86 civic Weber 2 barrel tuning
09-19-2004, 02:57 AM
#16
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
right on that assumption?
JT
Steve wrote:
>
> I'll eventually post a picture of the engine bay, it looks good with all the
> garbage out of there. That will convince you!
> Steve
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >
> >
> > Eric wrote:
> >>
> >> Steve wrote:
> >> >
> >> > Was just looking for a fix, i knew webers made a great all around carb
> >> > set
> >> > up. Primarally reason was to get it to run decent for the daughter.
> >>
> >> [snip]
> >>
> >> This has been an interesting discussion, especially if the original
> >> engine
> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> barrel
> >> fed a small quantity of a rich mixture to the CVCC valves. This mixture
> >> was
> >> then ignited in the precombustion chamber eliciting a flame front which
> >> then
> >> ignited a lean mixture that was fed to the cylinders through the primary
> >> and
> >> secondary barrels (the latter typically only invoked under heavy throttle
> >> such as when the car is under acceleration). By using this method, Honda
> >> was able to postpone using catalytic converters for many years since it
> >> allowed their engines to be both fuel efficient and have low emissions
> >> (yes
> >> I know that the '86 has a cat, this started in '84 which was about 4 or
> >> more
> >> years after most other US cars had cats).
> >>
> >
> >
> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> > converters. I kinda think that they reared their ugly head back around
> > 1980 by statute...
> >
> >
> >> Does the Weber carburetor you installed have a separate barrel for the
> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> fuel
> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> electrode on the carbureted units was in the precombustion chamber, not
> >> the
> >> main combustion chamber. If the Weber does not correctly feed the
> >> auxiliary
> >> valves, then it might seem that fuel mixture ignition would not occur as
> >> well as originally designed and the car might not pass an emissions
> >> inspection.
> >>
> >> Of course, the whole above discussion is mute if indeed the engine had
> >> the
> >> fuel injected head which did not have the CVCC valves.
> >>
> >> Eric
> >
> >
> > I'll be interested in responses to this as well since I'm making one
> > good car out of the two that I have and all them thar' vacuum hoses are
> > causing me nightmares and insomnia (as one might tell from the posting
> > hour of this note).
> >
> >
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
right on that assumption?
JT
Steve wrote:
>
> I'll eventually post a picture of the engine bay, it looks good with all the
> garbage out of there. That will convince you!
> Steve
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >
> >
> > Eric wrote:
> >>
> >> Steve wrote:
> >> >
> >> > Was just looking for a fix, i knew webers made a great all around carb
> >> > set
> >> > up. Primarally reason was to get it to run decent for the daughter.
> >>
> >> [snip]
> >>
> >> This has been an interesting discussion, especially if the original
> >> engine
> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> barrel
> >> fed a small quantity of a rich mixture to the CVCC valves. This mixture
> >> was
> >> then ignited in the precombustion chamber eliciting a flame front which
> >> then
> >> ignited a lean mixture that was fed to the cylinders through the primary
> >> and
> >> secondary barrels (the latter typically only invoked under heavy throttle
> >> such as when the car is under acceleration). By using this method, Honda
> >> was able to postpone using catalytic converters for many years since it
> >> allowed their engines to be both fuel efficient and have low emissions
> >> (yes
> >> I know that the '86 has a cat, this started in '84 which was about 4 or
> >> more
> >> years after most other US cars had cats).
> >>
> >
> >
> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> > converters. I kinda think that they reared their ugly head back around
> > 1980 by statute...
> >
> >
> >> Does the Weber carburetor you installed have a separate barrel for the
> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> fuel
> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> electrode on the carbureted units was in the precombustion chamber, not
> >> the
> >> main combustion chamber. If the Weber does not correctly feed the
> >> auxiliary
> >> valves, then it might seem that fuel mixture ignition would not occur as
> >> well as originally designed and the car might not pass an emissions
> >> inspection.
> >>
> >> Of course, the whole above discussion is mute if indeed the engine had
> >> the
> >> fuel injected head which did not have the CVCC valves.
> >>
> >> Eric
> >
> >
> > I'll be interested in responses to this as well since I'm making one
> > good car out of the two that I have and all them thar' vacuum hoses are
> > causing me nightmares and insomnia (as one might tell from the posting
> > hour of this note).
> >
> >
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-19-2004, 02:57 AM
#17
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
right on that assumption?
JT
Steve wrote:
>
> I'll eventually post a picture of the engine bay, it looks good with all the
> garbage out of there. That will convince you!
> Steve
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >
> >
> > Eric wrote:
> >>
> >> Steve wrote:
> >> >
> >> > Was just looking for a fix, i knew webers made a great all around carb
> >> > set
> >> > up. Primarally reason was to get it to run decent for the daughter.
> >>
> >> [snip]
> >>
> >> This has been an interesting discussion, especially if the original
> >> engine
> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> barrel
> >> fed a small quantity of a rich mixture to the CVCC valves. This mixture
> >> was
> >> then ignited in the precombustion chamber eliciting a flame front which
> >> then
> >> ignited a lean mixture that was fed to the cylinders through the primary
> >> and
> >> secondary barrels (the latter typically only invoked under heavy throttle
> >> such as when the car is under acceleration). By using this method, Honda
> >> was able to postpone using catalytic converters for many years since it
> >> allowed their engines to be both fuel efficient and have low emissions
> >> (yes
> >> I know that the '86 has a cat, this started in '84 which was about 4 or
> >> more
> >> years after most other US cars had cats).
> >>
> >
> >
> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> > converters. I kinda think that they reared their ugly head back around
> > 1980 by statute...
> >
> >
> >> Does the Weber carburetor you installed have a separate barrel for the
> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> fuel
> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> electrode on the carbureted units was in the precombustion chamber, not
> >> the
> >> main combustion chamber. If the Weber does not correctly feed the
> >> auxiliary
> >> valves, then it might seem that fuel mixture ignition would not occur as
> >> well as originally designed and the car might not pass an emissions
> >> inspection.
> >>
> >> Of course, the whole above discussion is mute if indeed the engine had
> >> the
> >> fuel injected head which did not have the CVCC valves.
> >>
> >> Eric
> >
> >
> > I'll be interested in responses to this as well since I'm making one
> > good car out of the two that I have and all them thar' vacuum hoses are
> > causing me nightmares and insomnia (as one might tell from the posting
> > hour of this note).
> >
> >
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
right on that assumption?
JT
Steve wrote:
>
> I'll eventually post a picture of the engine bay, it looks good with all the
> garbage out of there. That will convince you!
