98 Accord EX Rear Caliper ?
04-23-2007, 09:02 PM
#1
Guest
Posts: n/a
98 Accord EX Rear Caliper ?
Going to help the neighbor replace the brakes on his Honda this Saturday.
The front brakes are no problem at all. I have a question on the rear that
pertains to the parking brake on the caliper. How difficult is this to
reset? I have looked in the normal places for assistance (AutoZone repair
guides) but they do not list this year. Any advice (or links) appreciated.
It looks like it is a mechanical cam through the caliper.
TIA
GM
The front brakes are no problem at all. I have a question on the rear that
pertains to the parking brake on the caliper. How difficult is this to
reset? I have looked in the normal places for assistance (AutoZone repair
guides) but they do not list this year. Any advice (or links) appreciated.
It looks like it is a mechanical cam through the caliper.
TIA
GM
04-23-2007, 09:50 PM
#2
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"GM" <comments7407@att.net.no.spam.net> wrote in
news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
> Going to help the neighbor replace the brakes on his Honda this
> Saturday. The front brakes are no problem at all.
They might be...Unless you know exactly what you're looking for, and what
you're looking at.
Honda brakes are a bit, well, finicky. Honda typically spends lots of money
on engines and "safety", but then recoups the cost on things like brakes.
> I have a question
> on the rear that pertains to the parking brake on the caliper. How
> difficult is this to reset? I have looked in the normal places for
> assistance (AutoZone repair guides) but they do not list this year.
> Any advice (or links) appreciated. It looks like it is a mechanical
> cam through the caliper.
>
>
If the parking brake is actuated through a lever on top of the caliper,
then the lever must be hard against its post (once piston slack is taken
up) before the cable is adjusted.
If the levers are not against their posts, back off the parking brake cable
adjuster until the levers are against their posts, then take up the parking
brake cable's slack.
Make certain that the clevises can swivel freely. If they are seized, PB
cable adjustments will be incorrect.
Incorrection will also result if the caliper pistons are seized, which is a
distressingly common occurrece.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
> Going to help the neighbor replace the brakes on his Honda this
> Saturday. The front brakes are no problem at all.
They might be...Unless you know exactly what you're looking for, and what
you're looking at.
Honda brakes are a bit, well, finicky. Honda typically spends lots of money
on engines and "safety", but then recoups the cost on things like brakes.
> I have a question
> on the rear that pertains to the parking brake on the caliper. How
> difficult is this to reset? I have looked in the normal places for
> assistance (AutoZone repair guides) but they do not list this year.
> Any advice (or links) appreciated. It looks like it is a mechanical
> cam through the caliper.
>
>
If the parking brake is actuated through a lever on top of the caliper,
then the lever must be hard against its post (once piston slack is taken
up) before the cable is adjusted.
If the levers are not against their posts, back off the parking brake cable
adjuster until the levers are against their posts, then take up the parking
brake cable's slack.
Make certain that the clevises can swivel freely. If they are seized, PB
cable adjustments will be incorrect.
Incorrection will also result if the caliper pistons are seized, which is a
distressingly common occurrece.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-23-2007, 09:50 PM
#3
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"GM" <comments7407@att.net.no.spam.net> wrote in
news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
> Going to help the neighbor replace the brakes on his Honda this
> Saturday. The front brakes are no problem at all.
They might be...Unless you know exactly what you're looking for, and what
you're looking at.
Honda brakes are a bit, well, finicky. Honda typically spends lots of money
on engines and "safety", but then recoups the cost on things like brakes.
> I have a question
> on the rear that pertains to the parking brake on the caliper. How
> difficult is this to reset? I have looked in the normal places for
> assistance (AutoZone repair guides) but they do not list this year.
> Any advice (or links) appreciated. It looks like it is a mechanical
> cam through the caliper.
>
>
If the parking brake is actuated through a lever on top of the caliper,
then the lever must be hard against its post (once piston slack is taken
up) before the cable is adjusted.
If the levers are not against their posts, back off the parking brake cable
adjuster until the levers are against their posts, then take up the parking
brake cable's slack.
