2003 Civic side mirror
#16
Guest
Posts: n/a
Re: 2003 Civic side mirror
N.E.Ohio Bob wrote:
> Hot melt glue gun! bob
The glue gun is a sensible idea (or duct tape, for that matter), but I
am not able to separate the mirror from the power folding pivots. Any
idea on how can take the mirror off without damaging the power folding
system?
#17
Guest
Posts: n/a
Re: 2003 Civic side mirror
golarrazabal@gmail.com wrote in
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#18
Guest
Posts: n/a
Re: 2003 Civic side mirror
golarrazabal@gmail.com wrote in
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#19
Guest
Posts: n/a
Re: 2003 Civic side mirror
golarrazabal@gmail.com wrote in
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:1149196476.411819.205020@h76g2000cwa.googlegr oups.com:
>
> N.E.Ohio Bob wrote:
>> Hot melt glue gun! bob
>
> The glue gun is a sensible idea (or duct tape, for that matter), but I
> am not able to separate the mirror from the power folding pivots. Any
> idea on how can take the mirror off without damaging the power folding
> system?
>
>
The power systems are contained within the mirror housing. As with just
about all Honda "flag"-mounted mirrors, three screws/nuts hold the mirror
assembly on to the flag portion of the window frame.
Working with the door open, carefully pry the trim cover from the inside
face of the flag until the cover pops off. The clip that holds it on is
mid-point at the forward edge of the triangle. This will expose the nuts
and electrical connector. Disconnect the electrical connector, remove nuts,
pull housing away from the door. Entire mirror should come off.
Does this work for you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
hank k
Other Honda Models
0
05-27-2008 10:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)