> Steve
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >
> >
> > Eric wrote:
> >>
> >> Steve wrote:
> >> >
> >> > Was just looking for a fix, i knew webers made a great all around carb
> >> > set
> >> > up. Primarally reason was to get it to run decent for the daughter.
> >>
> >> [snip]
> >>
> >> This has been an interesting discussion, especially if the original
> >> engine
> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> barrel
> >> fed a small quantity of a rich mixture to the CVCC valves. This mixture
> >> was
> >> then ignited in the precombustion chamber eliciting a flame front which
> >> then
> >> ignited a lean mixture that was fed to the cylinders through the primary
> >> and
> >> secondary barrels (the latter typically only invoked under heavy throttle
> >> such as when the car is under acceleration). By using this method, Honda
> >> was able to postpone using catalytic converters for many years since it
> >> allowed their engines to be both fuel efficient and have low emissions
> >> (yes
> >> I know that the '86 has a cat, this started in '84 which was about 4 or
> >> more
> >> years after most other US cars had cats).
> >>
> >
> >
> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> > converters. I kinda think that they reared their ugly head back around
> > 1980 by statute...
> >
> >
> >> Does the Weber carburetor you installed have a separate barrel for the
> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> fuel
> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> electrode on the carbureted units was in the precombustion chamber, not
> >> the
> >> main combustion chamber. If the Weber does not correctly feed the
> >> auxiliary
> >> valves, then it might seem that fuel mixture ignition would not occur as
> >> well as originally designed and the car might not pass an emissions
> >> inspection.
> >>
> >> Of course, the whole above discussion is mute if indeed the engine had
> >> the
> >> fuel injected head which did not have the CVCC valves.
> >>
> >> Eric
> >
> >
> > I'll be interested in responses to this as well since I'm making one
> > good car out of the two that I have and all them thar' vacuum hoses are
> > causing me nightmares and insomnia (as one might tell from the posting
> > hour of this note).
> >
> >
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-20-2004, 01:06 AM
#18
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
what it has.
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414D2E89.F753106@doofis.FAKEcom...
> I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> right on that assumption?
>
> JT
>
>
>
> Steve wrote:
>>
>> I'll eventually post a picture of the engine bay, it looks good with all
>> the
>> garbage out of there. That will convince you!
>> Steve
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >
>> >
>> > Eric wrote:
>> >>
>> >> Steve wrote:
>> >> >
>> >> > Was just looking for a fix, i knew webers made a great all around
>> >> > carb
>> >> > set
>> >> > up. Primarally reason was to get it to run decent for the daughter.
>> >>
>> >> [snip]
>> >>
>> >> This has been an interesting discussion, especially if the original
>> >> engine
>> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
>> >> barrel
>> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> mixture
>> >> was
>> >> then ignited in the precombustion chamber eliciting a flame front
>> >> which
>> >> then
>> >> ignited a lean mixture that was fed to the cylinders through the
>> >> primary
>> >> and
>> >> secondary barrels (the latter typically only invoked under heavy
>> >> throttle
>> >> such as when the car is under acceleration). By using this method,
>> >> Honda
>> >> was able to postpone using catalytic converters for many years since
>> >> it
>> >> allowed their engines to be both fuel efficient and have low emissions
>> >> (yes
>> >> I know that the '86 has a cat, this started in '84 which was about 4
>> >> or
>> >> more
>> >> years after most other US cars had cats).
>> >>
>> >
>> >
>> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> > converters. I kinda think that they reared their ugly head back around
>> > 1980 by statute...
>> >
>> >
>> >> Does the Weber carburetor you installed have a separate barrel for the
>> >> auxiliary valves? Or, did you switch over to a head that was for the
>> >> fuel
>> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
>> >> electrode on the carbureted units was in the precombustion chamber,
>> >> not
>> >> the
>> >> main combustion chamber. If the Weber does not correctly feed the
>> >> auxiliary
>> >> valves, then it might seem that fuel mixture ignition would not occur
>> >> as
>> >> well as originally designed and the car might not pass an emissions
>> >> inspection.
>> >>
>> >> Of course, the whole above discussion is mute if indeed the engine had
>> >> the
>> >> fuel injected head which did not have the CVCC valves.
>> >>
>> >> Eric
>> >
>> >
>> > I'll be interested in responses to this as well since I'm making one
>> > good car out of the two that I have and all them thar' vacuum hoses are
>> > causing me nightmares and insomnia (as one might tell from the posting
>> > hour of this note).
>> >
>> >
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
what it has.
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414D2E89.F753106@doofis.FAKEcom...
> I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> right on that assumption?
>
> JT
>
>
>
> Steve wrote:
>>
>> I'll eventually post a picture of the engine bay, it looks good with all
>> the
>> garbage out of there. That will convince you!
>> Steve
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >
>> >
>> > Eric wrote:
>> >>
>> >> Steve wrote:
>> >> >
>> >> > Was just looking for a fix, i knew webers made a great all around
>> >> > carb
>> >> > set
>> >> > up. Primarally reason was to get it to run decent for the daughter.
>> >>
>> >> [snip]
>> >>
>> >> This has been an interesting discussion, especially if the original
>> >> engine
>> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
>> >> barrel
>> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> mixture
>> >> was
>> >> then ignited in the precombustion chamber eliciting a flame front
>> >> which
>> >> then
>> >> ignited a lean mixture that was fed to the cylinders through the
>> >> primary
>> >> and
>> >> secondary barrels (the latter typically only invoked under heavy
>> >> throttle
>> >> such as when the car is under acceleration). By using this method,
>> >> Honda
>> >> was able to postpone using catalytic converters for many years since
>> >> it
>> >> allowed their engines to be both fuel efficient and have low emissions
>> >> (yes
>> >> I know that the '86 has a cat, this started in '84 which was about 4
>> >> or
>> >> more
>> >> years after most other US cars had cats).
>> >>
>> >
>> >
>> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> > converters. I kinda think that they reared their ugly head back around
>> > 1980 by statute...
>> >
>> >
>> >> Does the Weber carburetor you installed have a separate barrel for the
>> >> auxiliary valves? Or, did you switch over to a head that was for the
>> >> fuel
>> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
>> >> electrode on the carbureted units was in the precombustion chamber,
>> >> not
>> >> the
>> >> main combustion chamber. If the Weber does not correctly feed the
>> >> auxiliary
>> >> valves, then it might seem that fuel mixture ignition would not occur
>> >> as
>> >> well as originally designed and the car might not pass an emissions
>> >> inspection.
>> >>
>> >> Of course, the whole above discussion is mute if indeed the engine had
>> >> the
>> >> fuel injected head which did not have the CVCC valves.