Make certain that the clevises can swivel freely. If they are seized, PB
cable adjustments will be incorrect.
Incorrection will also result if the caliper pistons are seized, which is a
distressingly common occurrece.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
> Going to help the neighbor replace the brakes on his Honda this
> Saturday. The front brakes are no problem at all.
They might be...Unless you know exactly what you're looking for, and what
you're looking at.
Honda brakes are a bit, well, finicky. Honda typically spends lots of money
on engines and "safety", but then recoups the cost on things like brakes.
> I have a question
> on the rear that pertains to the parking brake on the caliper. How
> difficult is this to reset? I have looked in the normal places for
> assistance (AutoZone repair guides) but they do not list this year.
> Any advice (or links) appreciated. It looks like it is a mechanical
> cam through the caliper.
>
>
If the parking brake is actuated through a lever on top of the caliper,
then the lever must be hard against its post (once piston slack is taken
up) before the cable is adjusted.
If the levers are not against their posts, back off the parking brake cable
adjuster until the levers are against their posts, then take up the parking
brake cable's slack.
Make certain that the clevises can swivel freely. If they are seized, PB
cable adjustments will be incorrect.
Incorrection will also result if the caliper pistons are seized, which is a
distressingly common occurrece.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-23-2007, 09:58 PM
#4
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
Tegger wrote:
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of money
> on engines and "safety", but then recoups the cost on things like brakes.
now thats not fair! honda brakes are light and strong. light is good
for handling. light and strong is comparatively expensive. check out
some of that clunking junk ford use some time.
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year.
>> Any advice (or links) appreciated. It looks like it is a mechanical
>> cam through the caliper.
>>
>>
>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake cable
> adjuster until the levers are against their posts, then take up the parking
> brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is a
> distressingly common occurrece.
>
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of money
> on engines and "safety", but then recoups the cost on things like brakes.
now thats not fair! honda brakes are light and strong. light is good
for handling. light and strong is comparatively expensive. check out
some of that clunking junk ford use some time.
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year.
>> Any advice (or links) appreciated. It looks like it is a mechanical
>> cam through the caliper.
>>
>>
>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake cable
> adjuster until the levers are against their posts, then take up the parking
> brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is a
> distressingly common occurrece.
>
04-23-2007, 09:58 PM
#5
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
Tegger wrote:
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of money
> on engines and "safety", but then recoups the cost on things like brakes.
now thats not fair! honda brakes are light and strong. light is good
for handling. light and strong is comparatively expensive. check out
some of that clunking junk ford use some time.
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year.
>> Any advice (or links) appreciated. It looks like it is a mechanical
>> cam through the caliper.
>>
>>
>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake cable
> adjuster until the levers are against their posts, then take up the parking
> brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is a
> distressingly common occurrece.
>
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of money
> on engines and "safety", but then recoups the cost on things like brakes.
now thats not fair! honda brakes are light and strong. light is good
for handling. light and strong is comparatively expensive. check out
some of that clunking junk ford use some time.
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year.
>> Any advice (or links) appreciated. It looks like it is a mechanical
>> cam through the caliper.
>>
>>
>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake cable
> adjuster until the levers are against their posts, then take up the parking
> brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is a
> distressingly common occurrece.
>
04-24-2007, 07:56 AM
#6
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
jim beam <spamvortex@bad.example.net> wrote in
news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
> Tegger wrote:
>> "GM" <comments7407@att.net.no.spam.net> wrote in
>> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>>
>>> Going to help the neighbor replace the brakes on his Honda this
>>> Saturday. The front brakes are no problem at all.
>>
>>
>>
>> They might be...Unless you know exactly what you're looking for, and
>> what you're looking at.
>>
>> Honda brakes are a bit, well, finicky. Honda typically spends lots of
>> money on engines and "safety", but then recoups the cost on things
>> like brakes.
>
> now thats not fair! honda brakes are light and strong.
And seize/rust amazingly fast compared to, say, Toyota brakes.
> light is good
> for handling. light and strong is comparatively expensive. check out
> some of that clunking junk ford use some time.
