92 Prelude Valves
11-01-2003, 02:54 AM
#1
Guest
Posts: n/a
92 Prelude Valves
Does anyone know the factory settings for adjusting the valves on a 92-96
Prelude Si 5 Speed, or where I may be able to find it out? They have been
loose for a while and are making a shaking metal sound, so I figure it's
time to tighten them up a little.
Any information would be greatly appreciated, and thanks a ton in advance.
TI
Prelude Si 5 Speed, or where I may be able to find it out? They have been
loose for a while and are making a shaking metal sound, so I figure it's
time to tighten them up a little.
Any information would be greatly appreciated, and thanks a ton in advance.
TI
11-01-2003, 03:16 AM
#2
Guest
Posts: n/a
Re: 92 Prelude Valves
Yup, they were right under the hood. That was simple enough. Thanks a lot!
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
11-01-2003, 03:16 AM
#3
Guest
Posts: n/a
Re: 92 Prelude Valves
Yup, they were right under the hood. That was simple enough. Thanks a lot!
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
11-01-2003, 03:16 AM
#4
Guest
Posts: n/a
Re: 92 Prelude Valves
Yup, they were right under the hood. That was simple enough. Thanks a lot!
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
11-01-2003, 03:16 AM
#5
Guest
Posts: n/a
Re: 92 Prelude Valves
Yup, they were right under the hood. That was simple enough. Thanks a lot!
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
> >
> > Does anyone know the factory settings for adjusting the valves on a
92-96
> > Prelude Si 5 Speed, or where I may be able to find it out? They have
been
> > loose for a while and are making a shaking metal sound, so I figure it's
> > time to tighten them up a little.
> >
> > Any information would be greatly appreciated, and thanks a ton in
advance.
> >
>
> The specs should be on the underhood sticker.
11-01-2003, 06:08 AM
#6
Guest
Posts: n/a
Re: 92 Prelude Valves
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
You're a day ahead of the rest of us <g>.
--
Brian
www.accesswave.ca/~orion
11-01-2003, 06:08 AM
#7
Guest
Posts: n/a
Re: 92 Prelude Valves
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
You're a day ahead of the rest of us <g>.
--
Brian
www.accesswave.ca/~orion
11-01-2003, 06:08 AM
#8
Guest
Posts: n/a
Re: 92 Prelude Valves
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
You're a day ahead of the rest of us <g>.
--
Brian
www.accesswave.ca/~orion
11-01-2003, 06:08 AM
#9
Guest
Posts: n/a
Re: 92 Prelude Valves
"Eric" <say.no@spam.now> wrote in message news:3FA4BA11.BB0D07C9@spam.now...
> aDiDaS85 wrote:
You're a day ahead of the rest of us <g>.
--
Brian
www.accesswave.ca/~orion
11-02-2003, 03:02 AM
#10
Guest
Posts: n/a
Re: 92 Prelude Valves
aDiDaS85 wrote:
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
11-02-2003, 03:02 AM
#11
Guest
Posts: n/a
Re: 92 Prelude Valves
aDiDaS85 wrote:
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
11-02-2003, 03:02 AM
#12
Guest
Posts: n/a
Re: 92 Prelude Valves
aDiDaS85 wrote:
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
11-02-2003, 03:02 AM
#13
Guest
Posts: n/a
Re: 92 Prelude Valves
aDiDaS85 wrote:
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
>
> Does anyone know the factory settings for adjusting the valves on a 92-96
> Prelude Si 5 Speed, or where I may be able to find it out? They have been
> loose for a while and are making a shaking metal sound, so I figure it's
> time to tighten them up a little.
>
> Any information would be greatly appreciated, and thanks a ton in advance.
>
The specs should be on the underhood sticker.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)