Caliper sliding pin boots
Guest
Posts: n/a
Re: Caliper sliding pin boots
"Michael Pardee" <michaeltnull@cybertrails.com> wrote in
news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>
>>
>> Whatever that tube had in it, it certainly wasn't the stuff that's
>> been sold to me as "Sil-Glyde" for two decades.
>>
>
> There is a black market for almost everything - maybe it was bogus and
> got into the store's supply stream.
>
Maybe it had melamine in it.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
> "Tegger" <tegger@tegger.c0m> wrote in message
> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>
>>
>> Whatever that tube had in it, it certainly wasn't the stuff that's
>> been sold to me as "Sil-Glyde" for two decades.
>>
>
> There is a black market for almost everything - maybe it was bogus and
> got into the store's supply stream.
>
Maybe it had melamine in it.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>>
>>> Whatever that tube had in it, it certainly wasn't the stuff that's
>>> been sold to me as "Sil-Glyde" for two decades.
>>>
>> There is a black market for almost everything - maybe it was bogus and
>> got into the store's supply stream.
>>
>
>
>
> Maybe it had melamine in it.
>
>
maybe indeed. even the stuff in the tube turned into a brown sticky goo.
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>>
>>> Whatever that tube had in it, it certainly wasn't the stuff that's
>>> been sold to me as "Sil-Glyde" for two decades.
>>>
>> There is a black market for almost everything - maybe it was bogus and
>> got into the store's supply stream.
>>
>
>
>
> Maybe it had melamine in it.
>
>
maybe indeed. even the stuff in the tube turned into a brown sticky goo.
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>>
>>> Whatever that tube had in it, it certainly wasn't the stuff that's
>>> been sold to me as "Sil-Glyde" for two decades.
>>>
>> There is a black market for almost everything - maybe it was bogus and
>> got into the store's supply stream.
>>
>
>
>
> Maybe it had melamine in it.
>
>
maybe indeed. even the stuff in the tube turned into a brown sticky goo.
> "Michael Pardee" <michaeltnull@cybertrails.com> wrote in
> news:Po-dnQ3hru3c9t7bnZ2dnUVZ_vamnZ2d@sedona.net:
>
>> "Tegger" <tegger@tegger.c0m> wrote in message
>> news:Xns992C7AA1F5CB2tegger@207.14.116.130...
>>>
>>> Whatever that tube had in it, it certainly wasn't the stuff that's
>>> been sold to me as "Sil-Glyde" for two decades.
>>>
>> There is a black market for almost everything - maybe it was bogus and
>> got into the store's supply stream.
>>
>
>
>
> Maybe it had melamine in it.
>
>
maybe indeed. even the stuff in the tube turned into a brown sticky goo.
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
>>> Been using Sil-Glyde for twenty years. Never a problem. I still have
>>> all eitght original pin boots on my brakes and they do not even show
>[quoted text clipped - 7 lines]
>> lube, there's some stuff by bendix that's supposed to be good and dow
>> corning's molykote m77 is i understand oem lube for the sliders.
>
>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I don't
>know what you were using, but it sure wasn't Sil-Glyde.
>
Do they even make Sil-Glyde anymore? I used to use it regularly and then I
noticed that I could no longer find it in the stores anymore. I looked around
online and I'm prettty sure I read that it had been taken of the market. Am I
mistaken? I haven't seen it in the stores in my area for at least five years.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200705/1
>>> Been using Sil-Glyde for twenty years. Never a problem. I still have
>>> all eitght original pin boots on my brakes and they do not even show
>[quoted text clipped - 7 lines]
>> lube, there's some stuff by bendix that's supposed to be good and dow
>> corning's molykote m77 is i understand oem lube for the sliders.
>
>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I don't
>know what you were using, but it sure wasn't Sil-Glyde.