>> >>
>> >> Eric
>> >
>> >
>> > I'll be interested in responses to this as well since I'm making one
>> > good car out of the two that I have and all them thar' vacuum hoses are
>> > causing me nightmares and insomnia (as one might tell from the posting
>> > hour of this note).
>> >
>> >
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
09-20-2004, 01:06 AM
#19
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
what it has.
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414D2E89.F753106@doofis.FAKEcom...
> I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> right on that assumption?
>
> JT
>
>
>
> Steve wrote:
>>
>> I'll eventually post a picture of the engine bay, it looks good with all
>> the
>> garbage out of there. That will convince you!
>> Steve
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >
>> >
>> > Eric wrote:
>> >>
>> >> Steve wrote:
>> >> >
>> >> > Was just looking for a fix, i knew webers made a great all around
>> >> > carb
>> >> > set
>> >> > up. Primarally reason was to get it to run decent for the daughter.
>> >>
>> >> [snip]
>> >>
>> >> This has been an interesting discussion, especially if the original
>> >> engine
>> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
>> >> barrel
>> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> mixture
>> >> was
>> >> then ignited in the precombustion chamber eliciting a flame front
>> >> which
>> >> then
>> >> ignited a lean mixture that was fed to the cylinders through the
>> >> primary
>> >> and
>> >> secondary barrels (the latter typically only invoked under heavy
>> >> throttle
>> >> such as when the car is under acceleration). By using this method,
>> >> Honda
>> >> was able to postpone using catalytic converters for many years since
>> >> it
>> >> allowed their engines to be both fuel efficient and have low emissions
>> >> (yes
>> >> I know that the '86 has a cat, this started in '84 which was about 4
>> >> or
>> >> more
>> >> years after most other US cars had cats).
>> >>
>> >
>> >
>> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> > converters. I kinda think that they reared their ugly head back around
>> > 1980 by statute...
>> >
>> >
>> >> Does the Weber carburetor you installed have a separate barrel for the
>> >> auxiliary valves? Or, did you switch over to a head that was for the
>> >> fuel
>> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
>> >> electrode on the carbureted units was in the precombustion chamber,
>> >> not
>> >> the
>> >> main combustion chamber. If the Weber does not correctly feed the
>> >> auxiliary
>> >> valves, then it might seem that fuel mixture ignition would not occur
>> >> as
>> >> well as originally designed and the car might not pass an emissions
>> >> inspection.
>> >>
>> >> Of course, the whole above discussion is mute if indeed the engine had
>> >> the
>> >> fuel injected head which did not have the CVCC valves.
>> >>
>> >> Eric
>> >
>> >
>> > I'll be interested in responses to this as well since I'm making one
>> > good car out of the two that I have and all them thar' vacuum hoses are
>> > causing me nightmares and insomnia (as one might tell from the posting
>> > hour of this note).
>> >
>> >
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
what it has.
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414D2E89.F753106@doofis.FAKEcom...
> I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> right on that assumption?
>
> JT
>
>
>
> Steve wrote:
>>
>> I'll eventually post a picture of the engine bay, it looks good with all
>> the
>> garbage out of there. That will convince you!
>> Steve
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >
>> >
>> > Eric wrote:
>> >>
>> >> Steve wrote:
>> >> >
>> >> > Was just looking for a fix, i knew webers made a great all around
>> >> > carb
>> >> > set
>> >> > up. Primarally reason was to get it to run decent for the daughter.
>> >>
>> >> [snip]
>> >>
>> >> This has been an interesting discussion, especially if the original
>> >> engine
>> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
>> >> barrel
>> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> mixture
>> >> was
>> >> then ignited in the precombustion chamber eliciting a flame front
>> >> which
>> >> then
>> >> ignited a lean mixture that was fed to the cylinders through the
>> >> primary
>> >> and
>> >> secondary barrels (the latter typically only invoked under heavy
>> >> throttle
>> >> such as when the car is under acceleration). By using this method,
>> >> Honda
>> >> was able to postpone using catalytic converters for many years since
>> >> it
>> >> allowed their engines to be both fuel efficient and have low emissions
>> >> (yes
>> >> I know that the '86 has a cat, this started in '84 which was about 4
>> >> or
>> >> more
>> >> years after most other US cars had cats).
>> >>
>> >
>> >
>> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> > converters. I kinda think that they reared their ugly head back around
>> > 1980 by statute...
>> >
>> >
>> >> Does the Weber carburetor you installed have a separate barrel for the
>> >> auxiliary valves? Or, did you switch over to a head that was for the
>> >> fuel
>> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
>> >> electrode on the carbureted units was in the precombustion chamber,
>> >> not
>> >> the
>> >> main combustion chamber. If the Weber does not correctly feed the
>> >> auxiliary
>> >> valves, then it might seem that fuel mixture ignition would not occur
>> >> as
>> >> well as originally designed and the car might not pass an emissions
>> >> inspection.
>> >>
>> >> Of course, the whole above discussion is mute if indeed the engine had
>> >> the
>> >> fuel injected head which did not have the CVCC valves.
>> >>
>> >> Eric
>> >
>> >
>> > I'll be interested in responses to this as well since I'm making one
>> > good car out of the two that I have and all them thar' vacuum hoses are
>> > causing me nightmares and insomnia (as one might tell from the posting
>> > hour of this note).
>> >
>> >
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
09-20-2004, 04:41 PM
#20
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
The CVCC engine head has three valves per cylinder. One of them is tiny
with several small "holes" in it.
If there is a way to put a normal carb on this setup, I am (like Perot)
all ears!
JT
Steve wrote:
>
> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
> what it has.
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414D2E89.F753106@doofis.FAKEcom...
> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> > right on that assumption?
> >
> > JT
> >
> >
> >
> > Steve wrote:
> >>
> >> I'll eventually post a picture of the engine bay, it looks good with all
> >> the
> >> garbage out of there. That will convince you!
> >> Steve
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >
> >> >
> >> > Eric wrote:
> >> >>
> >> >> Steve wrote:
> >> >> >
> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> > carb
> >> >> > set
> >> >> > up. Primarally reason was to get it to run decent for the daughter.
> >> >>
> >> >> [snip]
> >> >>
> >> >> This has been an interesting discussion, especially if the original
> >> >> engine
> >> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> >> barrel
> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> mixture
> >> >> was
> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> which
> >> >> then
> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> primary
> >> >> and
> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> throttle
> >> >> such as when the car is under acceleration). By using this method,
> >> >> Honda
> >> >> was able to postpone using catalytic converters for many years since
> >> >> it
> >> >> allowed their engines to be both fuel efficient and have low emissions
> >> >> (yes
> >> >> I know that the '86 has a cat, this started in '84 which was about 4
> >> >> or
> >> >> more
> >> >> years after most other US cars had cats).
