Mark

Hi

I have a '97 UK Prelude VTi. Ever since I've had the car, the rear spoiler
brake light has never worked. Does anyone know if the light has its own
fuse or roughly where the cables run once they disappear into the boot lid?

Many thanks

Mark

Tegger

"Mark" <markmc1024@hotmail.com> wrote in
news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:

> Hi
>
> I have a '97 UK Prelude VTi. Ever since I've had the car, the rear
> spoiler brake light has never worked. Does anyone know if the light
> has its own fuse or roughly where the cables run once they disappear
> into the boot lid?
>



Have you tried simply replacing the bulb?


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Tegger

"Mark" <markmc1024@hotmail.com> wrote in
news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:

> Hi
>
> I have a '97 UK Prelude VTi. Ever since I've had the car, the rear
> spoiler brake light has never worked. Does anyone know if the light
> has its own fuse or roughly where the cables run once they disappear
> into the boot lid?
>



Have you tried simply replacing the bulb?


--
Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Mark

"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
> "Mark" <markmc1024@hotmail.com> wrote in
> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>
> Have you tried simply replacing the bulb?
>
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

No, as it's actually a row of LED's, which I haven't replaced yet.

Mark

"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
> "Mark" <markmc1024@hotmail.com> wrote in
> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>
> Have you tried simply replacing the bulb?
>
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/

No, as it's actually a row of LED's, which I haven't replaced yet.

Stewart DIBBS

"Mark" <markmc1024@hotmail.com> wrote in message
news:gwtXi.215781$lV4.207179@fe2.news.blueyonder.c o.uk...
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
>> "Mark" <markmc1024@hotmail.com> wrote in
>> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>>
>> Have you tried simply replacing the bulb?
>>
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQ
>> www.tegger.com/hondafaq/
>
> No, as it's actually a row of LED's, which I haven't replaced yet.

Well...why not take the LED strip put and see if there's +12v being supplied
by the brake light circuit. If there is, and all the LEDs are out, examine
the LED strip circuit board for burned traces. If there's a big resistor,
check its not open circuit.

If no +12v, check the connectors and ground.

SD

Stewart DIBBS

"Mark" <markmc1024@hotmail.com> wrote in message
news:gwtXi.215781$lV4.207179@fe2.news.blueyonder.c o.uk...
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
>> "Mark" <markmc1024@hotmail.com> wrote in
>> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>>
>> Have you tried simply replacing the bulb?
>>
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQ
>> www.tegger.com/hondafaq/
>
> No, as it's actually a row of LED's, which I haven't replaced yet.

Well...why not take the LED strip put and see if there's +12v being supplied
by the brake light circuit. If there is, and all the LEDs are out, examine
the LED strip circuit board for burned traces. If there's a big resistor,
check its not open circuit.

If no +12v, check the connectors and ground.

SD

Seth

"Stewart DIBBS" <sjd@pixcl.com> wrote in message
news:4f1df$472f9a5a$d1d95d47$12934@PRIMUS.CA...
>
> "Mark" <markmc1024@hotmail.com> wrote in message
> news:gwtXi.215781$lV4.207179@fe2.news.blueyonder.c o.uk...
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
>>> "Mark" <markmc1024@hotmail.com> wrote in
>>> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>>>
>>> Have you tried simply replacing the bulb?
>>>
>>>
>>> --
>>> Tegger
>>>
>>> The Unofficial Honda/Acura FAQ
>>> www.tegger.com/hondafaq/
>>
>> No, as it's actually a row of LED's, which I haven't replaced yet.
>
> Well...why not take the LED strip put and see if there's +12v being
> supplied by the brake light circuit. If there is, and all the LEDs are
> out, examine the LED strip circuit board for burned traces. If there's a
> big resistor, check its not open circuit.
>
> If no +12v, check the connectors and ground.


To the OP: Does the rear deck 3rd brake light work? I'm thinking maybe it
was added after the initial car purchase by the previous owner and they
didn't do the wiring. Usually the deck mounted brake light is disconnected
and it's wiring is used to power the spoiler mounted light.

Seth

"Stewart DIBBS" <sjd@pixcl.com> wrote in message
news:4f1df$472f9a5a$d1d95d47$12934@PRIMUS.CA...
>
> "Mark" <markmc1024@hotmail.com> wrote in message
> news:gwtXi.215781$lV4.207179@fe2.news.blueyonder.c o.uk...
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns99DEBDF2FAF3Ategger@207.14.116.130...
>>> "Mark" <markmc1024@hotmail.com> wrote in
>>> news:wnrXi.213849$lV4.212041@fe2.news.blueyonder.c o.uk:
>>>
>>> Have you tried simply replacing the bulb?
>>>
>>>
>>> --
>>> Tegger
>>>
>>> The Unofficial Honda/Acura FAQ
>>> www.tegger.com/hondafaq/
>>
>> No, as it's actually a row of LED's, which I haven't replaced yet.
>
> Well...why not take the LED strip put and see if there's +12v being
> supplied by the brake light circuit. If there is, and all the LEDs are
> out, examine the LED strip circuit board for burned traces. If there's a
> big resistor, check its not open circuit.
>
> If no +12v, check the connectors and ground.


To the OP: Does the rear deck 3rd brake light work? I'm thinking maybe it
was added after the initial car purchase by the previous owner and they
didn't do the wiring. Usually the deck mounted brake light is disconnected
and it's wiring is used to power the spoiler mounted light.