Tegger®

"Cory Dunkle" <cadnews@verizon.net> melodiously murmured in
news:zMykb.3167$Vf7.1840@nwrdny02.gnilink.net:

> I just bought an '86 Prelude. ~10,000 miles on the clutch, ~194,000 on
> the transmission and ~90,000 on the engine.
>
> Most of the time after I first start it up when I put it in reverse it
> will grind slightly. It's a fast grinding then it slows down and goes
> into gear. When this first happened I thought maybe I was not pushing
> the clutch all the way down, but it's all the way against the floor.
>
> I'm thinking it's a simple matter of adjusting the clutch as it must
> be dragging a little. Oddly it seems to only do it the first time I
> put it in reverse after I start the car. After it has been running and
> I put it in reverse there is no grind. It also never grinds in any
> forward gears.
>
> Any ideas as to waht this is? How would I go about adjusting the
> clutch if that is likely to be the problem? Thanks.


If the pedal has an inch of very light pressure before it gets hard, the
freeplay is OK.

Are you letting the tranny spin in neutral before setting off? (It's good
practice to do so.) If so, I'll bet you're just trying too quickly to shift
into reverse. You need to give the countershaft ten seconds or so to stop
spinning.

You can force it to stop by moving the lever into first or third, and then
into reverse. This uses the synchros in the forward gears to stop the
counterhsaft so reverse won't grind.

--
TeGGeR®

Matt Craig

try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my 87
si prelude is like that

matt

Matt Craig

try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my 87
si prelude is like that

matt

Matt Craig

try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my 87
si prelude is like that

matt

Matt Craig

try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my 87
si prelude is like that

matt

Jafir Elkurd

First gear is synchronized. If it were not you'd have to come to a complete
stop before putting it in first. If you get a grinding in your prelude, you
may have something wrong.

" Matt Craig" <mcsk8er360@hotmail.com> wrote in message
news:bojivc$1flihm$1@ID-43596.news.uni-berlin.de...
> try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my
87
> si prelude is like that
>
> matt
>
>

Jafir Elkurd

First gear is synchronized. If it were not you'd have to come to a complete
stop before putting it in first. If you get a grinding in your prelude, you
may have something wrong.

" Matt Craig" <mcsk8er360@hotmail.com> wrote in message
news:bojivc$1flihm$1@ID-43596.news.uni-berlin.de...
> try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my
87
> si prelude is like that
>
> matt
>
>

Jafir Elkurd

First gear is synchronized. If it were not you'd have to come to a complete
stop before putting it in first. If you get a grinding in your prelude, you
may have something wrong.

" Matt Craig" <mcsk8er360@hotmail.com> wrote in message
news:bojivc$1flihm$1@ID-43596.news.uni-berlin.de...
> try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my
87
> si prelude is like that
>
> matt
>
>

Jafir Elkurd

First gear is synchronized. If it were not you'd have to come to a complete
stop before putting it in first. If you get a grinding in your prelude, you
may have something wrong.

" Matt Craig" <mcsk8er360@hotmail.com> wrote in message
news:bojivc$1flihm$1@ID-43596.news.uni-berlin.de...
> try shifting into 2nd & then reverse, 1rst isn't a synchronized gear. my
87
> si prelude is like that
>
> matt
>
>