>
Do they even make Sil-Glyde anymore? I used to use it regularly and then I
noticed that I could no longer find it in the stores anymore. I looked around
online and I'm prettty sure I read that it had been taken of the market. Am I
mistaken? I haven't seen it in the stores in my area for at least five years.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200705/1
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
>>> Been using Sil-Glyde for twenty years. Never a problem. I still have
>>> all eitght original pin boots on my brakes and they do not even show
>[quoted text clipped - 7 lines]
>> lube, there's some stuff by bendix that's supposed to be good and dow
>> corning's molykote m77 is i understand oem lube for the sliders.
>
>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I don't
>know what you were using, but it sure wasn't Sil-Glyde.
>
Do they even make Sil-Glyde anymore? I used to use it regularly and then I
noticed that I could no longer find it in the stores anymore. I looked around
online and I'm prettty sure I read that it had been taken of the market. Am I
mistaken? I haven't seen it in the stores in my area for at least five years.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200705/1
>>> Been using Sil-Glyde for twenty years. Never a problem. I still have
>>> all eitght original pin boots on my brakes and they do not even show
>[quoted text clipped - 7 lines]
>> lube, there's some stuff by bendix that's supposed to be good and dow
>> corning's molykote m77 is i understand oem lube for the sliders.
>
>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I don't
>know what you were using, but it sure wasn't Sil-Glyde.
>
Do they even make Sil-Glyde anymore? I used to use it regularly and then I
noticed that I could no longer find it in the stores anymore. I looked around
online and I'm prettty sure I read that it had been taken of the market. Am I
mistaken? I haven't seen it in the stores in my area for at least five years.
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200705/1
Guest
Posts: n/a
Re: Caliper sliding pin boots
"Headknocker via CarKB.com" <u18602@uwe> wrote in
news:72052be93b778@uwe:
> Tegger wrote:
>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>> have all eitght original pin boots on my brakes and they do not
>>>> even show
>>[quoted text clipped - 7 lines]
>>> lube, there's some stuff by bendix that's supposed to be good and
>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>
>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>
>
>
> Do they even make Sil-Glyde anymore? I used to use it regularly and
> then I noticed that I could no longer find it in the stores anymore. I
> looked around online and I'm prettty sure I read that it had been
> taken of the market. Am I mistaken? I haven't seen it in the stores in
> my area for at least five years.
>
It's still made and sold. Readily available at NAPA and other places.
<http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:72052be93b778@uwe:
> Tegger wrote:
>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>> have all eitght original pin boots on my brakes and they do not
>>>> even show
>>[quoted text clipped - 7 lines]
>>> lube, there's some stuff by bendix that's supposed to be good and
>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>
>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>
>
>
> Do they even make Sil-Glyde anymore? I used to use it regularly and
> then I noticed that I could no longer find it in the stores anymore. I
> looked around online and I'm prettty sure I read that it had been
> taken of the market. Am I mistaken? I haven't seen it in the stores in
> my area for at least five years.
>
It's still made and sold. Readily available at NAPA and other places.
<http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
"Headknocker via CarKB.com" <u18602@uwe> wrote in
news:72052be93b778@uwe:
> Tegger wrote:
>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>> have all eitght original pin boots on my brakes and they do not
>>>> even show
>>[quoted text clipped - 7 lines]
>>> lube, there's some stuff by bendix that's supposed to be good and
>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>
>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>
>
>
> Do they even make Sil-Glyde anymore? I used to use it regularly and
> then I noticed that I could no longer find it in the stores anymore. I
> looked around online and I'm prettty sure I read that it had been
> taken of the market. Am I mistaken? I haven't seen it in the stores in
> my area for at least five years.
>
It's still made and sold. Readily available at NAPA and other places.
<http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:72052be93b778@uwe:
> Tegger wrote:
>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>> have all eitght original pin boots on my brakes and they do not
>>>> even show
>>[quoted text clipped - 7 lines]
>>> lube, there's some stuff by bendix that's supposed to be good and
>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>
>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>
>
>
> Do they even make Sil-Glyde anymore? I used to use it regularly and
> then I noticed that I could no longer find it in the stores anymore. I
> looked around online and I'm prettty sure I read that it had been
> taken of the market. Am I mistaken? I haven't seen it in the stores in
> my area for at least five years.
>
It's still made and sold. Readily available at NAPA and other places.
<http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
207.14.116.130:
> "Headknocker via CarKB.com" <u18602@uwe> wrote in
> news:72052be93b778@uwe:
>
>> Tegger wrote:
>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>> have all eitght original pin boots on my brakes and they do not
>>>>> even show
>>>[quoted text clipped - 7 lines]
>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>
>>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>>
>>
>>
>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>> then I noticed that I could no longer find it in the stores anymore. I
>> looked around online and I'm prettty sure I read that it had been
>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>> my area for at least five years.
>>
>
>
> It's still made and sold. Readily available at NAPA and other places.
>
> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>
To jim beam: If you decide to check out that link, you'll see a link to the
MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
mean nothing to me.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
207.14.116.130:
> "Headknocker via CarKB.com" <u18602@uwe> wrote in
> news:72052be93b778@uwe:
>
>> Tegger wrote:
>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>> have all eitght original pin boots on my brakes and they do not
>>>>> even show
>>>[quoted text clipped - 7 lines]
>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>
>>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>>
>>
>>
>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>> then I noticed that I could no longer find it in the stores anymore. I
>> looked around online and I'm prettty sure I read that it had been
>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>> my area for at least five years.
>>
>
>
> It's still made and sold. Readily available at NAPA and other places.
>
> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>
To jim beam: If you decide to check out that link, you'll see a link to the
MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
mean nothing to me.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
207.14.116.130:
> "Headknocker via CarKB.com" <u18602@uwe> wrote in
> news:72052be93b778@uwe:
>
>> Tegger wrote:
>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>> have all eitght original pin boots on my brakes and they do not
>>>>> even show
>>>[quoted text clipped - 7 lines]
>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>
>>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>>
>>
>>
>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>> then I noticed that I could no longer find it in the stores anymore. I
>> looked around online and I'm prettty sure I read that it had been
>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>> my area for at least five years.
>>
>
>
> It's still made and sold. Readily available at NAPA and other places.
>
> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>
To jim beam: If you decide to check out that link, you'll see a link to the
MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
mean nothing to me.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
207.14.116.130:
> "Headknocker via CarKB.com" <u18602@uwe> wrote in
> news:72052be93b778@uwe:
>
>> Tegger wrote:
>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>> have all eitght original pin boots on my brakes and they do not
>>>>> even show
>>>[quoted text clipped - 7 lines]
>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>
>>>Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>don't know what you were using, but it sure wasn't Sil-Glyde.
>>>
>>
>>
>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>> then I noticed that I could no longer find it in the stores anymore. I
>> looked around online and I'm prettty sure I read that it had been
>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>> my area for at least five years.
>>
>
>
> It's still made and sold. Readily available at NAPA and other places.
>
> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>
To jim beam: If you decide to check out that link, you'll see a link to the
MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
mean nothing to me.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
> Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
> 207.14.116.130:
>
>> "Headknocker via CarKB.com" <u18602@uwe> wrote in
>> news:72052be93b778@uwe:
>>
>>> Tegger wrote:
>>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>>> have all eitght original pin boots on my brakes and they do not
>>>>>> even show
>>>> [quoted text clipped - 7 lines]
>>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>> Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>> don't know what you were using, but it sure wasn't Sil-Glyde.
>>>>
>>>
>>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>>> then I noticed that I could no longer find it in the stores anymore. I
>>> looked around online and I'm prettty sure I read that it had been
>>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>>> my area for at least five years.
>>>
>>
>> It's still made and sold. Readily available at NAPA and other places.
>>
>> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>>
>
>
> To jim beam: If you decide to check out that link, you'll see a link to the
> MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
> mean nothing to me.
>
not much! the polyproplyene glycol is a thickening agent - used in
toothpaste among other things. the methylated silica is a bulking agent
the p.g. can bind to. not much room for dimethylpolysiloxane [the
silicone] after that!
> Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
> 207.14.116.130:
>
>> "Headknocker via CarKB.com" <u18602@uwe> wrote in
>> news:72052be93b778@uwe:
>>
>>> Tegger wrote:
>>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>>> have all eitght original pin boots on my brakes and they do not
>>>>>> even show
>>>> [quoted text clipped - 7 lines]
>>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>> Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>> don't know what you were using, but it sure wasn't Sil-Glyde.
>>>>
>>>
>>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>>> then I noticed that I could no longer find it in the stores anymore. I
>>> looked around online and I'm prettty sure I read that it had been
>>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>>> my area for at least five years.
>>>
>>
>> It's still made and sold. Readily available at NAPA and other places.
>>
>> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>>
>
>
> To jim beam: If you decide to check out that link, you'll see a link to the
> MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
> mean nothing to me.
>
not much! the polyproplyene glycol is a thickening agent - used in
toothpaste among other things. the methylated silica is a bulking agent
the p.g. can bind to. not much room for dimethylpolysiloxane [the
silicone] after that!
Guest
Posts: n/a
Re: Caliper sliding pin boots
Tegger wrote:
> Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
> 207.14.116.130:
>
>> "Headknocker via CarKB.com" <u18602@uwe> wrote in
>> news:72052be93b778@uwe:
>>
>>> Tegger wrote:
>>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>>> have all eitght original pin boots on my brakes and they do not
>>>>>> even show
>>>> [quoted text clipped - 7 lines]
>>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>> Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>> don't know what you were using, but it sure wasn't Sil-Glyde.
>>>>
>>>
>>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>>> then I noticed that I could no longer find it in the stores anymore. I
>>> looked around online and I'm prettty sure I read that it had been
>>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>>> my area for at least five years.
>>>
>>
>> It's still made and sold. Readily available at NAPA and other places.
>>
>> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>>
>
>
> To jim beam: If you decide to check out that link, you'll see a link to the
> MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
> mean nothing to me.
>
not much! the polyproplyene glycol is a thickening agent - used in
toothpaste among other things. the methylated silica is a bulking agent
the p.g. can bind to. not much room for dimethylpolysiloxane [the
silicone] after that!
> Tegger <tegger@tegger.c0m> wrote in news:Xns992DB244BF9CCtegger@
> 207.14.116.130:
>
>> "Headknocker via CarKB.com" <u18602@uwe> wrote in
>> news:72052be93b778@uwe:
>>
>>> Tegger wrote:
>>>>>> Been using Sil-Glyde for twenty years. Never a problem. I still
>>>>>> have all eitght original pin boots on my brakes and they do not
>>>>>> even show
>>>> [quoted text clipped - 7 lines]
>>>>> lube, there's some stuff by bendix that's supposed to be good and
>>>>> dow corning's molykote m77 is i understand oem lube for the sliders.
>>>> Sil-Glyde does NOT "gum up" ANY rubber boots on ANY Honda EVER. I
>>>> don't know what you were using, but it sure wasn't Sil-Glyde.
>>>>
>>>
>>> Do they even make Sil-Glyde anymore? I used to use it regularly and
>>> then I noticed that I could no longer find it in the stores anymore. I
>>> looked around online and I'm prettty sure I read that it had been
>>> taken of the market. Am I mistaken? I haven't seen it in the stores in
>>> my area for at least five years.
>>>
>>
>> It's still made and sold. Readily available at NAPA and other places.
>>
>> <http://www.agscompany.com/products/index.php?catId=53&viewProducts=true>
>>
>
>
> To jim beam: If you decide to check out that link, you'll see a link to the
> MSDS at the bottom. Do you see any silicone in the MSDS? The chemical names
> mean nothing to me.
>
not much! the polyproplyene glycol is a thickening agent - used in
toothpaste among other things. the methylated silica is a bulking agent
the p.g. can bind to. not much room for dimethylpolysiloxane [the
silicone] after that!
Guest
Posts: n/a
Re: Caliper sliding pin boots
jim beam <spamvortex@bad.example.net> wrote in
news:xL-dndPgSuZqsNjbnZ2dnUVZ_v2knZ2d@speakeasy.net:
> Tegger wrote:
>>
>> To jim beam: If you decide to check out that link, you'll see a link
>> to the MSDS at the bottom. Do you see any silicone in the MSDS? The
>> chemical names mean nothing to me.
