|
Erratic Idle
Took my 98 dx 5spd to the shop today and asked them to check my IAC.
Which I will check myself. There is some crappy air intake on the car and the people at the shop said thats what was causing my up and down idle. Can a crappy air intake cause the same issue as a malfunctioning IACV? |
Re: Erratic Idle
In article <1147744705.680218.102960@j73g2000cwa.googlegroups .com>, "ftdn"
<john.michael.fiallos@gmail.com> wrote: Took my 98 dx 5spd to the shop today and asked them to check my IAC. Which I will check myself. There is some crappy air intake on the car and the people at the shop said thats what was causing my up and down idle. Can a crappy air intake cause the same issue as a malfunctioning IACV? An engine needs air in order to runs. If it does not get the air that it needs,it could effect the way the engine runs. You should remove the crappy air intake and visit a auto shop or junk yard place a air intake system on the car that has a new filter. After you do that--take it back to the shop and have them recheck the IAC. You may want to ask your friends if there are any stores that sell after market air intake systems. visit this site: andysautosport.com |
Re: Erratic Idle
In article <1147744705.680218.102960@j73g2000cwa.googlegroups .com>, "ftdn"
<john.michael.fiallos@gmail.com> wrote: Took my 98 dx 5spd to the shop today and asked them to check my IAC. Which I will check myself. There is some crappy air intake on the car and the people at the shop said thats what was causing my up and down idle. Can a crappy air intake cause the same issue as a malfunctioning IACV? An engine needs air in order to runs. If it does not get the air that it needs,it could effect the way the engine runs. You should remove the crappy air intake and visit a auto shop or junk yard place a air intake system on the car that has a new filter. After you do that--take it back to the shop and have them recheck the IAC. You may want to ask your friends if there are any stores that sell after market air intake systems. visit this site: andysautosport.com |
Re: Erratic Idle
In article <1147744705.680218.102960@j73g2000cwa.googlegroups .com>, "ftdn"
<john.michael.fiallos@gmail.com> wrote: Took my 98 dx 5spd to the shop today and asked them to check my IAC. Which I will check myself. There is some crappy air intake on the car and the people at the shop said thats what was causing my up and down idle. Can a crappy air intake cause the same issue as a malfunctioning IACV? An engine needs air in order to runs. If it does not get the air that it needs,it could effect the way the engine runs. You should remove the crappy air intake and visit a auto shop or junk yard place a air intake system on the car that has a new filter. After you do that--take it back to the shop and have them recheck the IAC. You may want to ask your friends if there are any stores that sell after market air intake systems. visit this site: andysautosport.com |
Re: Erratic Idle
"ftdn" <john.michael.fiallos@gmail.com> wrote in
news:1147744705.680218.102960@j73g2000cwa.googlegr oups.com: > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > > The "crappy intake" can foul the IAC with carbon and grit, so it's unable to adjust the idle properly and you get a great big air leak. A quick test: Warm the engine up to full hot and keep it running. Pull the "crappy intake" so you can see into the throttle body. There ought to be a port visible in the throttle body. Partially cover the port with your finger. Does the idle settle down? Keep covering more of the port until the idle settles down. Does it eventually settle down? If so, the IAC isn't moving correctly. Do you see TWO ports in the throttle body, or just one? If your car has TWO ports, then the lower one leads to a Fast Idle Valve. This should NOT be admitting air when the engine is hot. If it does, the Fast Idle Valve is bad, usually the result of a sludged cooling system. Also check for other sources of air leakage, such as a vacuum line disconnected. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: Erratic Idle
"ftdn" <john.michael.fiallos@gmail.com> wrote in
news:1147744705.680218.102960@j73g2000cwa.googlegr oups.com: > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > > The "crappy intake" can foul the IAC with carbon and grit, so it's unable to adjust the idle properly and you get a great big air leak. A quick test: Warm the engine up to full hot and keep it running. Pull the "crappy intake" so you can see into the throttle body. There ought to be a port visible in the throttle body. Partially cover the port with your finger. Does the idle settle down? Keep covering more of the port until the idle settles down. Does it eventually settle down? If so, the IAC isn't moving correctly. Do you see TWO ports in the throttle body, or just one? If your car has TWO ports, then the lower one leads to a Fast Idle Valve. This should NOT be admitting air when the engine is hot. If it does, the Fast Idle Valve is bad, usually the result of a sludged cooling system. Also check for other sources of air leakage, such as a vacuum line disconnected. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: Erratic Idle
"ftdn" <john.michael.fiallos@gmail.com> wrote in
news:1147744705.680218.102960@j73g2000cwa.googlegr oups.com: > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > > The "crappy intake" can foul the IAC with carbon and grit, so it's unable to adjust the idle properly and you get a great big air leak. A quick test: Warm the engine up to full hot and keep it running. Pull the "crappy intake" so you can see into the throttle body. There ought to be a port visible in the throttle body. Partially cover the port with your finger. Does the idle settle down? Keep covering more of the port until the idle settles down. Does it eventually settle down? If so, the IAC isn't moving correctly. Do you see TWO ports in the throttle body, or just one? If your car has TWO ports, then the lower one leads to a Fast Idle Valve. This should NOT be admitting air when the engine is hot. If it does, the Fast Idle Valve is bad, usually the result of a sludged cooling system. Also check for other sources of air leakage, such as a vacuum line disconnected. -- TeGGeR® The Unofficial Honda/Acura FAQ www.tegger.com/hondafaq/ |
Re: Erratic Idle
Erratic Idle? Isn't that Eric Idle's twin brother?
--- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-0, 05/15/2006 Tested on: 5/15/2006 7:56:36 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Erratic Idle? Isn't that Eric Idle's twin brother?
--- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-0, 05/15/2006 Tested on: 5/15/2006 7:56:36 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Erratic Idle? Isn't that Eric Idle's twin brother?
--- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-0, 05/15/2006 Tested on: 5/15/2006 7:56:36 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
ftdn wrote:
> Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > have you checked the coolant level in the radiator? if it's not full to the top, it can cause idle problems because one of the sensors is not fully immersed. |
Re: Erratic Idle
ftdn wrote:
> Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > have you checked the coolant level in the radiator? if it's not full to the top, it can cause idle problems because one of the sensors is not fully immersed. |
Re: Erratic Idle
ftdn wrote:
> Took my 98 dx 5spd to the shop today and asked them to check my IAC. > Which I will check myself. There is some crappy air intake on the car > and the people at the shop said thats what was causing my up and down > idle. Can a crappy air intake cause the same issue as a malfunctioning > IACV? > have you checked the coolant level in the radiator? if it's not full to the top, it can cause idle problems because one of the sensors is not fully immersed. |
Re: Erratic Idle
jim beam wrote:
> > ftdn wrote: > > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > > Which I will check myself. There is some crappy air intake on the car > > and the people at the shop said thats what was causing my up and down > > idle. Can a crappy air intake cause the same issue as a malfunctioning > > IACV? > > > have you checked the coolant level in the radiator? if it's not full to > the top, it can cause idle problems because one of the sensors is not > fully immersed. ---------------------------------------- Beyond that, the reservior needs to be full too, since trapped air can't escape if there's no coolant in the reservoir to replace it. Honda premix is the foolproof thing to try first. You might have to top it up to MAX twice. 'Curly' |
Re: Erratic Idle
jim beam wrote:
> > ftdn wrote: > > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > > Which I will check myself. There is some crappy air intake on the car > > and the people at the shop said thats what was causing my up and down > > idle. Can a crappy air intake cause the same issue as a malfunctioning > > IACV? > > > have you checked the coolant level in the radiator? if it's not full to > the top, it can cause idle problems because one of the sensors is not > fully immersed. ---------------------------------------- Beyond that, the reservior needs to be full too, since trapped air can't escape if there's no coolant in the reservoir to replace it. Honda premix is the foolproof thing to try first. You might have to top it up to MAX twice. 'Curly' |
Re: Erratic Idle
jim beam wrote:
> > ftdn wrote: > > Took my 98 dx 5spd to the shop today and asked them to check my IAC. > > Which I will check myself. There is some crappy air intake on the car > > and the people at the shop said thats what was causing my up and down > > idle. Can a crappy air intake cause the same issue as a malfunctioning > > IACV? > > > have you checked the coolant level in the radiator? if it's not full to > the top, it can cause idle problems because one of the sensors is not > fully immersed. ---------------------------------------- Beyond that, the reservior needs to be full too, since trapped air can't escape if there's no coolant in the reservoir to replace it. Honda premix is the foolproof thing to try first. You might have to top it up to MAX twice. 'Curly' |
Re: Erratic Idle
>A quick test:
>Warm the engine up to full hot and keep it running. >Pull the "crappy intake" so you can see into the throttle body. >There ought to be a port visible in the throttle body. >Partially cover the port with your finger. Does the idle settle down? >Keep covering more of the port until the idle settles down. >Does it eventually settle down? If so, the IAC isn't moving correctly. it never settles out |
