91 civic corrosion of rotor button
06-13-2005, 08:40 PM
#1
Guest
Posts: n/a
91 civic corrosion of rotor button
Hello all,
I was helping a friend recently with his 91 civic sedan (D15 engine code I
think). The car wouldn't start so we went through the ususal things and
finally arrived at the distributor. The contacts were corroded and we
cleaned them as a temporary fix. Car started right up. I suggested he
repalce the plugs, wires, cap and rotor button as a precaution. The cap and
rotor contacts were badly corroded. A couple of days later he had replaced
everything and the car ran fine for about three or four months.
Yesterday he called me because the car wouldn't start again. Again we
pulled the distributor cap to find that the new rotor button and contacts on
the cap were corroded. Though not as bad as the first time. Still they
were corroded bad enough that the car wouldn't start.
Why would these parts corrode that fast? We do live in a high-humidity
environment, but his is the only example of this I've seen. Is there some
sort of seal on the distributor cap that we missed? There wasn't one on it
to begin with, but that could have been ham-fisted by a previous owner.
This one is real a head scratcher for me. Any suggestions are appreciated
or advice would be greatly appreciated.
Thanks
Mike
I was helping a friend recently with his 91 civic sedan (D15 engine code I
think). The car wouldn't start so we went through the ususal things and
finally arrived at the distributor. The contacts were corroded and we
cleaned them as a temporary fix. Car started right up. I suggested he
repalce the plugs, wires, cap and rotor button as a precaution. The cap and
rotor contacts were badly corroded. A couple of days later he had replaced
everything and the car ran fine for about three or four months.
Yesterday he called me because the car wouldn't start again. Again we
pulled the distributor cap to find that the new rotor button and contacts on
the cap were corroded. Though not as bad as the first time. Still they
were corroded bad enough that the car wouldn't start.
Why would these parts corrode that fast? We do live in a high-humidity
environment, but his is the only example of this I've seen. Is there some
sort of seal on the distributor cap that we missed? There wasn't one on it
to begin with, but that could have been ham-fisted by a previous owner.
This one is real a head scratcher for me. Any suggestions are appreciated
or advice would be greatly appreciated.
Thanks
Mike
06-14-2005, 03:53 AM
#2
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
There is an O-ring that fits into the channel of the distributor cap. The
distributor cap should have come with one.
"Mike" <houchins_m@hotmail.com> wrote in message
news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
> Hello all,
>
> I was helping a friend recently with his 91 civic sedan (D15 engine code I
> think). The car wouldn't start so we went through the ususal things and
> finally arrived at the distributor. The contacts were corroded and we
> cleaned them as a temporary fix. Car started right up. I suggested he
> repalce the plugs, wires, cap and rotor button as a precaution. The cap
and
> rotor contacts were badly corroded. A couple of days later he had
replaced
> everything and the car ran fine for about three or four months.
>
> Yesterday he called me because the car wouldn't start again. Again we
> pulled the distributor cap to find that the new rotor button and contacts
on
> the cap were corroded. Though not as bad as the first time. Still they
> were corroded bad enough that the car wouldn't start.
>
> Why would these parts corrode that fast? We do live in a high-humidity
> environment, but his is the only example of this I've seen. Is there
some
> sort of seal on the distributor cap that we missed? There wasn't one on
it
> to begin with, but that could have been ham-fisted by a previous owner.
>
> This one is real a head scratcher for me. Any suggestions are appreciated
> or advice would be greatly appreciated.
>
> Thanks
>
> Mike
>
>
distributor cap should have come with one.
"Mike" <houchins_m@hotmail.com> wrote in message
news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
> Hello all,
>
> I was helping a friend recently with his 91 civic sedan (D15 engine code I
> think). The car wouldn't start so we went through the ususal things and
> finally arrived at the distributor. The contacts were corroded and we
> cleaned them as a temporary fix. Car started right up. I suggested he
> repalce the plugs, wires, cap and rotor button as a precaution. The cap
and
> rotor contacts were badly corroded. A couple of days later he had
replaced
> everything and the car ran fine for about three or four months.
>
> Yesterday he called me because the car wouldn't start again. Again we
> pulled the distributor cap to find that the new rotor button and contacts
on
> the cap were corroded. Though not as bad as the first time. Still they
> were corroded bad enough that the car wouldn't start.
>
> Why would these parts corrode that fast? We do live in a high-humidity
> environment, but his is the only example of this I've seen. Is there
some
> sort of seal on the distributor cap that we missed? There wasn't one on
it
> to begin with, but that could have been ham-fisted by a previous owner.
>
> This one is real a head scratcher for me. Any suggestions are appreciated
> or advice would be greatly appreciated.