>>
> not much! the polyproplyene glycol is a thickening agent - used in
> toothpaste among other things. the methylated silica is a bulking
> agent the p.g. can bind to. not much room for dimethylpolysiloxane
> [the silicone] after that!
So then "Sil-Glyde" is more "Glyde" than "Sil". Interesting to know, but
not ultimately of effect on my purchase and use decisions. The stuff is
still excellent. But there was once better....
In my neck of the woods twenty-five years ago there used to be a substance
called "Impac 1000".
It was an extremely effective potion. Unfortunately, efficacy does not
automatically conflate with business success, and Impac 1000 went out of
business. I was therefore forced to fall back on Sil-Glyde.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:xL-dndPgSuZqsNjbnZ2dnUVZ_v2knZ2d@speakeasy.net:
> Tegger wrote:
>>
>> To jim beam: If you decide to check out that link, you'll see a link
>> to the MSDS at the bottom. Do you see any silicone in the MSDS? The
>> chemical names mean nothing to me.
>>
> not much! the polyproplyene glycol is a thickening agent - used in
> toothpaste among other things. the methylated silica is a bulking
> agent the p.g. can bind to. not much room for dimethylpolysiloxane
> [the silicone] after that!
So then "Sil-Glyde" is more "Glyde" than "Sil". Interesting to know, but
not ultimately of effect on my purchase and use decisions. The stuff is
still excellent. But there was once better....
In my neck of the woods twenty-five years ago there used to be a substance
called "Impac 1000".
It was an extremely effective potion. Unfortunately, efficacy does not
automatically conflate with business success, and Impac 1000 went out of
business. I was therefore forced to fall back on Sil-Glyde.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Guest
Posts: n/a
Re: Caliper sliding pin boots
jim beam <spamvortex@bad.example.net> wrote in
news:xL-dndPgSuZqsNjbnZ2dnUVZ_v2knZ2d@speakeasy.net:
> Tegger wrote:
>>
>> To jim beam: If you decide to check out that link, you'll see a link
>> to the MSDS at the bottom. Do you see any silicone in the MSDS? The
>> chemical names mean nothing to me.
>>
> not much! the polyproplyene glycol is a thickening agent - used in
> toothpaste among other things. the methylated silica is a bulking
> agent the p.g. can bind to. not much room for dimethylpolysiloxane
> [the silicone] after that!
So then "Sil-Glyde" is more "Glyde" than "Sil". Interesting to know, but
not ultimately of effect on my purchase and use decisions. The stuff is
still excellent. But there was once better....
In my neck of the woods twenty-five years ago there used to be a substance
called "Impac 1000".
It was an extremely effective potion. Unfortunately, efficacy does not
automatically conflate with business success, and Impac 1000 went out of
business. I was therefore forced to fall back on Sil-Glyde.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:xL-dndPgSuZqsNjbnZ2dnUVZ_v2knZ2d@speakeasy.net:
> Tegger wrote:
>>
>> To jim beam: If you decide to check out that link, you'll see a link
>> to the MSDS at the bottom. Do you see any silicone in the MSDS? The
>> chemical names mean nothing to me.
>>
> not much! the polyproplyene glycol is a thickening agent - used in
> toothpaste among other things. the methylated silica is a bulking
> agent the p.g. can bind to. not much room for dimethylpolysiloxane
> [the silicone] after that!
So then "Sil-Glyde" is more "Glyde" than "Sil". Interesting to know, but
not ultimately of effect on my purchase and use decisions. The stuff is
still excellent. But there was once better....
In my neck of the woods twenty-five years ago there used to be a substance
called "Impac 1000".
It was an extremely effective potion. Unfortunately, efficacy does not
automatically conflate with business success, and Impac 1000 went out of
business. I was therefore forced to fall back on Sil-Glyde.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
j_qwik81
Miscellaneous Stuff For Sale
7
Apr 15, 2007 01:07 PM
remcow
Honda Mailing List
10
Nov 21, 2004 10:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