Re: Erratic Idle
>A quick test:
>Warm the engine up to full hot and keep it running. >Pull the "crappy intake" so you can see into the throttle body. >There ought to be a port visible in the throttle body. >Partially cover the port with your finger. Does the idle settle down? >Keep covering more of the port until the idle settles down. >Does it eventually settle down? If so, the IAC isn't moving correctly. it never settles out |
Re: Erratic Idle
>A quick test:
>Warm the engine up to full hot and keep it running. >Pull the "crappy intake" so you can see into the throttle body. >There ought to be a port visible in the throttle body. >Partially cover the port with your finger. Does the idle settle down? >Keep covering more of the port until the idle settles down. >Does it eventually settle down? If so, the IAC isn't moving correctly. it never settles out |
Re: Erratic Idle
OK! I found out something today. The erratic Idle stops when the AC is
turned on! The AC has to be turned on though, It can't just be the blower/fan. The AC also makes a whistling sound. Any idea why it idles normally when the AC is turned on? |
Re: Erratic Idle
OK! I found out something today. The erratic Idle stops when the AC is
turned on! The AC has to be turned on though, It can't just be the blower/fan. The AC also makes a whistling sound. Any idea why it idles normally when the AC is turned on? |
Re: Erratic Idle
OK! I found out something today. The erratic Idle stops when the AC is
turned on! The AC has to be turned on though, It can't just be the blower/fan. The AC also makes a whistling sound. Any idea why it idles normally when the AC is turned on? |
Re: Erratic Idle
ftdn wrote:
> OK! I found out something today. The erratic Idle stops when the AC is > turned on! The AC has to be turned on though, It can't just be the > blower/fan. The AC also makes a whistling sound. Any idea why it > idles normally when the AC is turned on? Engaging the A/C kicks up the throttle a bit to compensate for the additional drag of the compressor. I'd really be suspecting a vacuum leak at this point. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-3, 05/19/2006 Tested on: 5/20/2006 11:12:33 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
ftdn wrote:
> OK! I found out something today. The erratic Idle stops when the AC is > turned on! The AC has to be turned on though, It can't just be the > blower/fan. The AC also makes a whistling sound. Any idea why it > idles normally when the AC is turned on? Engaging the A/C kicks up the throttle a bit to compensate for the additional drag of the compressor. I'd really be suspecting a vacuum leak at this point. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-3, 05/19/2006 Tested on: 5/20/2006 11:12:33 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
ftdn wrote:
> OK! I found out something today. The erratic Idle stops when the AC is > turned on! The AC has to be turned on though, It can't just be the > blower/fan. The AC also makes a whistling sound. Any idea why it > idles normally when the AC is turned on? Engaging the A/C kicks up the throttle a bit to compensate for the additional drag of the compressor. I'd really be suspecting a vacuum leak at this point. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0620-3, 05/19/2006 Tested on: 5/20/2006 11:12:33 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Anyone know what the best way is to find out where the vacuum leak is?
"Matt Ion" <soundy@moltenimage.com> wrote in message news:pxTbg.179713$WI1.15548@pd7tw2no... > ftdn wrote: >> OK! I found out something today. The erratic Idle stops when the AC is >> turned on! The AC has to be turned on though, It can't just be the >> blower/fan. The AC also makes a whistling sound. Any idea why it >> idles normally when the AC is turned on? > > Engaging the A/C kicks up the throttle a bit to compensate for the > additional drag of the compressor. > > I'd really be suspecting a vacuum leak at this point. > > > --- > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 0620-3, 05/19/2006 > Tested on: 5/20/2006 11:12:33 PM > avast! - copyright (c) 1988-2006 ALWIL Software. > http://www.avast.com > > > |
Re: Erratic Idle
Anyone know what the best way is to find out where the vacuum leak is?