>
> Thanks
>
> Mike
>
>
06-14-2005, 03:53 AM
#3
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
There is an O-ring that fits into the channel of the distributor cap. The
distributor cap should have come with one.
"Mike" <houchins_m@hotmail.com> wrote in message
news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
> Hello all,
>
> I was helping a friend recently with his 91 civic sedan (D15 engine code I
> think). The car wouldn't start so we went through the ususal things and
> finally arrived at the distributor. The contacts were corroded and we
> cleaned them as a temporary fix. Car started right up. I suggested he
> repalce the plugs, wires, cap and rotor button as a precaution. The cap
and
> rotor contacts were badly corroded. A couple of days later he had
replaced
> everything and the car ran fine for about three or four months.
>
> Yesterday he called me because the car wouldn't start again. Again we
> pulled the distributor cap to find that the new rotor button and contacts
on
> the cap were corroded. Though not as bad as the first time. Still they
> were corroded bad enough that the car wouldn't start.
>
> Why would these parts corrode that fast? We do live in a high-humidity
> environment, but his is the only example of this I've seen. Is there
some
> sort of seal on the distributor cap that we missed? There wasn't one on
it
> to begin with, but that could have been ham-fisted by a previous owner.
>
> This one is real a head scratcher for me. Any suggestions are appreciated
> or advice would be greatly appreciated.
>
> Thanks
>
> Mike
>
>
distributor cap should have come with one.
"Mike" <houchins_m@hotmail.com> wrote in message
news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
> Hello all,
>
> I was helping a friend recently with his 91 civic sedan (D15 engine code I
> think). The car wouldn't start so we went through the ususal things and
> finally arrived at the distributor. The contacts were corroded and we
> cleaned them as a temporary fix. Car started right up. I suggested he
> repalce the plugs, wires, cap and rotor button as a precaution. The cap
and
> rotor contacts were badly corroded. A couple of days later he had
replaced
> everything and the car ran fine for about three or four months.
>
> Yesterday he called me because the car wouldn't start again. Again we
> pulled the distributor cap to find that the new rotor button and contacts
on
> the cap were corroded. Though not as bad as the first time. Still they
> were corroded bad enough that the car wouldn't start.
>
> Why would these parts corrode that fast? We do live in a high-humidity
> environment, but his is the only example of this I've seen. Is there
some
> sort of seal on the distributor cap that we missed? There wasn't one on
it
> to begin with, but that could have been ham-fisted by a previous owner.
>
> This one is real a head scratcher for me. Any suggestions are appreciated
> or advice would be greatly appreciated.
>
> Thanks
>
> Mike
>
>
06-14-2005, 08:42 PM
#4
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
Thanks, I thought there might have been something like that. I'm sure the
cap was a cheap aftermarket unit and it may not have had one. I'll check
that and see. He'll be calling me again soon I'm sure.
Thanks a million
Mike
"Joseph Wind" <jw@neoplastic.ph.invalid> wrote in message
news:g2wre.13154$gL4.11382@trnddc07...
> There is an O-ring that fits into the channel of the distributor cap. The
> distributor cap should have come with one.
>
> "Mike" <houchins_m@hotmail.com> wrote in message
> news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
>> Hello all,
>>
>> I was helping a friend recently with his 91 civic sedan (D15 engine code
>> I
>> think). The car wouldn't start so we went through the ususal things and
>> finally arrived at the distributor. The contacts were corroded and we
>> cleaned them as a temporary fix. Car started right up. I suggested he
>> repalce the plugs, wires, cap and rotor button as a precaution. The cap
> and
>> rotor contacts were badly corroded. A couple of days later he had
> replaced
>> everything and the car ran fine for about three or four months.
>>
>> Yesterday he called me because the car wouldn't start again. Again we
>> pulled the distributor cap to find that the new rotor button and contacts
> on
>> the cap were corroded. Though not as bad as the first time. Still they
>> were corroded bad enough that the car wouldn't start.
>>
>> Why would these parts corrode that fast? We do live in a high-humidity
>> environment, but his is the only example of this I've seen. Is there
> some
>> sort of seal on the distributor cap that we missed? There wasn't one on
> it
>> to begin with, but that could have been ham-fisted by a previous owner.
>>
>> This one is real a head scratcher for me. Any suggestions are
>> appreciated
>> or advice would be greatly appreciated.
>>
>> Thanks
>>
>> Mike
>>
>>
>
>
cap was a cheap aftermarket unit and it may not have had one. I'll check
that and see. He'll be calling me again soon I'm sure.
