ABS light sometimes stays on then sometimes turn off
Guest
Posts: n/a
ABS light sometimes stays on then sometimes turn off
Hi there
I have a 94 Honda Accord vtec. When i bought the car there was nothing
wrong with the ABS light. I noticed it started playing up when i
replaced the positive terminal which i didn’t have on tight enough.
Also i replaced my two front brake pads and gave it a oil change.
Could either of these have caused the problem with my ABS Module?
Could the problem be i didn’t bleed the brakes properly, didn’t add
enough brake fluid or could i have wrecked the sensor or wiring to the
sensors when putting in the brake pads?
At the moment its been at the mechanics going on 2weeks now, they had
replaced the ABS module with a second hand one but its still having
the same problem. Now they are telling me the secondhand module is
faulty so they are trying to find another car exactly the same so they
can test out the module to see if it is faulty, does this sound right?
Im trying to gather info to hurry them along because this is just
devastating that they don’t know whats wrong with it and they suppose
to be mechanics!
Can anyone help...Please
--
Posted at author's request, using http://www.AutoBoardz.com interface.
Articles individually moderated. Abuse/Problem? Report at http://www.AutoBoardz.com/contact.html
Thread archive: http://www.AutoBoardz.com/ABS-light-...ict235917.html
I have a 94 Honda Accord vtec. When i bought the car there was nothing
wrong with the ABS light. I noticed it started playing up when i
replaced the positive terminal which i didn’t have on tight enough.
Also i replaced my two front brake pads and gave it a oil change.
Could either of these have caused the problem with my ABS Module?
Could the problem be i didn’t bleed the brakes properly, didn’t add
enough brake fluid or could i have wrecked the sensor or wiring to the
sensors when putting in the brake pads?
At the moment its been at the mechanics going on 2weeks now, they had
replaced the ABS module with a second hand one but its still having
the same problem. Now they are telling me the secondhand module is
faulty so they are trying to find another car exactly the same so they
can test out the module to see if it is faulty, does this sound right?
Im trying to gather info to hurry them along because this is just
devastating that they don’t know whats wrong with it and they suppose
to be mechanics!
Can anyone help...Please
--
Posted at author's request, using http://www.AutoBoardz.com interface.
Articles individually moderated. Abuse/Problem? Report at http://www.AutoBoardz.com/contact.html
Thread archive: http://www.AutoBoardz.com/ABS-light-...ict235917.html
Guest
Posts: n/a
Re: ABS light sometimes stays on then sometimes turn off
geraldz wrote:
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn�t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
> Could the problem be i didn�t bleed the brakes properly, didn�t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
no, it sounds like they don't know what they're doing. if the light is
on, there will be a diagnostic code. that code will tell you [or them]
exactly what the problem is.
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don�t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
>
cars were driven for about 100 years /without/ abs. you could go on a
great driver training course with the money these clowns are costing you
and learn how to drive so that you'd never need it.
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn�t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
> Could the problem be i didn�t bleed the brakes properly, didn�t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
no, it sounds like they don't know what they're doing. if the light is
on, there will be a diagnostic code. that code will tell you [or them]
exactly what the problem is.
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don�t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
>
cars were driven for about 100 years /without/ abs. you could go on a
great driver training course with the money these clowns are costing you
and learn how to drive so that you'd never need it.
Guest
Posts: n/a
Re: ABS light sometimes stays on then sometimes turn off
On 4/22/08 2:22 AM, in article
1112640_f33aac677d60aefd81ae4343539b...toboard z.com, "geraldz"
<none@000.com> wrote:
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn‚t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
Probably not the positive terminal. Maybe the front brake job.
> Could the problem be i didn‚t bleed the brakes properly,
Maybe. If there is still air in the main lines it could confuse the ABS.
Did you bleed the ABS? Have you changed the ABS fluid? The ABS system has
its own separate fluid reservoir and is bled separately from the main
brakes.
> didn‚t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
Is the main reservoir up to the MAX line? If its too low, the "Brake" light
should come on. Sometimes both ABS and Brake will come on for low fluid.
Certainly the shop would have topped it off by now if that was the problem.
If it worked before you messed with the brakes & failed immediately after,
I'd say its more likely you did something at one of the wheels.
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
Two weeks? Sounds like they either aren't familiar enough with the system
to fix it or they have a payment due on their boat they would like you to
make for them.
The ABS modules can be problematic on this vintage of Honda. What is the
trouble code stored by the ABS when the light comes on? That will tell you
if its really the module (which is the most expensive component in the
system) or something simpler (cheaper) like a disconnected or dislodged
wheel sensor.
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don‚t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
ABS was an option on this generation of Honda. The main brakes are
completely functional without it. You might consider just taking the bulb
out of the light and remember to pump the brakes the next time you go into a
skid. To completely fix it could approach the current value of the car,
especially with the apparently clueless shop you are using.
1112640_f33aac677d60aefd81ae4343539b...toboard z.com, "geraldz"
<none@000.com> wrote:
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn‚t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
Probably not the positive terminal. Maybe the front brake job.
