Front turn signal lamp
 

Has anyone experienced replacing a bulb in the front turn signal on a 1988
Honda Accord LXi?
The owner's manual shows a screw in the well that holds the light assembly,
but the screw head is covered by the lens. Do you have to remove the lens
assembly first to get to the screw?
Any ideas?
Thanks,
gperry

Re: Front turn signal lamp
 

Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob

gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry

Re: Front turn signal lamp
 

Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob

gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry

Re: Front turn signal lamp
 

Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob

gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry

Re: Front turn signal lamp
 

Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob

gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry