91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
Guest
Posts: n/a
91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
I took my engine apart to replace all the stuff
that was destroyed on a timing belt break. I have
2 manuals Chittlins (chilton) and Haynes. Neither
addresses installation of "Cylinder Position
Indicator" which rotates with the exhaust cam
(B20A5 engine DOHC). I did a continuity check and
rotated the sensor. Every 360 there is a bump and
change in resistance.
Does it matter how it goes back in other than the
rotation tabs matched to the end of the camshaft?
TIA
that was destroyed on a timing belt break. I have
2 manuals Chittlins (chilton) and Haynes. Neither
addresses installation of "Cylinder Position
Indicator" which rotates with the exhaust cam
(B20A5 engine DOHC). I did a continuity check and
rotated the sensor. Every 360 there is a bump and
change in resistance.
Does it matter how it goes back in other than the
rotation tabs matched to the end of the camshaft?
TIA
Guest
Posts: n/a
Re: 91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
On Mon, 30 May 2005 19:41:35 -0700, san luis <sl@flex.com> wrote:
>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.
>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.
Guest
Posts: n/a
Re: 91 Prelude Cylinder Position Indicator Sensor question (aka TDC sensor)
On Mon, 30 May 2005 19:41:35 -0700, san luis <sl@flex.com> wrote:
>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.
>I took my engine apart to replace all the stuff
>that was destroyed on a timing belt break. I have
>2 manuals Chittlins (chilton) and Haynes. Neither
>addresses installation of "Cylinder Position
>Indicator" which rotates with the exhaust cam
>(B20A5 engine DOHC). I did a continuity check and
>rotated the sensor. Every 360 there is a bump and
>change in resistance.
>
>Does it matter how it goes back in other than the
>rotation tabs matched to the end of the camshaft?
>
>TIA
the tabs only line up one way just like a distributer.
Thread
Thread Starter
Forum
Replies
Last Post
honda video
Honda Videos
0
Mar 9, 2008 10:48 AM
honda video
Honda Videos
0
Feb 11, 2008 08:52 PM
honda video
Honda Videos
0
Feb 10, 2008 07:26 PM
san luis
Honda Mailing List
0
May 27, 2005 06:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)