90 accord transaxle filter
08-28-2004, 07:49 PM
#1
Guest
Posts: n/a
90 accord transaxle filter
Can anyone tell me how to change the filter for the transaxle?
The fluid is no problem, but it looks like I might have to drop th
passenger side of the transaxle to reach all the bolts.
Can this be right? I'm I not looking in the right spot
-
strongs
-----------------------------------------------------------------------
Posted via RealCarAudio.com - The checkmate of the caraudio community
http://www.RealCarAudio.co
strongs2's Profile: http://www.realcaraudio.com/forums/m...nfo&userid=662
View this thread: http://www.realcaraudio.com/forums/s...threadid=13987
08-29-2004, 01:15 AM
#2
Guest
Posts: n/a
Re: 90 accord transaxle filter
strongs2 wrote:
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================
There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.
'Curly'
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================
There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.
'Curly'
08-29-2004, 01:15 AM
#3
Guest
Posts: n/a
Re: 90 accord transaxle filter
strongs2 wrote:
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================
There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.
'Curly'
> Can anyone tell me how to change the filter for the transaxle?
> The fluid is no problem, but it looks like I might have to drop the
> passenger side of the transaxle to reach all the bolts.
> Can this be right? I'm I not looking in the right spot?
>
> ==================
There is no filter that you can get at. Hold your 3/8" socket wrench in
hand. Remove the socket from the ratchet. Ratchet plugs into drain bolt
under right side of engine. Remove magnetic drain plug and drain HOT
tranny fluid into ice cream pail. Wipe off magnet, replace plug, refill
with Honda Z1, same amount you removed. Wait a week or two and do it
again. Repeat a third time if you feel rich. You may want to replace the
crush washer too.
'Curly'
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)