Thanks a million
Mike
"Joseph Wind" <jw@neoplastic.ph.invalid> wrote in message
news:g2wre.13154$gL4.11382@trnddc07...
> There is an O-ring that fits into the channel of the distributor cap. The
> distributor cap should have come with one.
>
> "Mike" <houchins_m@hotmail.com> wrote in message
> news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
>> Hello all,
>>
>> I was helping a friend recently with his 91 civic sedan (D15 engine code
>> I
>> think). The car wouldn't start so we went through the ususal things and
>> finally arrived at the distributor. The contacts were corroded and we
>> cleaned them as a temporary fix. Car started right up. I suggested he
>> repalce the plugs, wires, cap and rotor button as a precaution. The cap
> and
>> rotor contacts were badly corroded. A couple of days later he had
> replaced
>> everything and the car ran fine for about three or four months.
>>
>> Yesterday he called me because the car wouldn't start again. Again we
>> pulled the distributor cap to find that the new rotor button and contacts
> on
>> the cap were corroded. Though not as bad as the first time. Still they
>> were corroded bad enough that the car wouldn't start.
>>
>> Why would these parts corrode that fast? We do live in a high-humidity
>> environment, but his is the only example of this I've seen. Is there
> some
>> sort of seal on the distributor cap that we missed? There wasn't one on
> it
>> to begin with, but that could have been ham-fisted by a previous owner.
>>
>> This one is real a head scratcher for me. Any suggestions are
>> appreciated
>> or advice would be greatly appreciated.
>>
>> Thanks
>>
>> Mike
>>
>>
>
>
06-14-2005, 08:42 PM
#5
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
Thanks, I thought there might have been something like that. I'm sure the
cap was a cheap aftermarket unit and it may not have had one. I'll check
that and see. He'll be calling me again soon I'm sure.
Thanks a million
Mike
"Joseph Wind" <jw@neoplastic.ph.invalid> wrote in message
news:g2wre.13154$gL4.11382@trnddc07...
> There is an O-ring that fits into the channel of the distributor cap. The
> distributor cap should have come with one.
>
> "Mike" <houchins_m@hotmail.com> wrote in message
> news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
>> Hello all,
>>
>> I was helping a friend recently with his 91 civic sedan (D15 engine code
>> I
>> think). The car wouldn't start so we went through the ususal things and
>> finally arrived at the distributor. The contacts were corroded and we
>> cleaned them as a temporary fix. Car started right up. I suggested he
>> repalce the plugs, wires, cap and rotor button as a precaution. The cap
> and
>> rotor contacts were badly corroded. A couple of days later he had
> replaced
>> everything and the car ran fine for about three or four months.
>>
>> Yesterday he called me because the car wouldn't start again. Again we
>> pulled the distributor cap to find that the new rotor button and contacts
> on
>> the cap were corroded. Though not as bad as the first time. Still they
>> were corroded bad enough that the car wouldn't start.
>>
>> Why would these parts corrode that fast? We do live in a high-humidity
>> environment, but his is the only example of this I've seen. Is there
> some
>> sort of seal on the distributor cap that we missed? There wasn't one on
> it
>> to begin with, but that could have been ham-fisted by a previous owner.
>>
>> This one is real a head scratcher for me. Any suggestions are
>> appreciated
>> or advice would be greatly appreciated.
>>
>> Thanks
>>
>> Mike
>>
>>
>
>
cap was a cheap aftermarket unit and it may not have had one. I'll check
that and see. He'll be calling me again soon I'm sure.
Thanks a million
Mike
"Joseph Wind" <jw@neoplastic.ph.invalid> wrote in message
news:g2wre.13154$gL4.11382@trnddc07...
> There is an O-ring that fits into the channel of the distributor cap. The
> distributor cap should have come with one.
>
> "Mike" <houchins_m@hotmail.com> wrote in message
> news:ADpre.95810$8S5.61313@bignews3.bellsouth.net. ..
>> Hello all,
>>
>> I was helping a friend recently with his 91 civic sedan (D15 engine code
>> I
>> think). The car wouldn't start so we went through the ususal things and
>> finally arrived at the distributor. The contacts were corroded and we
>> cleaned them as a temporary fix. Car started right up. I suggested he
>> repalce the plugs, wires, cap and rotor button as a precaution. The cap
> and
>> rotor contacts were badly corroded. A couple of days later he had
> replaced
>> everything and the car ran fine for about three or four months.
>>
>> Yesterday he called me because the car wouldn't start again. Again we
>> pulled the distributor cap to find that the new rotor button and contacts
> on
>> the cap were corroded. Though not as bad as the first time. Still they
>> were corroded bad enough that the car wouldn't start.
