Accessing Main Relay on 91 Accord?
Guest
Posts: n/a
Accessing Main Relay on 91 Accord?
I need to service the main relay, which is located somewhere
behind the driver's side dash, way up by the change dish.
I have been poking around with a mirror and a flashlight,
and I can't even _see_ this thing.
Can I access it more easily by removing the plastic surround
that runs from the change dish over to the center console?
It's a pain to remove, so I'm hoping someone here has
already tried it and can advise me.
Thanks
-Mark
behind the driver's side dash, way up by the change dish.
I have been poking around with a mirror and a flashlight,
and I can't even _see_ this thing.
Can I access it more easily by removing the plastic surround
that runs from the change dish over to the center console?
It's a pain to remove, so I'm hoping someone here has
already tried it and can advise me.
Thanks
-Mark
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
wrote:
>I need to service the main relay, which is located somewhere
>behind the driver's side dash, way up by the change dish.
>I have been poking around with a mirror and a flashlight,
>and I can't even _see_ this thing.
>
>Can I access it more easily by removing the plastic surround
>that runs from the change dish over to the center console?
You have to. It's waaay up there above the fuse panel.
They hung it from the factory ceiling and then built the car around
it! :-)
>It's a pain to remove, so I'm hoping someone here has
>already tried it and can advise me.
Remove the dash underpanel. Lie on the driver's side floorboards with
your head near the clutch pedal, looking upwards. Experience as a
contortionist helps. Never mind trying to unscrew the screw that holds
the relay to the instrument panel support. Just pry the plastic outer
case apart at the sides and slip the relay assembly out of its cover.
Here's what it looks like:
http://www3.telus.net/public/johnings/MainRelay.HTM
wrote:
>I need to service the main relay, which is located somewhere
>behind the driver's side dash, way up by the change dish.
>I have been poking around with a mirror and a flashlight,
>and I can't even _see_ this thing.
>
>Can I access it more easily by removing the plastic surround
>that runs from the change dish over to the center console?
You have to. It's waaay up there above the fuse panel.
They hung it from the factory ceiling and then built the car around
it! :-)
>It's a pain to remove, so I'm hoping someone here has
>already tried it and can advise me.
Remove the dash underpanel. Lie on the driver's side floorboards with
your head near the clutch pedal, looking upwards. Experience as a
contortionist helps. Never mind trying to unscrew the screw that holds
the relay to the instrument panel support. Just pry the plastic outer
case apart at the sides and slip the relay assembly out of its cover.
Here's what it looks like:
http://www3.telus.net/public/johnings/MainRelay.HTM
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
wrote:
>I need to service the main relay, which is located somewhere
>behind the driver's side dash, way up by the change dish.
>I have been poking around with a mirror and a flashlight,
>and I can't even _see_ this thing.
>
>Can I access it more easily by removing the plastic surround
>that runs from the change dish over to the center console?
You have to. It's waaay up there above the fuse panel.
They hung it from the factory ceiling and then built the car around
it! :-)
>It's a pain to remove, so I'm hoping someone here has
>already tried it and can advise me.
Remove the dash underpanel. Lie on the driver's side floorboards with
your head near the clutch pedal, looking upwards. Experience as a
contortionist helps. Never mind trying to unscrew the screw that holds
the relay to the instrument panel support. Just pry the plastic outer
case apart at the sides and slip the relay assembly out of its cover.
Here's what it looks like:
http://www3.telus.net/public/johnings/MainRelay.HTM
wrote:
>I need to service the main relay, which is located somewhere
>behind the driver's side dash, way up by the change dish.
>I have been poking around with a mirror and a flashlight,
>and I can't even _see_ this thing.
>
>Can I access it more easily by removing the plastic surround
>that runs from the change dish over to the center console?
You have to. It's waaay up there above the fuse panel.
They hung it from the factory ceiling and then built the car around
it! :-)
>It's a pain to remove, so I'm hoping someone here has
>already tried it and can advise me.
Remove the dash underpanel. Lie on the driver's side floorboards with
your head near the clutch pedal, looking upwards. Experience as a
contortionist helps. Never mind trying to unscrew the screw that holds
the relay to the instrument panel support. Just pry the plastic outer
case apart at the sides and slip the relay assembly out of its cover.
Here's what it looks like:
http://www3.telus.net/public/johnings/MainRelay.HTM
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
John Ings wrote:
> http://www3.telus.net/public/johnings/MainRelay.HTM
if vibration is what helps the joints break, wouldnt it make more sense
to hang the relay off a wiring harness with a zip tie to help absorb
vibration?
> http://www3.telus.net/public/johnings/MainRelay.HTM
if vibration is what helps the joints break, wouldnt it make more sense
to hang the relay off a wiring harness with a zip tie to help absorb
vibration?
