should I also
>> change the water pump and balance shaft belt at the same time?
>>
>> I've got pretty good mechanical ability, worked on lots of small engines
> and
>> stuff, is changing this belt something I should try or should I take it
>> to
> a
>> shop and spend $500+?
>>
>> thanks,
>>
>> Richard
>>
>>
>>
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
lanh08
Other Honda Models
0
01-01-2008 08:07 PM
Hotyellowstang
GTcarz Member Introductions
6
01-02-2007 06:01 PM
brian.toscano@gmail.com
Honda Mailing List
4
03-01-2005 01:37 AM
Dave Hau
Honda Mailing List
28
12-10-2003 07:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
