98 civic rear hub replacement
05-07-2006, 09:12 AM
#1
Guest
Posts: n/a
98 civic rear hub replacement
Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
on my own. Wants to know what's involved and if I need to put bearing grease
on the new bearings and etc... What's the torque spec on tightening the
spindle nuts?? Please help.
on my own. Wants to know what's involved and if I need to put bearing grease
on the new bearings and etc... What's the torque spec on tightening the
spindle nuts?? Please help.
05-07-2006, 10:27 AM
#2
Guest
Posts: n/a
Re: 98 civic rear hub replacement
This is an expensive proposition, becuase those rear hubs are sealed units.
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
05-07-2006, 10:27 AM
#3
Guest
Posts: n/a
Re: 98 civic rear hub replacement
This is an expensive proposition, becuase those rear hubs are sealed units.
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
05-07-2006, 10:27 AM
#4
Guest
Posts: n/a
Re: 98 civic rear hub replacement
This is an expensive proposition, becuase those rear hubs are sealed units.
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Up here in Canada they go for $130 each from Honda. 110 from aftermarket.
Torque spec in my honda manual says 134 ftlbs.
t
grobo wrote:
>Have 98 Civic EX 20dr. nonABS. Think the rear hubs are bad. Want to replace
>on my own. Wants to know what's involved and if I need to put bearing grease
>on the new bearings and etc... What's the torque spec on tightening the
>spindle nuts?? Please help.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
05-07-2006, 10:56 AM
#5
Guest
Posts: n/a
Re: 98 civic rear hub replacement
grobo wrote:
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
05-07-2006, 10:56 AM
#6
Guest
Posts: n/a
Re: 98 civic rear hub replacement
grobo wrote:
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
05-07-2006, 10:56 AM
#7
Guest
Posts: n/a
Re: 98 civic rear hub replacement
grobo wrote:
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
>
> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
> on my own. Wants to know what's involved and if I need to put bearing grease
> on the new bearings and etc... What's the torque spec on tightening the
> spindle nuts?? Please help.
-------------------------------------
:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
I priced out NAPA and a couple others and found they can be had way
cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
Try www.slhondaparts.com for great exploded view diagrams and part lists
w/ pricing.
'Curly'
05-07-2006, 12:18 PM
#8
Guest
Posts: n/a
Re: 98 civic rear hub replacement
my prices are quoted in canadian, I have no doubt they are cheaper in the US.
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
05-07-2006, 12:18 PM
#9
Guest
Posts: n/a
Re: 98 civic rear hub replacement
my prices are quoted in canadian, I have no doubt they are cheaper in the US.
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
05-07-2006, 12:18 PM
#10
Guest
Posts: n/a
Re: 98 civic rear hub replacement
my prices are quoted in canadian, I have no doubt they are cheaper in the US.
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Still, very frustrating that you can't just use a press and replace just the
bearings.
'Curly Q. Links' wrote:
>> Have 98 Civic EX 20dr. non ABS. Think the rear hubs are bad. Want to replace
>> on my own. Wants to know what's involved and if I need to put bearing grease
>> on the new bearings and etc... What's the torque spec on tightening the
>> spindle nuts?? Please help.
>
>-------------------------------------
>
>:-) Those 20 door Civics are REALLY HARD on their bearings . . :-)
>
>I priced out NAPA and a couple others and found they can be had way
>cheaper. I'm talking Odyssey, but it's probably the same for the Civic.
>
>Try www.slhondaparts.com for great exploded view diagrams and part lists
>w/ pricing.
>
>'Curly'
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200605/1
Thread
Thread Starter
Forum
Replies
Last Post
frankenstein
Car Parts For Sale
2
09-22-2005 09:26 PM
frankenstein
Car Parts For Sale
6
09-14-2005 03:42 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