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
John Ings wrote:
> http://www3.telus.net/public/johnings/MainRelay.HTM
if vibration is what helps the joints break, wouldnt it make more sense
to hang the relay off a wiring harness with a zip tie to help absorb
vibration?
> http://www3.telus.net/public/johnings/MainRelay.HTM
if vibration is what helps the joints break, wouldnt it make more sense
to hang the relay off a wiring harness with a zip tie to help absorb
vibration?
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
"SoCalMike" <mikein562athotmail@hotmail.com> wrote:
> John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense to
> hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
I'm considering placing a little Jesus statue on the dashboard,
and having him cradle the relay in His arms. :-)
-Mark
> John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense to
> hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
I'm considering placing a little Jesus statue on the dashboard,
and having him cradle the relay in His arms. :-)
-Mark
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
"SoCalMike" <mikein562athotmail@hotmail.com> wrote:
> John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense to
> hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
I'm considering placing a little Jesus statue on the dashboard,
and having him cradle the relay in His arms. :-)
-Mark
> John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense to
> hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
I'm considering placing a little Jesus statue on the dashboard,
and having him cradle the relay in His arms. :-)
-Mark
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
On Wed, 08 Sep 2004 18:36:11 GMT, SoCalMike
<mikein562athotmail@hotmail.com> wrote:
>John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>if vibration is what helps the joints break, wouldnt it make more sense
>to hang the relay off a wiring harness with a zip tie to help absorb
>vibration?
You would think so. Probably a good idea if you're replacing the relay
rather than just re-soldering the PC board.
<mikein562athotmail@hotmail.com> wrote:
>John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>if vibration is what helps the joints break, wouldnt it make more sense
>to hang the relay off a wiring harness with a zip tie to help absorb
>vibration?
You would think so. Probably a good idea if you're replacing the relay
rather than just re-soldering the PC board.
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
On Wed, 08 Sep 2004 18:36:11 GMT, SoCalMike
<mikein562athotmail@hotmail.com> wrote:
>John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>if vibration is what helps the joints break, wouldnt it make more sense
>to hang the relay off a wiring harness with a zip tie to help absorb
>vibration?
You would think so. Probably a good idea if you're replacing the relay
rather than just re-soldering the PC board.
<mikein562athotmail@hotmail.com> wrote:
>John Ings wrote:
>
>> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>if vibration is what helps the joints break, wouldnt it make more sense
>to hang the relay off a wiring harness with a zip tie to help absorb
>vibration?
You would think so. Probably a good idea if you're replacing the relay
rather than just re-soldering the PC board.
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
It also helps if you remove the cruise control module (big silver box).
"John Ings" <nodamned@spam.org> wrote in message
news:dnguj01lrs621c1pbtcd60ru8dif1iatg6@4ax.com...
> On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
> wrote:
>
> >I need to service the main relay, which is located somewhere
> >behind the driver's side dash, way up by the change dish.
> >I have been poking around with a mirror and a flashlight,
> >and I can't even _see_ this thing.
> >
> >Can I access it more easily by removing the plastic surround
> >that runs from the change dish over to the center console?
>
> You have to. It's waaay up there above the fuse panel.
> They hung it from the factory ceiling and then built the car around
> it! :-)
>
> >It's a pain to remove, so I'm hoping someone here has
> >already tried it and can advise me.
>
> Remove the dash underpanel. Lie on the driver's side floorboards with
> your head near the clutch pedal, looking upwards. Experience as a
> contortionist helps. Never mind trying to unscrew the screw that holds
> the relay to the instrument panel support. Just pry the plastic outer
> case apart at the sides and slip the relay assembly out of its cover.
> Here's what it looks like:
> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>
>
"John Ings" <nodamned@spam.org> wrote in message
news:dnguj01lrs621c1pbtcd60ru8dif1iatg6@4ax.com...
> On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
> wrote:
>
> >I need to service the main relay, which is located somewhere
> >behind the driver's side dash, way up by the change dish.
> >I have been poking around with a mirror and a flashlight,
> >and I can't even _see_ this thing.
> >
> >Can I access it more easily by removing the plastic surround
> >that runs from the change dish over to the center console?
>
> You have to. It's waaay up there above the fuse panel.
> They hung it from the factory ceiling and then built the car around
> it! :-)
>
> >It's a pain to remove, so I'm hoping someone here has
> >already tried it and can advise me.
>
> Remove the dash underpanel. Lie on the driver's side floorboards with
> your head near the clutch pedal, looking upwards. Experience as a
> contortionist helps. Never mind trying to unscrew the screw that holds
> the relay to the instrument panel support. Just pry the plastic outer
> case apart at the sides and slip the relay assembly out of its cover.