> >> >>
> >> >
> >> >
> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> > converters. I kinda think that they reared their ugly head back around
> >> > 1980 by statute...
> >> >
> >> >
> >> >> Does the Weber carburetor you installed have a separate barrel for the
> >> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> >> fuel
> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> not
> >> >> the
> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> auxiliary
> >> >> valves, then it might seem that fuel mixture ignition would not occur
> >> >> as
> >> >> well as originally designed and the car might not pass an emissions
> >> >> inspection.
> >> >>
> >> >> Of course, the whole above discussion is mute if indeed the engine had
> >> >> the
> >> >> fuel injected head which did not have the CVCC valves.
> >> >>
> >> >> Eric
> >> >
> >> >
> >> > I'll be interested in responses to this as well since I'm making one
> >> > good car out of the two that I have and all them thar' vacuum hoses are
> >> > causing me nightmares and insomnia (as one might tell from the posting
> >> > hour of this note).
> >> >
> >> >
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
with several small "holes" in it.
If there is a way to put a normal carb on this setup, I am (like Perot)
all ears!
JT
Steve wrote:
>
> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
> what it has.
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414D2E89.F753106@doofis.FAKEcom...
> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> > right on that assumption?
> >
> > JT
> >
> >
> >
> > Steve wrote:
> >>
> >> I'll eventually post a picture of the engine bay, it looks good with all
> >> the
> >> garbage out of there. That will convince you!
> >> Steve
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >
> >> >
> >> > Eric wrote:
> >> >>
> >> >> Steve wrote:
> >> >> >
> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> > carb
> >> >> > set
> >> >> > up. Primarally reason was to get it to run decent for the daughter.
> >> >>
> >> >> [snip]
> >> >>
> >> >> This has been an interesting discussion, especially if the original
> >> >> engine
> >> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> >> barrel
> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> mixture
> >> >> was
> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> which
> >> >> then
> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> primary
> >> >> and
> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> throttle
> >> >> such as when the car is under acceleration). By using this method,
> >> >> Honda
> >> >> was able to postpone using catalytic converters for many years since
> >> >> it
> >> >> allowed their engines to be both fuel efficient and have low emissions
> >> >> (yes
> >> >> I know that the '86 has a cat, this started in '84 which was about 4
> >> >> or
> >> >> more
> >> >> years after most other US cars had cats).
> >> >>
> >> >
> >> >
> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> > converters. I kinda think that they reared their ugly head back around
> >> > 1980 by statute...
> >> >
> >> >
> >> >> Does the Weber carburetor you installed have a separate barrel for the
> >> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> >> fuel
> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> not
> >> >> the
> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> auxiliary
> >> >> valves, then it might seem that fuel mixture ignition would not occur
> >> >> as
> >> >> well as originally designed and the car might not pass an emissions
> >> >> inspection.
> >> >>
> >> >> Of course, the whole above discussion is mute if indeed the engine had
> >> >> the
> >> >> fuel injected head which did not have the CVCC valves.
> >> >>
> >> >> Eric
> >> >
> >> >
> >> > I'll be interested in responses to this as well since I'm making one
> >> > good car out of the two that I have and all them thar' vacuum hoses are
> >> > causing me nightmares and insomnia (as one might tell from the posting
> >> > hour of this note).
> >> >
> >> >
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-20-2004, 04:41 PM
#21
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
The CVCC engine head has three valves per cylinder. One of them is tiny
with several small "holes" in it.
If there is a way to put a normal carb on this setup, I am (like Perot)
all ears!
JT
Steve wrote:
>
> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
> what it has.
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414D2E89.F753106@doofis.FAKEcom...
> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> > right on that assumption?
> >
> > JT
> >
> >
> >
> > Steve wrote:
> >>
> >> I'll eventually post a picture of the engine bay, it looks good with all
> >> the
> >> garbage out of there. That will convince you!
> >> Steve
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >
> >> >
> >> > Eric wrote:
> >> >>
> >> >> Steve wrote:
> >> >> >
> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> > carb
> >> >> > set
> >> >> > up. Primarally reason was to get it to run decent for the daughter.
> >> >>
> >> >> [snip]
> >> >>
> >> >> This has been an interesting discussion, especially if the original
> >> >> engine
> >> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> >> barrel
> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> mixture
> >> >> was
> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> which
> >> >> then
> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> primary
> >> >> and
> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> throttle
> >> >> such as when the car is under acceleration). By using this method,
> >> >> Honda
> >> >> was able to postpone using catalytic converters for many years since
> >> >> it
> >> >> allowed their engines to be both fuel efficient and have low emissions
> >> >> (yes
> >> >> I know that the '86 has a cat, this started in '84 which was about 4
> >> >> or
> >> >> more
> >> >> years after most other US cars had cats).
> >> >>
> >> >
> >> >
> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> > converters. I kinda think that they reared their ugly head back around
> >> > 1980 by statute...
> >> >
> >> >
> >> >> Does the Weber carburetor you installed have a separate barrel for the
> >> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> >> fuel
> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> not
> >> >> the
> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> auxiliary
> >> >> valves, then it might seem that fuel mixture ignition would not occur
> >> >> as
> >> >> well as originally designed and the car might not pass an emissions
> >> >> inspection.
> >> >>
> >> >> Of course, the whole above discussion is mute if indeed the engine had
> >> >> the
> >> >> fuel injected head which did not have the CVCC valves.
> >> >>
> >> >> Eric
> >> >
> >> >
> >> > I'll be interested in responses to this as well since I'm making one
> >> > good car out of the two that I have and all them thar' vacuum hoses are
> >> > causing me nightmares and insomnia (as one might tell from the posting
> >> > hour of this note).
> >> >
> >> >
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
with several small "holes" in it.
If there is a way to put a normal carb on this setup, I am (like Perot)
all ears!
JT
Steve wrote:
>
> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This is
> what it has.
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414D2E89.F753106@doofis.FAKEcom...
> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am I
> > right on that assumption?
> >
> > JT
> >
> >
> >
> > Steve wrote:
> >>
> >> I'll eventually post a picture of the engine bay, it looks good with all
> >> the
> >> garbage out of there. That will convince you!
> >> Steve
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >
> >> >
> >> > Eric wrote:
> >> >>
> >> >> Steve wrote:
> >> >> >
> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> > carb
> >> >> > set
> >> >> > up. Primarally reason was to get it to run decent for the daughter.