"Matt Ion" <soundy@moltenimage.com> wrote in message news:pxTbg.179713$WI1.15548@pd7tw2no... > ftdn wrote: >> OK! I found out something today. The erratic Idle stops when the AC is >> turned on! The AC has to be turned on though, It can't just be the >> blower/fan. The AC also makes a whistling sound. Any idea why it >> idles normally when the AC is turned on? > > Engaging the A/C kicks up the throttle a bit to compensate for the > additional drag of the compressor. > > I'd really be suspecting a vacuum leak at this point. > > > --- > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 0620-3, 05/19/2006 > Tested on: 5/20/2006 11:12:33 PM > avast! - copyright (c) 1988-2006 ALWIL Software. > http://www.avast.com > > > |
Re: Erratic Idle
Anyone know what the best way is to find out where the vacuum leak is?
"Matt Ion" <soundy@moltenimage.com> wrote in message news:pxTbg.179713$WI1.15548@pd7tw2no... > ftdn wrote: >> OK! I found out something today. The erratic Idle stops when the AC is >> turned on! The AC has to be turned on though, It can't just be the >> blower/fan. The AC also makes a whistling sound. Any idea why it >> idles normally when the AC is turned on? > > Engaging the A/C kicks up the throttle a bit to compensate for the > additional drag of the compressor. > > I'd really be suspecting a vacuum leak at this point. > > > --- > avast! Antivirus: Outbound message clean. > Virus Database (VPS): 0620-3, 05/19/2006 > Tested on: 5/20/2006 11:12:33 PM > avast! - copyright (c) 1988-2006 ALWIL Software. > http://www.avast.com > > > |
Re: Erratic Idle
Hootie wrote:
> Anyone know what the best way is to find out where the vacuum leak is? A good pair of humanoid auditory sensors. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-1, 05/22/2006 Tested on: 5/22/2006 1:49:56 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Hootie wrote:
> Anyone know what the best way is to find out where the vacuum leak is? A good pair of humanoid auditory sensors. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-1, 05/22/2006 Tested on: 5/22/2006 1:49:56 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Hootie wrote:
> Anyone know what the best way is to find out where the vacuum leak is? A good pair of humanoid auditory sensors. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-1, 05/22/2006 Tested on: 5/22/2006 1:49:56 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
"Hootie" <hootie@hootie.com> wrote in message
news:nilcg.181249$P01.80454@pd7tw3no... > Anyone know what the best way is to find out where the vacuum leak is? > Since most vacuum leaks come from cracks in the rubber vacuum hose where it attaches to nipples in various places (okay, guys, wipe those weird images out of your minds!) you can take any of the common approaches: *buy a bunch of vacuum hose in all the sizes you see under the hood and spend an hour or so replacing them all. The cost is reasonable and the benefits are lasting. *feel near the end of each hose for cracks and replace or trim the cracked end from the bad one(s). Repeat next time there is a vacuum leak. *if you can hear a whistle, try to isolate it. It isn't easy, but combined with the change in pitch if you get your finger on a crack it may pan out. Repeat next time.... *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses that come off the intake manifold hold vacuum. It is also possible to do it with the suck to draw a vacuum and place your tongue over the end to see if it holds, but that is really the po' boy's method and can get you an odd reputation. Repeat next time.... Mike |
Re: Erratic Idle
"Hootie" <hootie@hootie.com> wrote in message
news:nilcg.181249$P01.80454@pd7tw3no... > Anyone know what the best way is to find out where the vacuum leak is? > Since most vacuum leaks come from cracks in the rubber vacuum hose where it attaches to nipples in various places (okay, guys, wipe those weird images out of your minds!) you can take any of the common approaches: *buy a bunch of vacuum hose in all the sizes you see under the hood and spend an hour or so replacing them all. The cost is reasonable and the benefits are lasting. *feel near the end of each hose for cracks and replace or trim the cracked end from the bad one(s). Repeat next time there is a vacuum leak. *if you can hear a whistle, try to isolate it. It isn't easy, but combined with the change in pitch if you get your finger on a crack it may pan out. Repeat next time.... *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses that come off the intake manifold hold vacuum. It is also possible to do it with the suck to draw a vacuum and place your tongue over the end to see if it holds, but that is really the po' boy's method and can get you an odd reputation. Repeat next time.... Mike |
Re: Erratic Idle
"Hootie" <hootie@hootie.com> wrote in message