> Here's what it looks like:
> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>
>
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
It also helps if you remove the cruise control module (big silver box).
"John Ings" <nodamned@spam.org> wrote in message
news:dnguj01lrs621c1pbtcd60ru8dif1iatg6@4ax.com...
> On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
> wrote:
>
> >I need to service the main relay, which is located somewhere
> >behind the driver's side dash, way up by the change dish.
> >I have been poking around with a mirror and a flashlight,
> >and I can't even _see_ this thing.
> >
> >Can I access it more easily by removing the plastic surround
> >that runs from the change dish over to the center console?
>
> You have to. It's waaay up there above the fuse panel.
> They hung it from the factory ceiling and then built the car around
> it! :-)
>
> >It's a pain to remove, so I'm hoping someone here has
> >already tried it and can advise me.
>
> Remove the dash underpanel. Lie on the driver's side floorboards with
> your head near the clutch pedal, looking upwards. Experience as a
> contortionist helps. Never mind trying to unscrew the screw that holds
> the relay to the instrument panel support. Just pry the plastic outer
> case apart at the sides and slip the relay assembly out of its cover.
> Here's what it looks like:
> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>
>
"John Ings" <nodamned@spam.org> wrote in message
news:dnguj01lrs621c1pbtcd60ru8dif1iatg6@4ax.com...
> On Wed, 8 Sep 2004 09:46:36 -0700, "Mark" <nospam@thanksanyway.org>
> wrote:
>
> >I need to service the main relay, which is located somewhere
> >behind the driver's side dash, way up by the change dish.
> >I have been poking around with a mirror and a flashlight,
> >and I can't even _see_ this thing.
> >
> >Can I access it more easily by removing the plastic surround
> >that runs from the change dish over to the center console?
>
> You have to. It's waaay up there above the fuse panel.
> They hung it from the factory ceiling and then built the car around
> it! :-)
>
> >It's a pain to remove, so I'm hoping someone here has
> >already tried it and can advise me.
>
> Remove the dash underpanel. Lie on the driver's side floorboards with
> your head near the clutch pedal, looking upwards. Experience as a
> contortionist helps. Never mind trying to unscrew the screw that holds
> the relay to the instrument panel support. Just pry the plastic outer
> case apart at the sides and slip the relay assembly out of its cover.
> Here's what it looks like:
> http://www3.telus.net/public/johnings/MainRelay.HTM
>
>
>
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
It's not vibration as much as the "cold solder" joints that crystallize over
time and cause a void around the mounting pins for the relay.
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:viI%c.158602$mD.151393@attbi_s02...
> John Ings wrote:
>
> > http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense
> to hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
time and cause a void around the mounting pins for the relay.
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:viI%c.158602$mD.151393@attbi_s02...
> John Ings wrote:
>
> > http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense
> to hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
It's not vibration as much as the "cold solder" joints that crystallize over
time and cause a void around the mounting pins for the relay.
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:viI%c.158602$mD.151393@attbi_s02...
> John Ings wrote:
>
> > http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense
> to hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
time and cause a void around the mounting pins for the relay.
"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:viI%c.158602$mD.151393@attbi_s02...
> John Ings wrote:
>
> > http://www3.telus.net/public/johnings/MainRelay.HTM
>
> if vibration is what helps the joints break, wouldnt it make more sense
> to hang the relay off a wiring harness with a zip tie to help absorb
> vibration?
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
"Grahame" <grahame.joyce@sympatico.ca> wrote:
> It also helps if you remove the cruise control module (big silver box).
Yep, that was the key. The main relay is directly above it. Removing
the instrument surround didn't help at all. The cooling fan timer unit
is bolted on top of the main relay bracket and I couldn't figure out how
to remove it, so I pried the relay out of the plastic case, as suggested.
One of the solder joints had obvious damage from arcing.
I re-flowed the solder joints and reinstalled the relay, and the car runs
fine.
-Mark
Guest
Posts: n/a
Re: Accessing Main Relay on 91 Accord?
"Grahame" <grahame.joyce@sympatico.ca> wrote:
> It also helps if you remove the cruise control module (big silver box).
Yep, that was the key. The main relay is directly above it. Removing
the instrument surround didn't help at all. The cooling fan timer unit
is bolted on top of the main relay bracket and I couldn't figure out how
to remove it, so I pried the relay out of the plastic case, as suggested.
One of the solder joints had obvious damage from arcing.
I re-flowed the solder joints and reinstalled the relay, and the car runs
fine.
-Mark
Thread
Thread Starter
Forum
Replies
Last Post
Jay W
Honda Accord
2
Jun 28, 2007 11:11 PM
Rob
Honda Mailing List
16
Dec 6, 2004 05:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
