2000 Civic PCV valve ?
#2
Guest
Posts: n/a
Re: 2000 Civic PCV valve ?
it will help with fuel economy and oil consumption. Easier to do during an
oil change as the oil filter interferes with removal.
t
2000 Civic hatch wrote:
>My bone stock 2000 Civic (D16Y7 engine) is going fine, should I clean
>or replace the PCV valve some day soon (the manual makes NO mention of
>this) ?
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200803/1
oil change as the oil filter interferes with removal.
t
2000 Civic hatch wrote:
>My bone stock 2000 Civic (D16Y7 engine) is going fine, should I clean
>or replace the PCV valve some day soon (the manual makes NO mention of
>this) ?
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200803/1
#3
Pcv
I wouldnt if it were me it seems more of a hasel for what you will even do you probly wont even notice it. (if it aint broke dont fix it) Thats just me tho i would not bother personaly but it up to you it is your car
#4
Guest
Posts: n/a
Re: 2000 Civic PCV valve ?
"2000 Civic hatch" <rob.fruth@gmail.com> wrote
> My bone stock 2000 Civic (D16Y7 engine) is going fine,
> should I clean
> or replace the PCV valve some day soon (the manual makes
> NO mention of
> this) ?
I do not have the 2000 manual in front of me, but the 1999
one says to inspect the PCV valve every 60 months/60k miles,
whichever comes first. That's similar to what is written for
my 91 Civic.
You should remove the PCV valve and soak it with carb
cleaner (which typically says it's good for cleaning PCV
components, too). Or you can spray it with PB Blaster. Both
cleaners are available at places like Autozone and Wal-Mart
for a few dollars a can.
The site http://honda.lioness.googlepages.com/gasmileagetips
describes my experience with my 91 Civic's PCV valve. I
think it's worth a read.
On a few Hondas, the PCV valve is hard to get to. On most,
it's easy to remove and re-install.
> My bone stock 2000 Civic (D16Y7 engine) is going fine,
> should I clean
> or replace the PCV valve some day soon (the manual makes
> NO mention of
> this) ?
I do not have the 2000 manual in front of me, but the 1999
one says to inspect the PCV valve every 60 months/60k miles,
whichever comes first. That's similar to what is written for
my 91 Civic.
You should remove the PCV valve and soak it with carb
cleaner (which typically says it's good for cleaning PCV
components, too). Or you can spray it with PB Blaster. Both
cleaners are available at places like Autozone and Wal-Mart
for a few dollars a can.
The site http://honda.lioness.googlepages.com/gasmileagetips
describes my experience with my 91 Civic's PCV valve. I
think it's worth a read.
On a few Hondas, the PCV valve is hard to get to. On most,
it's easy to remove and re-install.
#5
Guest
Posts: n/a
Re: 2000 Civic PCV valve ?
the 2000 civic (if its the same as my 98, should be since same engine and
same generation of civic) is pretty hard to get to unless you remove the oil
filter. Even then, its fairly hard, my hands are pretty big and don't lend
themselves to this job very well...
Elle wrote:
>> My bone stock 2000 Civic (D16Y7 engine) is going fine,
>> should I clean
>> or replace the PCV valve some day soon (the manual makes
>> NO mention of
>> this) ?
>
>I do not have the 2000 manual in front of me, but the 1999
>one says to inspect the PCV valve every 60 months/60k miles,
>whichever comes first. That's similar to what is written for
>my 91 Civic.
>
>You should remove the PCV valve and soak it with carb
>cleaner (which typically says it's good for cleaning PCV
>components, too). Or you can spray it with PB Blaster. Both
>cleaners are available at places like Autozone and Wal-Mart
>for a few dollars a can.
>
>The site http://honda.lioness.googlepages.com/gasmileagetips
>describes my experience with my 91 Civic's PCV valve. I
>think it's worth a read.
>
>On a few Hondas, the PCV valve is hard to get to. On most,
>it's easy to remove and re-install.
--
Message posted via http://www.carkb.com
same generation of civic) is pretty hard to get to unless you remove the oil
filter. Even then, its fairly hard, my hands are pretty big and don't lend
themselves to this job very well...
Elle wrote:
>> My bone stock 2000 Civic (D16Y7 engine) is going fine,
>> should I clean
>> or replace the PCV valve some day soon (the manual makes
>> NO mention of
>> this) ?
>
>I do not have the 2000 manual in front of me, but the 1999
>one says to inspect the PCV valve every 60 months/60k miles,
>whichever comes first. That's similar to what is written for
>my 91 Civic.
>
>You should remove the PCV valve and soak it with carb
>cleaner (which typically says it's good for cleaning PCV
>components, too). Or you can spray it with PB Blaster. Both
>cleaners are available at places like Autozone and Wal-Mart
>for a few dollars a can.
>
>The site http://honda.lioness.googlepages.com/gasmileagetips
>describes my experience with my 91 Civic's PCV valve. I
>think it's worth a read.
>
>On a few Hondas, the PCV valve is hard to get to. On most,
>it's easy to remove and re-install.
--
Message posted via http://www.carkb.com
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)