I have. Plastic pistons? No thanks.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
> Tegger wrote:
>> "GM" <comments7407@att.net.no.spam.net> wrote in
>> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>>
>>> Going to help the neighbor replace the brakes on his Honda this
>>> Saturday. The front brakes are no problem at all.
>>
>>
>>
>> They might be...Unless you know exactly what you're looking for, and
>> what you're looking at.
>>
>> Honda brakes are a bit, well, finicky. Honda typically spends lots of
>> money on engines and "safety", but then recoups the cost on things
>> like brakes.
>
> now thats not fair! honda brakes are light and strong.
And seize/rust amazingly fast compared to, say, Toyota brakes.
> light is good
> for handling. light and strong is comparatively expensive. check out
> some of that clunking junk ford use some time.
I have. Plastic pistons? No thanks.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-24-2007, 07:56 AM
#7
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
jim beam <spamvortex@bad.example.net> wrote in
news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
> Tegger wrote:
>> "GM" <comments7407@att.net.no.spam.net> wrote in
>> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>>
>>> Going to help the neighbor replace the brakes on his Honda this
>>> Saturday. The front brakes are no problem at all.
>>
>>
>>
>> They might be...Unless you know exactly what you're looking for, and
>> what you're looking at.
>>
>> Honda brakes are a bit, well, finicky. Honda typically spends lots of
>> money on engines and "safety", but then recoups the cost on things
>> like brakes.
>
> now thats not fair! honda brakes are light and strong.
And seize/rust amazingly fast compared to, say, Toyota brakes.
> light is good
> for handling. light and strong is comparatively expensive. check out
> some of that clunking junk ford use some time.
I have. Plastic pistons? No thanks.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
> Tegger wrote:
>> "GM" <comments7407@att.net.no.spam.net> wrote in
>> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>>
>>> Going to help the neighbor replace the brakes on his Honda this
>>> Saturday. The front brakes are no problem at all.
>>
>>
>>
>> They might be...Unless you know exactly what you're looking for, and
>> what you're looking at.
>>
>> Honda brakes are a bit, well, finicky. Honda typically spends lots of
>> money on engines and "safety", but then recoups the cost on things
>> like brakes.
>
> now thats not fair! honda brakes are light and strong.
And seize/rust amazingly fast compared to, say, Toyota brakes.
> light is good
> for handling. light and strong is comparatively expensive. check out
> some of that clunking junk ford use some time.
I have. Plastic pistons? No thanks.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-24-2007, 08:53 AM
#8
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns991C5078BCA3Ftegger@207.14.116.130...
> jim beam <spamvortex@bad.example.net> wrote in
> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>
>>
>> light is good
>> for handling. light and strong is comparatively expensive. check out
>> some of that clunking junk ford use some time.
>
>
>
> I have. Plastic pistons? No thanks.
>
>
Plastic pistons?!?!
news:Xns991C5078BCA3Ftegger@207.14.116.130...
> jim beam <spamvortex@bad.example.net> wrote in
> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>
>>
>> light is good
>> for handling. light and strong is comparatively expensive. check out
>> some of that clunking junk ford use some time.
>
>
>
> I have. Plastic pistons? No thanks.
>
>
Plastic pistons?!?!
04-24-2007, 08:53 AM
#9
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns991C5078BCA3Ftegger@207.14.116.130...
> jim beam <spamvortex@bad.example.net> wrote in
> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>
>>
>> light is good
>> for handling. light and strong is comparatively expensive. check out
>> some of that clunking junk ford use some time.
>
>
>
> I have. Plastic pistons? No thanks.
>
>
Plastic pistons?!?!
news:Xns991C5078BCA3Ftegger@207.14.116.130...
> jim beam <spamvortex@bad.example.net> wrote in
> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>
>>
>> light is good
>> for handling. light and strong is comparatively expensive. check out
>> some of that clunking junk ford use some time.
>
>
>
> I have. Plastic pistons? No thanks.
>
>
Plastic pistons?!?!