> >> >>
> >> >> [snip]
> >> >>
> >> >> This has been an interesting discussion, especially if the original
> >> >> engine
> >> >> was carbureted. Honda used a three barrel carburetor. The auxiliary
> >> >> barrel
> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> mixture
> >> >> was
> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> which
> >> >> then
> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> primary
> >> >> and
> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> throttle
> >> >> such as when the car is under acceleration). By using this method,
> >> >> Honda
> >> >> was able to postpone using catalytic converters for many years since
> >> >> it
> >> >> allowed their engines to be both fuel efficient and have low emissions
> >> >> (yes
> >> >> I know that the '86 has a cat, this started in '84 which was about 4
> >> >> or
> >> >> more
> >> >> years after most other US cars had cats).
> >> >>
> >> >
> >> >
> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> > converters. I kinda think that they reared their ugly head back around
> >> > 1980 by statute...
> >> >
> >> >
> >> >> Does the Weber carburetor you installed have a separate barrel for the
> >> >> auxiliary valves? Or, did you switch over to a head that was for the
> >> >> fuel
> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark plug
> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> not
> >> >> the
> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> auxiliary
> >> >> valves, then it might seem that fuel mixture ignition would not occur
> >> >> as
> >> >> well as originally designed and the car might not pass an emissions
> >> >> inspection.
> >> >>
> >> >> Of course, the whole above discussion is mute if indeed the engine had
> >> >> the
> >> >> fuel injected head which did not have the CVCC valves.
> >> >>
> >> >> Eric
> >> >
> >> >
> >> > I'll be interested in responses to this as well since I'm making one
> >> > good car out of the two that I have and all them thar' vacuum hoses are
> >> > causing me nightmares and insomnia (as one might tell from the posting
> >> > hour of this note).
> >> >
> >> >
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-21-2004, 01:27 AM
#22
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
The adaptor plate and gasket was ported to the third small hole, I'm
assuming for the aux valve, so fuel and air can get there too. It's working
great. I was wondering what that 3rd hole was for, and now I know. I guess
It porting the main passage and the small one is enough to allow the fuel
air mixture to flow into the aux valve.
I don't know all the specifics, I just ordered the carb trusted the company.
They wanted to know what set up I had and any mods.
Turned the car over to the daughter today, In the year I have owned it, it
has never ran so good. No high idle or stalling
--
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414F412B.16CDABD4@doofis.FAKEcom...
> The CVCC engine head has three valves per cylinder. One of them is tiny
> with several small "holes" in it.
>
> If there is a way to put a normal carb on this setup, I am (like Perot)
> all ears!
>
> JT
>
>
>
>
> Steve wrote:
>>
>> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
>> is
>> what it has.
>> Stephen W. Hansen
>> ASE Certified Auto Technician
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414D2E89.F753106@doofis.FAKEcom...
>> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
>> > I
>> > right on that assumption?
>> >
>> > JT
>> >
>> >
>> >
>> > Steve wrote:
>> >>
>> >> I'll eventually post a picture of the engine bay, it looks good with
>> >> all
>> >> the
>> >> garbage out of there. That will convince you!
>> >> Steve
>> >>
>> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >> >
>> >> >
>> >> > Eric wrote:
>> >> >>
>> >> >> Steve wrote:
>> >> >> >
>> >> >> > Was just looking for a fix, i knew webers made a great all around
>> >> >> > carb
>> >> >> > set
>> >> >> > up. Primarally reason was to get it to run decent for the
>> >> >> > daughter.
>> >> >>
>> >> >> [snip]
>> >> >>
>> >> >> This has been an interesting discussion, especially if the original
>> >> >> engine
>> >> >> was carbureted. Honda used a three barrel carburetor. The
>> >> >> auxiliary
>> >> >> barrel
>> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> >> mixture
>> >> >> was
>> >> >> then ignited in the precombustion chamber eliciting a flame front
>> >> >> which
>> >> >> then
>> >> >> ignited a lean mixture that was fed to the cylinders through the
>> >> >> primary
>> >> >> and
>> >> >> secondary barrels (the latter typically only invoked under heavy
>> >> >> throttle
>> >> >> such as when the car is under acceleration). By using this method,
>> >> >> Honda
>> >> >> was able to postpone using catalytic converters for many years
>> >> >> since
>> >> >> it
>> >> >> allowed their engines to be both fuel efficient and have low
>> >> >> emissions
>> >> >> (yes
>> >> >> I know that the '86 has a cat, this started in '84 which was about
>> >> >> 4
>> >> >> or
>> >> >> more
>> >> >> years after most other US cars had cats).
>> >> >>
>> >> >
>> >> >
>> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> >> > converters. I kinda think that they reared their ugly head back
>> >> > around
>> >> > 1980 by statute...
>> >> >
>> >> >
>> >> >> Does the Weber carburetor you installed have a separate barrel for
>> >> >> the
>> >> >> auxiliary valves? Or, did you switch over to a head that was for
>> >> >> the
>> >> >> fuel
>> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
>> >> >> plug
>> >> >> electrode on the carbureted units was in the precombustion chamber,
>> >> >> not
>> >> >> the
>> >> >> main combustion chamber. If the Weber does not correctly feed the
>> >> >> auxiliary
>> >> >> valves, then it might seem that fuel mixture ignition would not
>> >> >> occur
>> >> >> as
>> >> >> well as originally designed and the car might not pass an emissions
>> >> >> inspection.
>> >> >>
>> >> >> Of course, the whole above discussion is mute if indeed the engine
>> >> >> had
>> >> >> the
>> >> >> fuel injected head which did not have the CVCC valves.
>> >> >>
>> >> >> Eric
>> >> >
>> >> >
>> >> > I'll be interested in responses to this as well since I'm making one
>> >> > good car out of the two that I have and all them thar' vacuum hoses
>> >> > are
>> >> > causing me nightmares and insomnia (as one might tell from the
>> >> > posting
>> >> > hour of this note).
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > JT
>> >> >
>> >> > Just tooling through cyberspace in my ancient G4
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
assuming for the aux valve, so fuel and air can get there too. It's working
great. I was wondering what that 3rd hole was for, and now I know. I guess
It porting the main passage and the small one is enough to allow the fuel
air mixture to flow into the aux valve.
I don't know all the specifics, I just ordered the carb trusted the company.
They wanted to know what set up I had and any mods.
Turned the car over to the daughter today, In the year I have owned it, it
has never ran so good. No high idle or stalling
--
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414F412B.16CDABD4@doofis.FAKEcom...
