Engine Bay Cleaning
10-12-2009, 12:35 PM
#1
Guest
Posts: n/a
Engine Bay Cleaning
I want to clean the engine bay of my 2005 Civic. I purchased Autoglym
Engine & Machine Cleaner but was concerned when I read the
instructions it said to hose with plenty of water to rinse off. My
main concerns were water ingress into air vents and electrical
components. Can someone please advise which areas I need to cover with
cling film. I've attached a photo of my engine bay. Maybe someone
could be kind enough to mark the regions with red circles in
Photoshop.
Many thanks for your help!
http://img63.imageshack.us/img63/6691/12102009024.jpg
Engine & Machine Cleaner but was concerned when I read the
instructions it said to hose with plenty of water to rinse off. My
main concerns were water ingress into air vents and electrical
components. Can someone please advise which areas I need to cover with
cling film. I've attached a photo of my engine bay. Maybe someone
could be kind enough to mark the regions with red circles in
Photoshop.
Many thanks for your help!
http://img63.imageshack.us/img63/6691/12102009024.jpg
10-13-2009, 07:11 AM
#2
Guest
Posts: n/a
Re: Engine Bay Cleaning
On Mon, 12 Oct 2009 09:35:22 -0700 (PDT), Distorted Vision
<r.patre@gmail.com> wrote:
>I want to clean the engine bay of my 2005 Civic. I purchased Autoglym
>Engine & Machine Cleaner but was concerned when I read the
>instructions it said to hose with plenty of water to rinse off. My
>main concerns were water ingress into air vents and electrical
>components. Can someone please advise which areas I need to cover with
>cling film. I've attached a photo of my engine bay. Maybe someone
>could be kind enough to mark the regions with red circles in
>Photoshop.
>
>Many thanks for your help!
>
>http://img63.imageshack.us/img63/6691/12102009024.jpg
I would just leave it alone if it were me.
<r.patre@gmail.com> wrote:
>I want to clean the engine bay of my 2005 Civic. I purchased Autoglym
>Engine & Machine Cleaner but was concerned when I read the
>instructions it said to hose with plenty of water to rinse off. My
>main concerns were water ingress into air vents and electrical
>components. Can someone please advise which areas I need to cover with
>cling film. I've attached a photo of my engine bay. Maybe someone
>could be kind enough to mark the regions with red circles in
>Photoshop.
>
>Many thanks for your help!
>
>http://img63.imageshack.us/img63/6691/12102009024.jpg
I would just leave it alone if it were me.
10-13-2009, 12:50 PM
#3
Guest
Posts: n/a
Re: Engine Bay Cleaning
I went ahead and did it. I covered all the water sensitive components
with cling film and aluminium foil. I sprayed the entire engine bay
with Autoglym Engine & Machine Cleaner and wiped over with several
wrung out damp cloths and a bucket of hot water. I then sprayed the
bay again with Autoglym Rubber & Vinyl care. It started perfectly the
first time as normal.
Here are the results:
http://img129.imageshack.us/gal.php?g=12102009024.jpg
with cling film and aluminium foil. I sprayed the entire engine bay
with Autoglym Engine & Machine Cleaner and wiped over with several
wrung out damp cloths and a bucket of hot water. I then sprayed the
bay again with Autoglym Rubber & Vinyl care. It started perfectly the
first time as normal.
Here are the results:
http://img129.imageshack.us/gal.php?g=12102009024.jpg
10-13-2009, 12:57 PM
#4
Guest
Posts: n/a
Re: Engine Bay Cleaning
On Tue, 13 Oct 2009 09:50:57 -0700 (PDT), Distorted Vision
<r.patre@gmail.com> wrote:
>I went ahead and did it. I covered all the water sensitive components
>with cling film and aluminium foil. I sprayed the entire engine bay
>with Autoglym Engine & Machine Cleaner and wiped over with several
>wrung out damp cloths and a bucket of hot water. I then sprayed the
>bay again with Autoglym Rubber & Vinyl care. It started perfectly the
>first time as normal.