04-24-2007, 10:01 AM
#10
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Michael Pardee" <michaeltnull@cybertrails.com> wrote in
news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>> jim beam <spamvortex@bad.example.net> wrote in
>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>
>>>
>>> light is good
>>> for handling. light and strong is comparatively expensive. check out
>>> some of that clunking junk ford use some time.
>>
>>
>>
>> I have. Plastic pistons? No thanks.
>>
>>
> Plastic pistons?!?!
>
>
>
>
Yep. Light-blue plastic. They crumble around the edges.
Wanna buy a Ford?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>> jim beam <spamvortex@bad.example.net> wrote in
>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>
>>>
>>> light is good
>>> for handling. light and strong is comparatively expensive. check out
>>> some of that clunking junk ford use some time.
>>
>>
>>
>> I have. Plastic pistons? No thanks.
>>
>>
> Plastic pistons?!?!
>
>
>
>
Yep. Light-blue plastic. They crumble around the edges.
Wanna buy a Ford?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-24-2007, 10:01 AM
#11
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Michael Pardee" <michaeltnull@cybertrails.com> wrote in
news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>> jim beam <spamvortex@bad.example.net> wrote in
>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>
>>>
>>> light is good
>>> for handling. light and strong is comparatively expensive. check out
>>> some of that clunking junk ford use some time.
>>
>>
>>
>> I have. Plastic pistons? No thanks.
>>
>>
> Plastic pistons?!?!
>
>
>
>
Yep. Light-blue plastic. They crumble around the edges.
Wanna buy a Ford?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>> jim beam <spamvortex@bad.example.net> wrote in
>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>
>>>
>>> light is good
>>> for handling. light and strong is comparatively expensive. check out
>>> some of that clunking junk ford use some time.
>>
>>
>>
>> I have. Plastic pistons? No thanks.
>>
>>
> Plastic pistons?!?!
>
>
>
>
Yep. Light-blue plastic. They crumble around the edges.
Wanna buy a Ford?
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
04-24-2007, 06:41 PM
#12
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns991C65CB5FD86tegger@207.14.116.130...
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>>> jim beam <spamvortex@bad.example.net> wrote in
>>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>>
>>>>
>>>> light is good
>>>> for handling. light and strong is comparatively expensive. check out
>>>> some of that clunking junk ford use some time.
>>>
>>>
>>>
>>> I have. Plastic pistons? No thanks.
>>>
>>>
>> Plastic pistons?!?!
>>
>>
>>
>>
>
>
> Yep. Light-blue plastic. They crumble around the edges.
>
> Wanna buy a Ford?
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
>
I was shocked when I found my (#2) son's Taurus with a 2.4 L engine had a
six inch clutch.
Mike
news:Xns991C65CB5FD86tegger@207.14.116.130...
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>>> jim beam <spamvortex@bad.example.net> wrote in
>>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>>
>>>>
>>>> light is good
>>>> for handling. light and strong is comparatively expensive. check out
>>>> some of that clunking junk ford use some time.
>>>
>>>
>>>
>>> I have. Plastic pistons? No thanks.
>>>
>>>
>> Plastic pistons?!?!
>>
>>
>>
>>
>
>
> Yep. Light-blue plastic. They crumble around the edges.
>
> Wanna buy a Ford?
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
>
I was shocked when I found my (#2) son's Taurus with a 2.4 L engine had a
six inch clutch.
Mike
04-24-2007, 06:41 PM
#13
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
"Tegger" <tegger@tegger.c0m> wrote in message
news:Xns991C65CB5FD86tegger@207.14.116.130...
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>>> jim beam <spamvortex@bad.example.net> wrote in
>>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>>
>>>>
>>>> light is good
>>>> for handling. light and strong is comparatively expensive. check out
>>>> some of that clunking junk ford use some time.
>>>
>>>
>>>
>>> I have. Plastic pistons? No thanks.
>>>
>>>
>> Plastic pistons?!?!
>>
>>
>>
>>
>
>
> Yep. Light-blue plastic. They crumble around the edges.
>
> Wanna buy a Ford?
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
>
I was shocked when I found my (#2) son's Taurus with a 2.4 L engine had a
six inch clutch.
