CD Changer pin config
01-15-2005, 08:59 PM
#1
Guest
Posts: n/a
CD Changer pin config
I am looking for a pin configuration for a 2002 CIVIC EX bus cable
(rectangular connector) to a 1997 6 disk CD changer (round connector).
Anyone know where I might find the information? I think that I saw
a couple of them pre-made, but wanted to save a few $$$....
Please respond to the group
Thanks,
Jonathan
01-15-2005, 09:48 PM
#2
Guest
Posts: n/a
Re: CD Changer pin config
jonnono@hawaii.no.spam.edu wrote:
To further clarify, I am seeking to make a connector between
the two so that I might use the cd changer in the vehicle.
That is if the two are even compatiable. It seems so from
some of the information out on the net. Other ideas or
suggestions?
: I am looking for a pin configuration for a 2002 CIVIC EX bus cable
: (rectangular connector) to a 1997 6 disk CD changer (round connector).
: Anyone know where I might find the information? I think that I saw
: a couple of them pre-made, but wanted to save a few $$$....
: Please respond to the group
: Thanks,
: Jonathan
To further clarify, I am seeking to make a connector between
the two so that I might use the cd changer in the vehicle.
That is if the two are even compatiable. It seems so from
some of the information out on the net. Other ideas or
suggestions?
: I am looking for a pin configuration for a 2002 CIVIC EX bus cable
: (rectangular connector) to a 1997 6 disk CD changer (round connector).
: Anyone know where I might find the information? I think that I saw
: a couple of them pre-made, but wanted to save a few $$$....
: Please respond to the group
: Thanks,
: Jonathan
01-15-2005, 09:48 PM
#3
Guest
Posts: n/a
Re: CD Changer pin config
jonnono@hawaii.no.spam.edu wrote:
To further clarify, I am seeking to make a connector between
the two so that I might use the cd changer in the vehicle.
That is if the two are even compatiable. It seems so from
some of the information out on the net. Other ideas or
suggestions?
: I am looking for a pin configuration for a 2002 CIVIC EX bus cable
: (rectangular connector) to a 1997 6 disk CD changer (round connector).
: Anyone know where I might find the information? I think that I saw
: a couple of them pre-made, but wanted to save a few $$$....
: Please respond to the group
: Thanks,
: Jonathan
To further clarify, I am seeking to make a connector between
the two so that I might use the cd changer in the vehicle.
That is if the two are even compatiable. It seems so from
some of the information out on the net. Other ideas or
suggestions?
: I am looking for a pin configuration for a 2002 CIVIC EX bus cable
: (rectangular connector) to a 1997 6 disk CD changer (round connector).
: Anyone know where I might find the information? I think that I saw
: a couple of them pre-made, but wanted to save a few $$$....
: Please respond to the group
: Thanks,
: Jonathan
01-17-2005, 08:23 PM
#4
Guest
Posts: n/a
Re: CD Changer pin config
Not gonna work....
Different protocols
<jonnono@hawaii.no.spam.edu> wrote in message
news:csckm2$dvg$1@news.hawaii.edu...
> jonnono@hawaii.no.spam.edu wrote:
>
> To further clarify, I am seeking to make a connector between
> the two so that I might use the cd changer in the vehicle.
>
> That is if the two are even compatiable. It seems so from
> some of the information out on the net. Other ideas or
> suggestions?
>
> : I am looking for a pin configuration for a 2002 CIVIC EX bus cable
> : (rectangular connector) to a 1997 6 disk CD changer (round connector).
>
> : Anyone know where I might find the information? I think that I saw
> : a couple of them pre-made, but wanted to save a few $$$....
>
> : Please respond to the group
>
> : Thanks,
>
> : Jonathan
>
Different protocols
<jonnono@hawaii.no.spam.edu> wrote in message
news:csckm2$dvg$1@news.hawaii.edu...
> jonnono@hawaii.no.spam.edu wrote:
>
> To further clarify, I am seeking to make a connector between
> the two so that I might use the cd changer in the vehicle.
>
> That is if the two are even compatiable. It seems so from
> some of the information out on the net. Other ideas or
> suggestions?
>
> : I am looking for a pin configuration for a 2002 CIVIC EX bus cable
> : (rectangular connector) to a 1997 6 disk CD changer (round connector).
>
> : Anyone know where I might find the information? I think that I saw
> : a couple of them pre-made, but wanted to save a few $$$....
>
> : Please respond to the group
>
> : Thanks,
>
> : Jonathan
>
01-17-2005, 08:23 PM
#5
Guest
Posts: n/a
Re: CD Changer pin config
Not gonna work....
Different protocols
<jonnono@hawaii.no.spam.edu> wrote in message
news:csckm2$dvg$1@news.hawaii.edu...
> jonnono@hawaii.no.spam.edu wrote:
>
> To further clarify, I am seeking to make a connector between
> the two so that I might use the cd changer in the vehicle.
>
> That is if the two are even compatiable. It seems so from
> some of the information out on the net. Other ideas or
> suggestions?
>
> : I am looking for a pin configuration for a 2002 CIVIC EX bus cable
> : (rectangular connector) to a 1997 6 disk CD changer (round connector).
>
> : Anyone know where I might find the information? I think that I saw
> : a couple of them pre-made, but wanted to save a few $$$....
>
> : Please respond to the group
>
> : Thanks,
>
> : Jonathan
>
Different protocols
<jonnono@hawaii.no.spam.edu> wrote in message
news:csckm2$dvg$1@news.hawaii.edu...
> jonnono@hawaii.no.spam.edu wrote:
>
> To further clarify, I am seeking to make a connector between
> the two so that I might use the cd changer in the vehicle.
>
> That is if the two are even compatiable. It seems so from
> some of the information out on the net. Other ideas or
> suggestions?
>
> : I am looking for a pin configuration for a 2002 CIVIC EX bus cable
> : (rectangular connector) to a 1997 6 disk CD changer (round connector).
>
> : Anyone know where I might find the information? I think that I saw
> : a couple of them pre-made, but wanted to save a few $$$....
>
> : Please respond to the group
>
> : Thanks,
>
> : Jonathan
>
Thread
Thread Starter
Forum
Replies
Last Post
soxfan
Hyundai Mailing List
0
06-23-2003 11:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