> The CVCC engine head has three valves per cylinder. One of them is tiny
> with several small "holes" in it.
>
> If there is a way to put a normal carb on this setup, I am (like Perot)
> all ears!
>
> JT
>
>
>
>
> Steve wrote:
>>
>> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
>> is
>> what it has.
>> Stephen W. Hansen
>> ASE Certified Auto Technician
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414D2E89.F753106@doofis.FAKEcom...
>> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
>> > I
>> > right on that assumption?
>> >
>> > JT
>> >
>> >
>> >
>> > Steve wrote:
>> >>
>> >> I'll eventually post a picture of the engine bay, it looks good with
>> >> all
>> >> the
>> >> garbage out of there. That will convince you!
>> >> Steve
>> >>
>> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >> >
>> >> >
>> >> > Eric wrote:
>> >> >>
>> >> >> Steve wrote:
>> >> >> >
>> >> >> > Was just looking for a fix, i knew webers made a great all around
>> >> >> > carb
>> >> >> > set
>> >> >> > up. Primarally reason was to get it to run decent for the
>> >> >> > daughter.
>> >> >>
>> >> >> [snip]
>> >> >>
>> >> >> This has been an interesting discussion, especially if the original
>> >> >> engine
>> >> >> was carbureted. Honda used a three barrel carburetor. The
>> >> >> auxiliary
>> >> >> barrel
>> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> >> mixture
>> >> >> was
>> >> >> then ignited in the precombustion chamber eliciting a flame front
>> >> >> which
>> >> >> then
>> >> >> ignited a lean mixture that was fed to the cylinders through the
>> >> >> primary
>> >> >> and
>> >> >> secondary barrels (the latter typically only invoked under heavy
>> >> >> throttle
>> >> >> such as when the car is under acceleration). By using this method,
>> >> >> Honda
>> >> >> was able to postpone using catalytic converters for many years
>> >> >> since
>> >> >> it
>> >> >> allowed their engines to be both fuel efficient and have low
>> >> >> emissions
>> >> >> (yes
>> >> >> I know that the '86 has a cat, this started in '84 which was about
>> >> >> 4
>> >> >> or
>> >> >> more
>> >> >> years after most other US cars had cats).
>> >> >>
>> >> >
>> >> >
>> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> >> > converters. I kinda think that they reared their ugly head back
>> >> > around
>> >> > 1980 by statute...
>> >> >
>> >> >
>> >> >> Does the Weber carburetor you installed have a separate barrel for
>> >> >> the
>> >> >> auxiliary valves? Or, did you switch over to a head that was for
>> >> >> the
>> >> >> fuel
>> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
>> >> >> plug
>> >> >> electrode on the carbureted units was in the precombustion chamber,
>> >> >> not
>> >> >> the
>> >> >> main combustion chamber. If the Weber does not correctly feed the
>> >> >> auxiliary
>> >> >> valves, then it might seem that fuel mixture ignition would not
>> >> >> occur
>> >> >> as
>> >> >> well as originally designed and the car might not pass an emissions
>> >> >> inspection.
>> >> >>
>> >> >> Of course, the whole above discussion is mute if indeed the engine
>> >> >> had
>> >> >> the
>> >> >> fuel injected head which did not have the CVCC valves.
>> >> >>
>> >> >> Eric
>> >> >
>> >> >
>> >> > I'll be interested in responses to this as well since I'm making one
>> >> > good car out of the two that I have and all them thar' vacuum hoses
>> >> > are
>> >> > causing me nightmares and insomnia (as one might tell from the
>> >> > posting
>> >> > hour of this note).
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > JT
>> >> >
>> >> > Just tooling through cyberspace in my ancient G4
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
09-21-2004, 01:27 AM
#23
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
The adaptor plate and gasket was ported to the third small hole, I'm
assuming for the aux valve, so fuel and air can get there too. It's working
great. I was wondering what that 3rd hole was for, and now I know. I guess
It porting the main passage and the small one is enough to allow the fuel
air mixture to flow into the aux valve.
I don't know all the specifics, I just ordered the carb trusted the company.
They wanted to know what set up I had and any mods.
Turned the car over to the daughter today, In the year I have owned it, it
has never ran so good. No high idle or stalling
--
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414F412B.16CDABD4@doofis.FAKEcom...
> The CVCC engine head has three valves per cylinder. One of them is tiny
> with several small "holes" in it.
>
> If there is a way to put a normal carb on this setup, I am (like Perot)
> all ears!
>
> JT
>
>
>
>
> Steve wrote:
>>
>> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
>> is
>> what it has.
>> Stephen W. Hansen
>> ASE Certified Auto Technician
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414D2E89.F753106@doofis.FAKEcom...
>> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
>> > I
>> > right on that assumption?
>> >
>> > JT
>> >
>> >
>> >
>> > Steve wrote:
>> >>
>> >> I'll eventually post a picture of the engine bay, it looks good with
>> >> all
>> >> the
>> >> garbage out of there. That will convince you!
>> >> Steve
>> >>
>> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >> >
>> >> >
>> >> > Eric wrote:
>> >> >>
>> >> >> Steve wrote:
>> >> >> >
>> >> >> > Was just looking for a fix, i knew webers made a great all around
>> >> >> > carb
>> >> >> > set
>> >> >> > up. Primarally reason was to get it to run decent for the
>> >> >> > daughter.
>> >> >>
>> >> >> [snip]
>> >> >>
>> >> >> This has been an interesting discussion, especially if the original
>> >> >> engine
>> >> >> was carbureted. Honda used a three barrel carburetor. The
>> >> >> auxiliary
>> >> >> barrel
>> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> >> mixture
>> >> >> was
>> >> >> then ignited in the precombustion chamber eliciting a flame front
>> >> >> which
>> >> >> then
>> >> >> ignited a lean mixture that was fed to the cylinders through the
>> >> >> primary
>> >> >> and
>> >> >> secondary barrels (the latter typically only invoked under heavy
>> >> >> throttle
>> >> >> such as when the car is under acceleration). By using this method,
>> >> >> Honda
>> >> >> was able to postpone using catalytic converters for many years
>> >> >> since
>> >> >> it
>> >> >> allowed their engines to be both fuel efficient and have low
>> >> >> emissions
>> >> >> (yes
>> >> >> I know that the '86 has a cat, this started in '84 which was about
>> >> >> 4
>> >> >> or
>> >> >> more
>> >> >> years after most other US cars had cats).
>> >> >>
>> >> >
>> >> >
>> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> >> > converters. I kinda think that they reared their ugly head back
>> >> > around
>> >> > 1980 by statute...