>
>Here are the results:
>
>http://img129.imageshack.us/gal.php?g=12102009024.jpg
Amazing transformation.
<r.patre@gmail.com> wrote:
>I went ahead and did it. I covered all the water sensitive components
>with cling film and aluminium foil. I sprayed the entire engine bay
>with Autoglym Engine & Machine Cleaner and wiped over with several
>wrung out damp cloths and a bucket of hot water. I then sprayed the
>bay again with Autoglym Rubber & Vinyl care. It started perfectly the
>first time as normal.
>
>Here are the results:
>
>http://img129.imageshack.us/gal.php?g=12102009024.jpg
Amazing transformation.
10-13-2009, 02:03 PM
#5
Guest
Posts: n/a
Re: Engine Bay Cleaning
"Distorted Vision" <r.patre@gmail.com> wrote in message
news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>I went ahead and did it. I covered all the water sensitive components
> with cling film and aluminium foil. I sprayed the entire engine bay
> with Autoglym Engine & Machine Cleaner and wiped over with several
> wrung out damp cloths and a bucket of hot water. I then sprayed the
> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
> first time as normal.
>
> Here are the results:
>
> http://img129.imageshack.us/gal.php?g=12102009024.jpg
Now if only you could figure out a way to ride around with the hood up to
show off your work...
news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>I went ahead and did it. I covered all the water sensitive components
> with cling film and aluminium foil. I sprayed the entire engine bay
> with Autoglym Engine & Machine Cleaner and wiped over with several
> wrung out damp cloths and a bucket of hot water. I then sprayed the
> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
> first time as normal.
>
> Here are the results:
>
> http://img129.imageshack.us/gal.php?g=12102009024.jpg
Now if only you could figure out a way to ride around with the hood up to
show off your work...
10-13-2009, 02:17 PM
#6
Guest
Posts: n/a
Re: Engine Bay Cleaning
On Tue, 13 Oct 2009 14:03:39 -0400, "John H. Holliday" <doc@ok.org>
wrote:
>"Distorted Vision" <r.patre@gmail.com> wrote in message
>news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>>I went ahead and did it. I covered all the water sensitive components
>> with cling film and aluminium foil. I sprayed the entire engine bay
>> with Autoglym Engine & Machine Cleaner and wiped over with several
>> wrung out damp cloths and a bucket of hot water. I then sprayed the
>> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
>> first time as normal.
>>
>> Here are the results:
>>
>> http://img129.imageshack.us/gal.php?g=12102009024.jpg
>
>
>Now if only you could figure out a way to ride around with the hood up to
>show off your work...
>
Good one.
wrote:
>"Distorted Vision" <r.patre@gmail.com> wrote in message
>news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>>I went ahead and did it. I covered all the water sensitive components
>> with cling film and aluminium foil. I sprayed the entire engine bay
>> with Autoglym Engine & Machine Cleaner and wiped over with several
>> wrung out damp cloths and a bucket of hot water. I then sprayed the
>> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
>> first time as normal.
>>
>> Here are the results:
>>
>> http://img129.imageshack.us/gal.php?g=12102009024.jpg
>
>
>Now if only you could figure out a way to ride around with the hood up to
>show off your work...
>
Good one.
10-13-2009, 08:11 PM
#7
Guest
Posts: n/a
Re: Engine Bay Cleaning
"John H. Holliday" <doc@ok.org> wrote in message
news:hb2fdq$q3v$1@news.albasani.net...
> "Distorted Vision" <r.patre@gmail.com> wrote in message
> news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>>I went ahead and did it. I covered all the water sensitive components
>> with cling film and aluminium foil. I sprayed the entire engine bay
>> with Autoglym Engine & Machine Cleaner and wiped over with several
>> wrung out damp cloths and a bucket of hot water. I then sprayed the
>> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
>> first time as normal.
>>
>> Here are the results:
>>
>> http://img129.imageshack.us/gal.php?g=12102009024.jpg
>
>
> Now if only you could figure out a way to ride around with the hood up to
> show off your work...
Easy -- commission an aftermarket clear plastic hood. Heck, there may be
something like that already.
