95' Civic Rocker Arm Assembly torque specification
02-10-2004, 06:37 PM
#2
Guest
Posts: n/a
Re: 95' Civic Rocker Arm Assembly torque specification
For the D16Z6 engine the torque for the bolts holding the rocker arm
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
02-10-2004, 06:37 PM
#3
Guest
Posts: n/a
Re: 95' Civic Rocker Arm Assembly torque specification
For the D16Z6 engine the torque for the bolts holding the rocker arm
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
02-10-2004, 06:37 PM
#4
Guest
Posts: n/a
Re: 95' Civic Rocker Arm Assembly torque specification
For the D16Z6 engine the torque for the bolts holding the rocker arm
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
02-10-2004, 06:37 PM
#5
Guest
Posts: n/a
Re: 95' Civic Rocker Arm Assembly torque specification
For the D16Z6 engine the torque for the bolts holding the rocker arm
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
assembly is 20 Nm or 14 lb ft. The service manual specifies the sequence
in which to tighten the bolts. I'll send you a scan of the service
manual to the "from" address from you post. If it is a decoy e-mail
address, post your real one and I'll send the scan there.
John wrote:
>
> What should the torque specification be set for a 95' honda civic v-tec sohc
> rocker arm assembly
>
> JOhn
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