> Could the problem be i didn‚t bleed the brakes properly,
Maybe. If there is still air in the main lines it could confuse the ABS.
Did you bleed the ABS? Have you changed the ABS fluid? The ABS system has
its own separate fluid reservoir and is bled separately from the main
brakes.
> didn‚t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
Is the main reservoir up to the MAX line? If its too low, the "Brake" light
should come on. Sometimes both ABS and Brake will come on for low fluid.
Certainly the shop would have topped it off by now if that was the problem.
If it worked before you messed with the brakes & failed immediately after,
I'd say its more likely you did something at one of the wheels.
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
Two weeks? Sounds like they either aren't familiar enough with the system
to fix it or they have a payment due on their boat they would like you to
make for them.
The ABS modules can be problematic on this vintage of Honda. What is the
trouble code stored by the ABS when the light comes on? That will tell you
if its really the module (which is the most expensive component in the
system) or something simpler (cheaper) like a disconnected or dislodged
wheel sensor.
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don‚t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
ABS was an option on this generation of Honda. The main brakes are
completely functional without it. You might consider just taking the bulb
out of the light and remember to pump the brakes the next time you go into a
skid. To completely fix it could approach the current value of the car,
especially with the apparently clueless shop you are using.
Guest
Posts: n/a
Re: ABS light sometimes stays on then sometimes turn off
geraldz wrote:
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn’t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
> Could the problem be i didn’t bleed the brakes properly, didn’t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don’t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
>
==========================
You've fallen in among thieves. Incompetent ones at that. The tone rings
are probably just dirty or the sensor got some junk on it during the
service. The ABS system has diagnostic 'blink' codes that should have
told them what to fix first.
A Honda dealer would have had you fixed and out for a one hour charge.
Your ABS module is just as likely to fail as your main 'computer'(ECU).
Read this:
http://www.tegger.com/hondafaq/faq_ii.html#changeecu
'Curly'
> Hi there
> I have a 94 Honda Accord vtec. When i bought the car there was nothing
> wrong with the ABS light. I noticed it started playing up when i
> replaced the positive terminal which i didn’t have on tight enough.
> Also i replaced my two front brake pads and gave it a oil change.
> Could either of these have caused the problem with my ABS Module?
> Could the problem be i didn’t bleed the brakes properly, didn’t add
> enough brake fluid or could i have wrecked the sensor or wiring to the
> sensors when putting in the brake pads?
> At the moment its been at the mechanics going on 2weeks now, they had
> replaced the ABS module with a second hand one but its still having
> the same problem. Now they are telling me the secondhand module is
> faulty so they are trying to find another car exactly the same so they
> can test out the module to see if it is faulty, does this sound right?
>
> Im trying to gather info to hurry them along because this is just
> devastating that they don’t know whats wrong with it and they suppose
> to be mechanics!
>
> Can anyone help...Please
>
==========================
You've fallen in among thieves. Incompetent ones at that. The tone rings
are probably just dirty or the sensor got some junk on it during the
service. The ABS system has diagnostic 'blink' codes that should have
told them what to fix first.
A Honda dealer would have had you fixed and out for a one hour charge.
Your ABS module is just as likely to fail as your main 'computer'(ECU).
Read this:
http://www.tegger.com/hondafaq/faq_ii.html#changeecu
'Curly'
Guest
Posts: n/a
Re: ABS light sometimes stays on then sometimes turn off
I have a '94 GS-R and occasionally the ABS light will come on when I
start driving it. shutting the car off, then immediately restarting
it clears it and it doesn't come back on. Sometimes it will do it
frequently for a week or two but then it might not happen again for a
month or more.
Was your problem more consistent than that?
On Tue, 22 Apr 2008 07:22:08 GMT, geraldz <none@000.com> wrote:
>Hi there
>I have a 94 Honda Accord vtec. When i bought the car there was nothing
>wrong with the ABS light. I noticed it started playing up when i
>replaced the positive terminal which i didn’t have on tight enough.
>Also i replaced my two front brake pads and gave it a oil change.
>Could either of these have caused the problem with my ABS Module?
>Could the problem be i didn’t bleed the brakes properly, didn’t add
>enough brake fluid or could i have wrecked the sensor or wiring to the
>sensors when putting in the brake pads?
>At the moment its been at the mechanics going on 2weeks now, they had
>replaced the ABS module with a second hand one but its still having
>the same problem. Now they are telling me the secondhand module is
>faulty so they are trying to find another car exactly the same so they
>can test out the module to see if it is faulty, does this sound right?
>
>Im trying to gather info to hurry them along because this is just
>devastating that they don’t know whats wrong with it and they suppose
>to be mechanics!
>
>Can anyone help...Please
Thread
Thread Starter
Forum
Replies
Last Post
merlehaen@gmail.com
Honda Mailing List
1
May 29, 2009 11:18 AM
Russell M
Honda Accord
0
Jul 21, 2008 11:10 PM
RHODES_TC
Honda Accord
1
Feb 23, 2008 12:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