news:nilcg.181249$P01.80454@pd7tw3no... > Anyone know what the best way is to find out where the vacuum leak is? > Since most vacuum leaks come from cracks in the rubber vacuum hose where it attaches to nipples in various places (okay, guys, wipe those weird images out of your minds!) you can take any of the common approaches: *buy a bunch of vacuum hose in all the sizes you see under the hood and spend an hour or so replacing them all. The cost is reasonable and the benefits are lasting. *feel near the end of each hose for cracks and replace or trim the cracked end from the bad one(s). Repeat next time there is a vacuum leak. *if you can hear a whistle, try to isolate it. It isn't easy, but combined with the change in pitch if you get your finger on a crack it may pan out. Repeat next time.... *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses that come off the intake manifold hold vacuum. It is also possible to do it with the suck to draw a vacuum and place your tongue over the end to see if it holds, but that is really the po' boy's method and can get you an odd reputation. Repeat next time.... Mike |
Re: Erratic Idle
Michael Pardee wrote:
> "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-2, 05/23/2006 Tested on: 5/23/2006 6:37:32 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Michael Pardee wrote:
> "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-2, 05/23/2006 Tested on: 5/23/2006 6:37:32 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
Michael Pardee wrote:
> "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0621-2, 05/23/2006 Tested on: 5/23/2006 6:37:32 PM avast! - copyright (c) 1988-2006 ALWIL Software. http://www.avast.com |
Re: Erratic Idle
In article <xNOcg.185510$WI1.13169@pd7tw2no>, Matt Ion
<soundy@moltenimage.com> wrote: Michael Pardee wrote: > "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. That's a unique method. It's far superior to the method that I learned. We learned to remove each vacuum line and pinching off one end while we blowed into it as hard as we could. They now have a device called a "vacuum/pressure tester" that makes it easier. However, you method would work in some cases. Jason |
Re: Erratic Idle
In article <xNOcg.185510$WI1.13169@pd7tw2no>, Matt Ion
<soundy@moltenimage.com> wrote: Michael Pardee wrote: > "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. That's a unique method. It's far superior to the method that I learned. We learned to remove each vacuum line and pinching off one end while we blowed into it as hard as we could. They now have a device called a "vacuum/pressure tester" that makes it easier. However, you method would work in some cases. Jason |
Re: Erratic Idle
In article <xNOcg.185510$WI1.13169@pd7tw2no>, Matt Ion
<soundy@moltenimage.com> wrote: Michael Pardee wrote: > "Hootie" <hootie@hootie.com> wrote in message > news:nilcg.181249$P01.80454@pd7tw3no... > >>Anyone know what the best way is to find out where the vacuum leak is? >> > > Since most vacuum leaks come from cracks in the rubber vacuum hose where it > attaches to nipples in various places (okay, guys, wipe those weird images > out of your minds!) you can take any of the common approaches: > *buy a bunch of vacuum hose in all the sizes you see under the hood and > spend an hour or so replacing them all. The cost is reasonable and the > benefits are lasting. > *feel near the end of each hose for cracks and replace or trim the cracked > end from the bad one(s). Repeat next time there is a vacuum leak. > *if you can hear a whistle, try to isolate it. It isn't easy, but combined > with the change in pitch if you get your finger on a crack it may pan out. > Repeat next time.... > *buy a vacuum pump/guage combo - about $30 US IIRC - and see which hoses > that come off the intake manifold hold vacuum. It is also possible to do it > with the suck to draw a vacuum and place your tongue over the end to see if > it holds, but that is really the po' boy's method and can get you an odd > reputation. Repeat next time.... I had a leaky vacuum-advance diaphragm on my Accord's distributor that I didn't know about because it wasn't audible like a leaky hose tends to be.... I found it by pinching off the vacuum hoses (gently, with non-serrated pliers) one at a time until pinching one caused a noticeable change to the engine sound, speeding up a bit and smoothing out. Start where the hoses come off the carb, throttle body, and/or intake manifold with this one, and if you find one that has an effect, you can move outward from there. That's a unique method. It's far superior to the method that I learned. We learned to remove each vacuum line and pinching off one end while we blowed into it as hard as we could. They now have a device called a "vacuum/pressure tester" that makes it easier. However, you method would work in some cases. Jason |
| All times are GMT -4. The time now is 09:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands