Someone@somewhere.space

On Mon, 19 Jan 2004 01:22:25 GMT, "LAAAADEEEDAAAA"
<ladeedaa@columbus.rr.com> wrote:

>i had a 1990 accord and it would drive fine but after about 4 or 5 miles of
>driveing the grease in the cv joint would thin out and the bearings would
>move and cause i vibration. so it could be the cv joint.
>
>
>"amsjsj" <amsjsj@***.net> wrote in message
>news:Q0cNb.1201$_H5.1152@lakeread06...
>> Your rotors need to be cut, same exact problem i had.
>>
>> "Newsgroups" <jetking@pacbell.net> wrote in message
>> news:0pCLb.8984$km2.7923@newssvr25.news.prodigy.co m...
>> > I am having high speed vibration problems when I apply the breaks at
>about
>> > 50 mph and above, the front end shimmies like crazy. Once I release the
>> > brake pedal, it goes away. Is this an idication of an alignment problem
>or
>> a
>> > break problem? Thanks for the help.
>> >
>> > Turbineking99
>> >
>> >
>>
>>
>
Just took my Accord 2003 V6 to the dealer for it's regularly scheduled
maintenance. At the same time I told them of the same vibration on the
brake pedal when braking at high speeds. Turned out to be exactly the
same rotor warp everyone else has been having in the 03 Accords.

Luckily they covered it under warranty because the brake pads had to
be replaced also.

Shouldn't Honda send out a recall notice? This could potentially be a
very dangerous flaw

- Mark

Someone@somewhere.space

On Mon, 19 Jan 2004 01:22:25 GMT, "LAAAADEEEDAAAA"
<ladeedaa@columbus.rr.com> wrote:

>i had a 1990 accord and it would drive fine but after about 4 or 5 miles of
>driveing the grease in the cv joint would thin out and the bearings would
>move and cause i vibration. so it could be the cv joint.
>
>
>"amsjsj" <amsjsj@***.net> wrote in message
>news:Q0cNb.1201$_H5.1152@lakeread06...
>> Your rotors need to be cut, same exact problem i had.
>>
>> "Newsgroups" <jetking@pacbell.net> wrote in message
>> news:0pCLb.8984$km2.7923@newssvr25.news.prodigy.co m...
>> > I am having high speed vibration problems when I apply the breaks at
>about
>> > 50 mph and above, the front end shimmies like crazy. Once I release the
>> > brake pedal, it goes away. Is this an idication of an alignment problem
>or
>> a
>> > break problem? Thanks for the help.
>> >
>> > Turbineking99
>> >
>> >
>>
>>
>
Just took my Accord 2003 V6 to the dealer for it's regularly scheduled
maintenance. At the same time I told them of the same vibration on the
brake pedal when braking at high speeds. Turned out to be exactly the
same rotor warp everyone else has been having in the 03 Accords.

Luckily they covered it under warranty because the brake pads had to
be replaced also.

Shouldn't Honda send out a recall notice? This could potentially be a
very dangerous flaw

- Mark

Someone@somewhere.space

On Mon, 19 Jan 2004 01:22:25 GMT, "LAAAADEEEDAAAA"
<ladeedaa@columbus.rr.com> wrote:

>i had a 1990 accord and it would drive fine but after about 4 or 5 miles of
>driveing the grease in the cv joint would thin out and the bearings would
>move and cause i vibration. so it could be the cv joint.
>
>
>"amsjsj" <amsjsj@***.net> wrote in message
>news:Q0cNb.1201$_H5.1152@lakeread06...
>> Your rotors need to be cut, same exact problem i had.
>>
>> "Newsgroups" <jetking@pacbell.net> wrote in message
>> news:0pCLb.8984$km2.7923@newssvr25.news.prodigy.co m...
>> > I am having high speed vibration problems when I apply the breaks at
>about
>> > 50 mph and above, the front end shimmies like crazy. Once I release the
>> > brake pedal, it goes away. Is this an idication of an alignment problem
>or
>> a
>> > break problem? Thanks for the help.
>> >
>> > Turbineking99
>> >
>> >
>>
>>
>
Just took my Accord 2003 V6 to the dealer for it's regularly scheduled
maintenance. At the same time I told them of the same vibration on the
brake pedal when braking at high speeds. Turned out to be exactly the
same rotor warp everyone else has been having in the 03 Accords.

Luckily they covered it under warranty because the brake pads had to
be replaced also.

Shouldn't Honda send out a recall notice? This could potentially be a
very dangerous flaw

- Mark