CHECK ENGINE light (Oxygen censor)
12-08-2003, 06:25 PM
#16
Guest
Posts: n/a
Re: CHECK ENGINE light (Oxygen censor)
Wrong. Bosch sells O2 sensors with the OEM connector, no need to splice it.
"JR Lomas" <jrl@engineer.nu> wrote in message
news:KNOdnYbVF-QSIEmiRVn-hg@comcast.com...
> An OEM sensor with the connector WILL cost $220.
> However, if you are willing to do some splicing, you
> can use the OLD oxygen sensor connector and splice
> it into the new oxygen sensor for ~$80. A bad oxygen
> sensor WILL also cause stumbling, as it becomes too
> "lazy" to adjust the correct air/fuel mixture in time and
> your cylinders end up with too much air and too little
> fuel.
>
> - JR
>
>
"JR Lomas" <jrl@engineer.nu> wrote in message
news:KNOdnYbVF-QSIEmiRVn-hg@comcast.com...
> An OEM sensor with the connector WILL cost $220.
> However, if you are willing to do some splicing, you
> can use the OLD oxygen sensor connector and splice
> it into the new oxygen sensor for ~$80. A bad oxygen
> sensor WILL also cause stumbling, as it becomes too
> "lazy" to adjust the correct air/fuel mixture in time and
> your cylinders end up with too much air and too little
> fuel.
>
> - JR
>
>
12-08-2003, 06:25 PM
#17
Guest
Posts: n/a
Re: CHECK ENGINE light (Oxygen censor)
Wrong. Bosch sells O2 sensors with the OEM connector, no need to splice it.
"JR Lomas" <jrl@engineer.nu> wrote in message
news:KNOdnYbVF-QSIEmiRVn-hg@comcast.com...
> An OEM sensor with the connector WILL cost $220.
> However, if you are willing to do some splicing, you
> can use the OLD oxygen sensor connector and splice
> it into the new oxygen sensor for ~$80. A bad oxygen
> sensor WILL also cause stumbling, as it becomes too
> "lazy" to adjust the correct air/fuel mixture in time and
> your cylinders end up with too much air and too little
> fuel.
>
> - JR
>
>
"JR Lomas" <jrl@engineer.nu> wrote in message
news:KNOdnYbVF-QSIEmiRVn-hg@comcast.com...
> An OEM sensor with the connector WILL cost $220.
> However, if you are willing to do some splicing, you
> can use the OLD oxygen sensor connector and splice
> it into the new oxygen sensor for ~$80. A bad oxygen
> sensor WILL also cause stumbling, as it becomes too
> "lazy" to adjust the correct air/fuel mixture in time and
> your cylinders end up with too much air and too little
> fuel.
>
> - JR
>
>
Thread
Thread Starter
Forum
Replies
Last Post
GTCz-Roger
Computer / Technology Chat
0
01-27-2012 12:50 PM
Paul
Hyundai Mailing List
0
06-25-2008 05:34 PM
Strorg
Honda Mailing List
12
10-26-2003 09:18 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)