>>
>> Why would these parts corrode that fast? We do live in a high-humidity
>> environment, but his is the only example of this I've seen. Is there
> some
>> sort of seal on the distributor cap that we missed? There wasn't one on
> it
>> to begin with, but that could have been ham-fisted by a previous owner.
>>
>> This one is real a head scratcher for me. Any suggestions are
>> appreciated
>> or advice would be greatly appreciated.
>>
>> Thanks
>>
>> Mike
>>
>>
>
>
06-14-2005, 08:51 PM
#6
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
"D'Funk" <houchins_m@hotmail.com> wrote in
news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
Bad boy, D'Funk.
You have posted two separate messages to two separate groups with the same
subject. (rec.autos.makers.honda is the other one)
Not only can neither side see how the thread has evolved, but posters in
one can't be educated by messages in the other, and cannot correct mistakes
in the other messages.
You should have cross-posted.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
Bad boy, D'Funk.
You have posted two separate messages to two separate groups with the same
subject. (rec.autos.makers.honda is the other one)
Not only can neither side see how the thread has evolved, but posters in
one can't be educated by messages in the other, and cannot correct mistakes
in the other messages.
You should have cross-posted.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
06-14-2005, 08:51 PM
#7
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
"D'Funk" <houchins_m@hotmail.com> wrote in
news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
Bad boy, D'Funk.
You have posted two separate messages to two separate groups with the same
subject. (rec.autos.makers.honda is the other one)
Not only can neither side see how the thread has evolved, but posters in
one can't be educated by messages in the other, and cannot correct mistakes
in the other messages.
You should have cross-posted.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
Bad boy, D'Funk.
You have posted two separate messages to two separate groups with the same
subject. (rec.autos.makers.honda is the other one)
Not only can neither side see how the thread has evolved, but posters in
one can't be educated by messages in the other, and cannot correct mistakes
in the other messages.
You should have cross-posted.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
06-14-2005, 10:08 PM
#8
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
Sorry, Sometimes people in other groups get mad if you do cross post. They
say it attracts spammers. Next time I'll cross post it for auto
groups....<blush>.
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns9675D4361E1A3tegger@207.14.113.17...
> "D'Funk" <houchins_m@hotmail.com> wrote in
> news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
>
>
> Bad boy, D'Funk.
>
> You have posted two separate messages to two separate groups with the same
> subject. (rec.autos.makers.honda is the other one)
>
> Not only can neither side see how the thread has evolved, but posters in
> one can't be educated by messages in the other, and cannot correct
> mistakes
> in the other messages.
>
> You should have cross-posted.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
say it attracts spammers. Next time I'll cross post it for auto
groups....<blush>.
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns9675D4361E1A3tegger@207.14.113.17...
> "D'Funk" <houchins_m@hotmail.com> wrote in
> news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
>
>
> Bad boy, D'Funk.
>
> You have posted two separate messages to two separate groups with the same
> subject. (rec.autos.makers.honda is the other one)
>
> Not only can neither side see how the thread has evolved, but posters in
> one can't be educated by messages in the other, and cannot correct
> mistakes
> in the other messages.
>
> You should have cross-posted.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
06-14-2005, 10:08 PM
#9
Guest
Posts: n/a
Re: 91 civic corrosion of rotor button
Sorry, Sometimes people in other groups get mad if you do cross post. They
say it attracts spammers. Next time I'll cross post it for auto
groups....<blush>.
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns9675D4361E1A3tegger@207.14.113.17...
> "D'Funk" <houchins_m@hotmail.com> wrote in
> news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
>
>
> Bad boy, D'Funk.
>
> You have posted two separate messages to two separate groups with the same
> subject. (rec.autos.makers.honda is the other one)
>
> Not only can neither side see how the thread has evolved, but posters in
> one can't be educated by messages in the other, and cannot correct
> mistakes
> in the other messages.
>
> You should have cross-posted.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
say it attracts spammers. Next time I'll cross post it for auto
groups....<blush>.
"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns9675D4361E1A3tegger@207.14.113.17...
> "D'Funk" <houchins_m@hotmail.com> wrote in
> news:ZMKre.123215$J25.98680@bignews6.bellsouth.net :
>
>
> Bad boy, D'Funk.
>
> You have posted two separate messages to two separate groups with the same
> subject. (rec.autos.makers.honda is the other one)
>
> Not only can neither side see how the thread has evolved, but posters in
> one can't be educated by messages in the other, and cannot correct
> mistakes
> in the other messages.
>
> You should have cross-posted.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
KWW
Hyundai Mailing List
1
10-04-2004 01:03 PM
KR
Honda Mailing List
8
03-07-2004 01:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