>> >> >
>> >> >
>> >> >> Does the Weber carburetor you installed have a separate barrel for
>> >> >> the
>> >> >> auxiliary valves? Or, did you switch over to a head that was for
>> >> >> the
>> >> >> fuel
>> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
>> >> >> plug
>> >> >> electrode on the carbureted units was in the precombustion chamber,
>> >> >> not
>> >> >> the
>> >> >> main combustion chamber. If the Weber does not correctly feed the
>> >> >> auxiliary
>> >> >> valves, then it might seem that fuel mixture ignition would not
>> >> >> occur
>> >> >> as
>> >> >> well as originally designed and the car might not pass an emissions
>> >> >> inspection.
>> >> >>
>> >> >> Of course, the whole above discussion is mute if indeed the engine
>> >> >> had
>> >> >> the
>> >> >> fuel injected head which did not have the CVCC valves.
>> >> >>
>> >> >> Eric
>> >> >
>> >> >
>> >> > I'll be interested in responses to this as well since I'm making one
>> >> > good car out of the two that I have and all them thar' vacuum hoses
>> >> > are
>> >> > causing me nightmares and insomnia (as one might tell from the
>> >> > posting
>> >> > hour of this note).
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > JT
>> >> >
>> >> > Just tooling through cyberspace in my ancient G4
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
assuming for the aux valve, so fuel and air can get there too. It's working
great. I was wondering what that 3rd hole was for, and now I know. I guess
It porting the main passage and the small one is enough to allow the fuel
air mixture to flow into the aux valve.
I don't know all the specifics, I just ordered the carb trusted the company.
They wanted to know what set up I had and any mods.
Turned the car over to the daughter today, In the year I have owned it, it
has never ran so good. No high idle or stalling
--
Stephen W. Hansen
ASE Certified Auto Technician
"Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
news:414F412B.16CDABD4@doofis.FAKEcom...
> The CVCC engine head has three valves per cylinder. One of them is tiny
> with several small "holes" in it.
>
> If there is a way to put a normal carb on this setup, I am (like Perot)
> all ears!
>
> JT
>
>
>
>
> Steve wrote:
>>
>> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
>> is
>> what it has.
>> Stephen W. Hansen
>> ASE Certified Auto Technician
>>
>> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> news:414D2E89.F753106@doofis.FAKEcom...
>> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
>> > I
>> > right on that assumption?
>> >
>> > JT
>> >
>> >
>> >
>> > Steve wrote:
>> >>
>> >> I'll eventually post a picture of the engine bay, it looks good with
>> >> all
>> >> the
>> >> garbage out of there. That will convince you!
>> >> Steve
>> >>
>> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
>> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
>> >> >
>> >> >
>> >> > Eric wrote:
>> >> >>
>> >> >> Steve wrote:
>> >> >> >
>> >> >> > Was just looking for a fix, i knew webers made a great all around
>> >> >> > carb
>> >> >> > set
>> >> >> > up. Primarally reason was to get it to run decent for the
>> >> >> > daughter.
>> >> >>
>> >> >> [snip]
>> >> >>
>> >> >> This has been an interesting discussion, especially if the original
>> >> >> engine
>> >> >> was carbureted. Honda used a three barrel carburetor. The
>> >> >> auxiliary
>> >> >> barrel
>> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
>> >> >> mixture
>> >> >> was
>> >> >> then ignited in the precombustion chamber eliciting a flame front
>> >> >> which
>> >> >> then
>> >> >> ignited a lean mixture that was fed to the cylinders through the
>> >> >> primary
>> >> >> and
>> >> >> secondary barrels (the latter typically only invoked under heavy
>> >> >> throttle
>> >> >> such as when the car is under acceleration). By using this method,
>> >> >> Honda
>> >> >> was able to postpone using catalytic converters for many years
>> >> >> since
>> >> >> it
>> >> >> allowed their engines to be both fuel efficient and have low
>> >> >> emissions
>> >> >> (yes
>> >> >> I know that the '86 has a cat, this started in '84 which was about
>> >> >> 4
>> >> >> or
>> >> >> more
>> >> >> years after most other US cars had cats).
>> >> >>
>> >> >
>> >> >
>> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
>> >> > converters. I kinda think that they reared their ugly head back
>> >> > around
>> >> > 1980 by statute...
>> >> >
>> >> >
>> >> >> Does the Weber carburetor you installed have a separate barrel for
>> >> >> the
>> >> >> auxiliary valves? Or, did you switch over to a head that was for
>> >> >> the
>> >> >> fuel
>> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
>> >> >> plug
>> >> >> electrode on the carbureted units was in the precombustion chamber,
>> >> >> not
>> >> >> the
>> >> >> main combustion chamber. If the Weber does not correctly feed the
>> >> >> auxiliary
>> >> >> valves, then it might seem that fuel mixture ignition would not
>> >> >> occur
>> >> >> as
>> >> >> well as originally designed and the car might not pass an emissions
>> >> >> inspection.
>> >> >>
>> >> >> Of course, the whole above discussion is mute if indeed the engine
>> >> >> had
>> >> >> the
>> >> >> fuel injected head which did not have the CVCC valves.
>> >> >>
>> >> >> Eric
>> >> >
>> >> >
>> >> > I'll be interested in responses to this as well since I'm making one
>> >> > good car out of the two that I have and all them thar' vacuum hoses
>> >> > are
>> >> > causing me nightmares and insomnia (as one might tell from the
>> >> > posting
>> >> > hour of this note).
>> >> >
>> >> >
>> >> >
>> >> > --
>> >> > JT
>> >> >
>> >> > Just tooling through cyberspace in my ancient G4
>> >
>> > --
>> > JT
>> >
>> > Just tooling through cyberspace in my ancient G4
>
> --
> JT
>
> Just tooling through cyberspace in my ancient G4
09-21-2004, 08:06 AM
#24
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
Steve,
Do you have the website and part numbers? Oh, and what is the size of
your engine? I'm dealing with the 1300 but I suspect that you have a
1,500.
But, I'm like you. I don't give a rat's patootie about the specifics,
just that it works...
JT
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
Do you have the website and part numbers? Oh, and what is the size of
your engine? I'm dealing with the 1300 but I suspect that you have a
1,500.
But, I'm like you. I don't give a rat's patootie about the specifics,
just that it works...
JT
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-21-2004, 08:06 AM
#25
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
Steve,
Do you have the website and part numbers? Oh, and what is the size of
your engine? I'm dealing with the 1300 but I suspect that you have a
1,500.
