Front turn signal lamp
#1
Guest
Posts: n/a
Front turn signal lamp
Has anyone experienced replacing a bulb in the front turn signal on a 1988
Honda Accord LXi?
The owner's manual shows a screw in the well that holds the light assembly,
but the screw head is covered by the lens. Do you have to remove the lens
assembly first to get to the screw?
Any ideas?
Thanks,
gperry
Honda Accord LXi?
The owner's manual shows a screw in the well that holds the light assembly,
but the screw head is covered by the lens. Do you have to remove the lens
assembly first to get to the screw?
Any ideas?
Thanks,
gperry
#2
Guest
Posts: n/a
Re: Front turn signal lamp
Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
#3
Guest
Posts: n/a
Re: Front turn signal lamp
Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
#4
Guest
Posts: n/a
Re: Front turn signal lamp
Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
#5
Guest
Posts: n/a
Re: Front turn signal lamp
Look at the underside of the lens unit, on the inboard side. There is a
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
screw that goes up into the bumper. Remove the screw and the lens will
swing out from the front. bob
gperry wrote:
>
> Has anyone experienced replacing a bulb in the front turn signal on a 1988
> Honda Accord LXi?
> The owner's manual shows a screw in the well that holds the light assembly,
> but the screw head is covered by the lens. Do you have to remove the lens
> assembly first to get to the screw?
> Any ideas?
> Thanks,
> gperry
Thread
Thread Starter
Forum
Replies
Last Post
96SilverRam
Car Care / Detailing / Paint / Visual Mods
3
10-21-2008 08:00 PM
monchingg
Honda Accord
3
07-11-2008 11:40 AM
Chief_Billy@hotmail.com
Honda Mailing List
1
05-25-2008 11:38 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)