Mike
news:Xns991C65CB5FD86tegger@207.14.116.130...
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:OpCdncRhHt4jYLDbnZ2dnUVZ_vGinZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns991C5078BCA3Ftegger@207.14.116.130...
>>> jim beam <spamvortex@bad.example.net> wrote in
>>> news:LL2dneB_SbHG-bDbnZ2dnUVZ_sLinZ2d@speakeasy.net:
>>>
>>>>
>>>> light is good
>>>> for handling. light and strong is comparatively expensive. check out
>>>> some of that clunking junk ford use some time.
>>>
>>>
>>>
>>> I have. Plastic pistons? No thanks.
>>>
>>>
>> Plastic pistons?!?!
>>
>>
>>
>>
>
>
> Yep. Light-blue plastic. They crumble around the edges.
>
> Wanna buy a Ford?
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/
>
I was shocked when I found my (#2) son's Taurus with a 2.4 L engine had a
six inch clutch.
Mike
04-24-2007, 10:27 PM
#14
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
On Tue, 24 Apr 2007 01:50:42 +0000, Tegger wrote:
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of
> money on engines and "safety", but then recoups the cost on things like
> brakes.
Are they still pressed on? My '88 and I think a friend's 91 had them
pressed on. They were a BITCH!
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year. Any
>> advice (or links) appreciated. It looks like it is a mechanical cam
>> through the caliper.
>>
>>
>>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake
> cable adjuster until the levers are against their posts, then take up the
> parking brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is
> a distressingly common occurrece.
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of
> money on engines and "safety", but then recoups the cost on things like
> brakes.
Are they still pressed on? My '88 and I think a friend's 91 had them
pressed on. They were a BITCH!
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year. Any
>> advice (or links) appreciated. It looks like it is a mechanical cam
>> through the caliper.
>>
>>
>>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake
> cable adjuster until the levers are against their posts, then take up the
> parking brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is
> a distressingly common occurrece.
04-24-2007, 10:27 PM
#15
Guest
Posts: n/a
Re: 98 Accord EX Rear Caliper ?
On Tue, 24 Apr 2007 01:50:42 +0000, Tegger wrote:
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of
> money on engines and "safety", but then recoups the cost on things like
> brakes.
Are they still pressed on? My '88 and I think a friend's 91 had them
pressed on. They were a BITCH!
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year. Any
>> advice (or links) appreciated. It looks like it is a mechanical cam
>> through the caliper.
>>
>>
>>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake
> cable adjuster until the levers are against their posts, then take up the
> parking brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is
> a distressingly common occurrece.
> "GM" <comments7407@att.net.no.spam.net> wrote in
> news:iGcXh.353033$5j1.124248@bgtnsc04-news.ops.worldnet.att.net:
>
>> Going to help the neighbor replace the brakes on his Honda this
>> Saturday. The front brakes are no problem at all.
>
>
>
> They might be...Unless you know exactly what you're looking for, and what
> you're looking at.
>
> Honda brakes are a bit, well, finicky. Honda typically spends lots of
> money on engines and "safety", but then recoups the cost on things like
> brakes.
Are they still pressed on? My '88 and I think a friend's 91 had them
pressed on. They were a BITCH!
>
>
>
>> I have a question
>> on the rear that pertains to the parking brake on the caliper. How
>> difficult is this to reset? I have looked in the normal places for
>> assistance (AutoZone repair guides) but they do not list this year. Any
>> advice (or links) appreciated. It looks like it is a mechanical cam
>> through the caliper.
>>
>>
>>
>
> If the parking brake is actuated through a lever on top of the caliper,
> then the lever must be hard against its post (once piston slack is taken
> up) before the cable is adjusted.
>
> If the levers are not against their posts, back off the parking brake
> cable adjuster until the levers are against their posts, then take up the
> parking brake cable's slack.
>
> Make certain that the clevises can swivel freely. If they are seized, PB
> cable adjustments will be incorrect.
>
> Incorrection will also result if the caliper pistons are seized, which is
> a distressingly common occurrece.