But, I'm like you. I don't give a rat's patootie about the specifics,
just that it works...
JT
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
Do you have the website and part numbers? Oh, and what is the size of
your engine? I'm dealing with the 1300 but I suspect that you have a
1,500.
But, I'm like you. I don't give a rat's patootie about the specifics,
just that it works...
JT
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-21-2004, 09:19 AM
#26
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
This is indeed good news! If I have any problem with the current carb,
it would be a great option for me in a couple of years since the car is
still subject to emissions testing until its twenty five years old.
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
it would be a great option for me in a couple of years since the car is
still subject to emissions testing until its twenty five years old.
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
09-21-2004, 09:19 AM
#27
Guest
Posts: n/a
Re: 86 civic Weber 2 barrel tuning
This is indeed good news! If I have any problem with the current carb,
it would be a great option for me in a couple of years since the car is
still subject to emissions testing until its twenty five years old.
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
it would be a great option for me in a couple of years since the car is
still subject to emissions testing until its twenty five years old.
Steve wrote:
>
> The adaptor plate and gasket was ported to the third small hole, I'm
> assuming for the aux valve, so fuel and air can get there too. It's working
> great. I was wondering what that 3rd hole was for, and now I know. I guess
> It porting the main passage and the small one is enough to allow the fuel
> air mixture to flow into the aux valve.
> I don't know all the specifics, I just ordered the carb trusted the company.
> They wanted to know what set up I had and any mods.
> Turned the car over to the daughter today, In the year I have owned it, it
> has never ran so good. No high idle or stalling
>
> --
> Stephen W. Hansen
> ASE Certified Auto Technician
>
> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> news:414F412B.16CDABD4@doofis.FAKEcom...
> > The CVCC engine head has three valves per cylinder. One of them is tiny
> > with several small "holes" in it.
> >
> > If there is a way to put a normal carb on this setup, I am (like Perot)
> > all ears!
> >
> > JT
> >
> >
> >
> >
> > Steve wrote:
> >>
> >> I'm assuming that a CVCC engine has 3 real valves and the aux valve. This
> >> is
> >> what it has.
> >> Stephen W. Hansen
> >> ASE Certified Auto Technician
> >>
> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> news:414D2E89.F753106@doofis.FAKEcom...
> >> > I'm assuming that it is not a CVCC engine (3 valves per cylinder). Am
> >> > I
> >> > right on that assumption?
> >> >
> >> > JT
> >> >
> >> >
> >> >
> >> > Steve wrote:
> >> >>
> >> >> I'll eventually post a picture of the engine bay, it looks good with
> >> >> all
> >> >> the
> >> >> garbage out of there. That will convince you!
> >> >> Steve
> >> >>
> >> >> "Grumpy au Contraire" <Grumpy@doofis.FAKEcom> wrote in message
> >> >> news:414BE56E.5AD24C8@doofis.FAKEcom...
> >> >> >
> >> >> >
> >> >> > Eric wrote:
> >> >> >>
> >> >> >> Steve wrote:
> >> >> >> >
> >> >> >> > Was just looking for a fix, i knew webers made a great all around
> >> >> >> > carb
> >> >> >> > set
> >> >> >> > up. Primarally reason was to get it to run decent for the
> >> >> >> > daughter.
> >> >> >>
> >> >> >> [snip]
> >> >> >>
> >> >> >> This has been an interesting discussion, especially if the original
> >> >> >> engine
> >> >> >> was carbureted. Honda used a three barrel carburetor. The
> >> >> >> auxiliary
> >> >> >> barrel
> >> >> >> fed a small quantity of a rich mixture to the CVCC valves. This
> >> >> >> mixture
> >> >> >> was
> >> >> >> then ignited in the precombustion chamber eliciting a flame front
> >> >> >> which
> >> >> >> then
> >> >> >> ignited a lean mixture that was fed to the cylinders through the
> >> >> >> primary
> >> >> >> and
> >> >> >> secondary barrels (the latter typically only invoked under heavy
> >> >> >> throttle
> >> >> >> such as when the car is under acceleration). By using this method,
> >> >> >> Honda
> >> >> >> was able to postpone using catalytic converters for many years
> >> >> >> since
> >> >> >> it
> >> >> >> allowed their engines to be both fuel efficient and have low
> >> >> >> emissions
> >> >> >> (yes
> >> >> >> I know that the '86 has a cat, this started in '84 which was about
> >> >> >> 4
> >> >> >> or
> >> >> >> more
> >> >> >> years after most other US cars had cats).
> >> >> >>
> >> >> >
> >> >> >
> >> >> > I just bought a 1982 & 83 1300 CVCC Civics and both had catalytic
> >> >> > converters. I kinda think that they reared their ugly head back
> >> >> > around
> >> >> > 1980 by statute...
> >> >> >
> >> >> >
> >> >> >> Does the Weber carburetor you installed have a separate barrel for
> >> >> >> the
> >> >> >> auxiliary valves? Or, did you switch over to a head that was for
> >> >> >> the
> >> >> >> fuel
> >> >> >> injected setup, e.g., '86 Si? If I remember correctly, the spark
> >> >> >> plug
> >> >> >> electrode on the carbureted units was in the precombustion chamber,
> >> >> >> not
> >> >> >> the
> >> >> >> main combustion chamber. If the Weber does not correctly feed the
> >> >> >> auxiliary
> >> >> >> valves, then it might seem that fuel mixture ignition would not
> >> >> >> occur
> >> >> >> as
> >> >> >> well as originally designed and the car might not pass an emissions
> >> >> >> inspection.
> >> >> >>
> >> >> >> Of course, the whole above discussion is mute if indeed the engine
> >> >> >> had
> >> >> >> the
> >> >> >> fuel injected head which did not have the CVCC valves.
> >> >> >>
> >> >> >> Eric
> >> >> >
> >> >> >
> >> >> > I'll be interested in responses to this as well since I'm making one
> >> >> > good car out of the two that I have and all them thar' vacuum hoses
> >> >> > are
> >> >> > causing me nightmares and insomnia (as one might tell from the
> >> >> > posting
> >> >> > hour of this note).
> >> >> >
> >> >> >
> >> >> >
> >> >> > --
> >> >> > JT
> >> >> >
> >> >> > Just tooling through cyberspace in my ancient G4
> >> >
> >> > --
> >> > JT
> >> >
> >> > Just tooling through cyberspace in my ancient G4
> >
> > --
> > JT
> >
> > Just tooling through cyberspace in my ancient G4
--
JT
Just tooling through cyberspace in my ancient G4
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)