1994 Civic Manual
Guest
Posts: n/a
1994 Civic Manual
Does anyone have a paper manual?
If so, please check the front seat bolt sizes on page 20-60, & post
what size is shown.
My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
Page 20-61 at :
http://media.honda.co.uk/car/owner/m...s/CivicManual/
shows 10mm bolts.
My 94 VX has 12mm bolts, as I just found out.
I've been looking for a 94 manual with no luck.
If so, please check the front seat bolt sizes on page 20-60, & post
what size is shown.
My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
Page 20-61 at :
http://media.honda.co.uk/car/owner/m...s/CivicManual/
shows 10mm bolts.
My 94 VX has 12mm bolts, as I just found out.
I've been looking for a 94 manual with no luck.
Guest
Posts: n/a
Re: 1994 Civic Manual
You realize that what the manual gives for bolt sizes is the
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
Guest
Posts: n/a
Re: 1994 Civic Manual
You realize that what the manual gives for bolt sizes is the
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
Guest
Posts: n/a
Re: 1994 Civic Manual
You realize that what the manual gives for bolt sizes is the
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
nominal diameter at the threads, not the size of the socket
that fits the bolt head, right?
The following site is for a 94 Civic VX and shows all the
front seat bolts to be 8 mm and 10 mm ones:
http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
"Mike Doyle" <sigifrith@frontiernet.net> wrote
> Does anyone have a paper manual?
>
> If so, please check the front seat bolt sizes on page
> 20-60, & post
> what size is shown.
>
> My 92 paper manual shows 1 - 10mm & 3 - 8mm bolts.
> Page 20-61 at :
> http://media.honda.co.uk/car/owner/m...s/CivicManual/
> shows 10mm bolts.
>
> My 94 VX has 12mm bolts, as I just found out.
>
> I've been looking for a 94 manual with no luck.
Guest
Posts: n/a
Re: 1994 Civic Manual
Elle wrote:
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
Guest
Posts: n/a
Re: 1994 Civic Manual
Elle wrote:
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
Guest
Posts: n/a
Re: 1994 Civic Manual
Elle wrote:
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
>
> You realize that what the manual gives for bolt sizes is the
> nominal diameter at the threads, not the size of the socket
> that fits the bolt head, right?
>
> The following site is for a 94 Civic VX and shows all the
> front seat bolts to be 8 mm and 10 mm ones:
>
> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
will typically have 14 mm heads.
Eric
Guest
Posts: n/a
Re: 1994 Civic Manual
Eric wrote:
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
Guest
Posts: n/a
Re: 1994 Civic Manual
Eric wrote:
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
Guest
Posts: n/a
Re: 1994 Civic Manual
Eric wrote:
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
> Elle wrote:
>> You realize that what the manual gives for bolt sizes is the
>> nominal diameter at the threads, not the size of the socket
>> that fits the bolt head, right?
>>
>> The following site is for a 94 Civic VX and shows all the
>> front seat bolts to be 8 mm and 10 mm ones:
>>
>> http://www.hondaautomotiveparts.com/...EAT+COMPONENTS
>
> On a Honda, 8 mm bolts will typically have 12 mm heads while the 10 mm bolts
> will typically have 14 mm heads.
>
> Eric
Thank you both! I was taking it as head size.
Thread
Thread Starter
Forum
Replies
Last Post
Cosmin N.
Honda Mailing List
0
Apr 4, 2004 03:06 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)