GTcarz - Automotive forums for cars & trucks.

GTcarz - Automotive forums for cars & trucks. (https://www.gtcarz.com/)
-   Honda Mailing List (https://www.gtcarz.com/honda-mailing-list-327/)
-   -   90 accord transaxle filter (https://www.gtcarz.com/honda-mailing-list-327/90-accord-transaxle-filter-286788/)

strongs2 08-28-2004 07:49 PM

90 accord transaxle filter
 

Can anyone tell me how to change the filter for the transaxle?
The fluid is no problem, but it looks like I might have to drop th
passenger side of the transaxle to reach all the bolts.
Can this be right? I'm I not looking in the right spot

-
strongs
-----------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community
http://www.RealCarAudio.co
strongs2's Profile: http://www.realcaraudio.com/forums/m...nfo&userid=662
View this thread: http://www.realcaraudio.com/forums/s...threadid=13987


motsco_ _ 08-29-2004 01:15 AM

Re: 90 accord transaxle filter
 
strongs2 wrote:
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================


There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.

'Curly'


motsco_ _ 08-29-2004 01:15 AM

Re: 90 accord transaxle filter
 
strongs2 wrote:
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================


There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.

'Curly'



All times are GMT -4. The time now is 03:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03266 seconds with 3 queries