Cold Air Intake reducer
 

I need a black or green cold air intake reducer, approx 2 1/2 to 2". I have
checked the local harware stores as suggested for a rubber one, but standard
PVC does not com ein the size I need.

Any suggestions??

1992 Honda Prelude with the 2.2 motor

Eightupman

Re: Cold Air Intake reducer
 

"Eightupman" <eightupman@newemail.com> wrote in message
news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
>I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
>have
> checked the local harware stores as suggested for a rubber one, but
> standard
> PVC does not com ein the size I need.
>
> Any suggestions??
>
> 1992 Honda Prelude with the 2.2 motor
>
> Eightupman


Plumbing supply house.
Something like this, right?
http://www.wellspent.org/Category?c=9148

Or you local tuner shop, for these
http://www.diamondstarmotorsport.com/diyparts.shtml

Re: Cold Air Intake reducer
 

"Eightupman" <eightupman@newemail.com> wrote in message
news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
>I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
>have
> checked the local harware stores as suggested for a rubber one, but
> standard
> PVC does not com ein the size I need.
>
> Any suggestions??
>
> 1992 Honda Prelude with the 2.2 motor
>
> Eightupman


Plumbing supply house.
Something like this, right?
http://www.wellspent.org/Category?c=9148

Or you local tuner shop, for these
http://www.diamondstarmotorsport.com/diyparts.shtml

Re: Cold Air Intake reducer
 

Yes. As I mentioned, I went to the local plumbing supply houses, and the
standard pipe sizes that they carry do not fit.

The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.

However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.

Thanks

Eightupman


"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
news:DNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>

Re: Cold Air Intake reducer
 

Yes. As I mentioned, I went to the local plumbing supply houses, and the
standard pipe sizes that they carry do not fit.

The second website carries EXACTLY what I am looking for size wise, but not
the green that I really really need. Thank you.

However, I got experimental, and had a can of Duplicolor black interior
vinyl dye, and shot the yellow reducer that I have.
To my surprise, it worked extremely well, and does not even show yellow when
flexed. The only test now is how it would react to the heat of the engine
compartment.

Thanks

Eightupman


"Steve Bigelow" <stevebigelowXXX@rogers.com> wrote in message
news:DNOdneNYA-OpXgLcRVn-qQ@rogers.com...
>
> "Eightupman" <eightupman@newemail.com> wrote in message
> news:PtOnd.17930$DE1.774774@twister.southeast.rr.c om...
> >I need a black or green cold air intake reducer, approx 2 1/2 to 2". I
> >have
> > checked the local harware stores as suggested for a rubber one, but
> > standard
> > PVC does not com ein the size I need.
> >
> > Any suggestions??
> >
> > 1992 Honda Prelude with the 2.2 motor
> >
> > Eightupman
>
>
> Plumbing supply house.
> Something like this, right?
> http://www.wellspent.org/Category?c=9148
>
> Or you local tuner shop, for these
> http://www.diamondstarmotorsport.com/diyparts.shtml
>
>