>
10-13-2009, 08:13 PM
#8
Guest
Posts: n/a
Re: Engine Bay Cleaning
"Distorted Vision" <r.patre@gmail.com> wrote in message
news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>I went ahead and did it. I covered all the water sensitive components
> with cling film and aluminium foil. I sprayed the entire engine bay
> with Autoglym Engine & Machine Cleaner and wiped over with several
> wrung out damp cloths and a bucket of hot water. I then sprayed the
> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
> first time as normal.
>
> Here are the results:
>
> http://img129.imageshack.us/gal.php?g=12102009024.jpg
Nice!
10-13-2009, 10:18 PM
#9
Guest
Posts: n/a
Re: Engine Bay Cleaning
"Distorted Vision" <r.patre@gmail.com> wrote in message
news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>I went ahead and did it. I covered all the water sensitive components
> with cling film and aluminium foil. I sprayed the entire engine bay
> with Autoglym Engine & Machine Cleaner and wiped over with several
> wrung out damp cloths and a bucket of hot water. I then sprayed the
> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
> first time as normal.
>
> Here are the results:
>
> http://img129.imageshack.us/gal.php?g=12102009024.jpg
Whoa! Can you still start up and run that beautiful engine?
news:02d3f8cb-c5a7-4c11-a405-7e4357ad7dd7@v25g2000yqk.googlegroups.com...
>I went ahead and did it. I covered all the water sensitive components
> with cling film and aluminium foil. I sprayed the entire engine bay
> with Autoglym Engine & Machine Cleaner and wiped over with several
> wrung out damp cloths and a bucket of hot water. I then sprayed the
> bay again with Autoglym Rubber & Vinyl care. It started perfectly the
> first time as normal.
>
> Here are the results:
>
> http://img129.imageshack.us/gal.php?g=12102009024.jpg
Whoa! Can you still start up and run that beautiful engine?
10-14-2009, 03:46 AM
#10
Guest
Posts: n/a
Re: Engine Bay Cleaning
Yes of course - it started perfectly as normal the first time. I
covered all water sensitive & electrical components with cling film
and aluminium foil. I wiped over all the surfaces with a damp cloth
rather than hosing to rinse.
covered all water sensitive & electrical components with cling film
and aluminium foil. I wiped over all the surfaces with a damp cloth
rather than hosing to rinse.
10-14-2009, 10:15 PM
#11
Guest
Posts: n/a
Re: Engine Bay Cleaning
"Distorted Vision" <r.patre@gmail.com> wrote in message
news:978c8139-0974-4230-9df0-24d6b736449d@e8g2000yqo.googlegroups.com...
> Yes of course - it started perfectly as normal the first time. I
> covered all water sensitive & electrical components with cling film
> and aluminium foil. I wiped over all the surfaces with a damp cloth
> rather than hosing to rinse.
Good for you, but I never heard of cling film before. Where do you get
it?
How much time did the whole job take for you?
news:978c8139-0974-4230-9df0-24d6b736449d@e8g2000yqo.googlegroups.com...
> Yes of course - it started perfectly as normal the first time. I
> covered all water sensitive & electrical components with cling film
> and aluminium foil. I wiped over all the surfaces with a damp cloth
> rather than hosing to rinse.
Good for you, but I never heard of cling film before. Where do you get
it?
How much time did the whole job take for you?
10-16-2009, 03:18 AM
#14
Guest
Posts: n/a
Re: Engine Bay Cleaning
"Distorted Vision" <r.patre@gmail.com> wrote in message
news:080d46c0-4891-439a-a85c-a872d18f8cf5@d10g2000yqh.googlegroups.com...
> Not as long as I thought - about 1.5 hours.
Amazingly fast! Maybe I should hire you out to do the same on my Accord.
news:080d46c0-4891-439a-a85c-a872d18f8cf5@d10g2000yqh.googlegroups.com...
> Not as long as I thought - about 1.5 hours.
Amazingly fast! Maybe I should hire you out to do the same on my Accord.
Thread
Thread Starter
Forum
Replies
Last Post
ames l
honda / acura
0
01-13-2008 07:30 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
