91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
 

I took my engine apart to replace all the stuff
that was destroyed on a timing belt break. I have
2 manuals Chittlins (chilton) and Haynes. Neither
addresses installation of "Cylinder Position
Indicator" which rotates with the exhaust cam
(B20A5 engine DOHC). I did a continuity check and
rotated the sensor. Every 360 there is a bump and
change in resistance.

Does it matter how it goes back in other than the
rotation tabs matched to the end of the camshaft?

TIA

Re: 91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
 

On Mon, 30 May 2005 19:41:35 -0700, san luis <sl@flex.com> wrote:

>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.

Re: 91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
 

On Mon, 30 May 2005 19:41:35 -0700, san luis <sl@flex.com> wrote:

>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.