headlight buld deformed
01-17-2005, 10:40 PM
#2
Guest
Posts: n/a
Re: headlight buld deformed
Gary and Karla wrote:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them had a
> strange bubble protrusion from the side of the bulb but were still burning.
> What would cause this?
---------------------
The last human to touch the lamps had been eating potato chips (or
something simila). Honest :-)
'Curly'
> I just replaced both low beam headlight bulbs. 98 accord.Both of them had a
> strange bubble protrusion from the side of the bulb but were still burning.
> What would cause this?
---------------------
The last human to touch the lamps had been eating potato chips (or
something simila). Honest :-)
'Curly'
01-17-2005, 10:40 PM
#3
Guest
Posts: n/a
Re: headlight buld deformed
Gary and Karla wrote:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them had a
> strange bubble protrusion from the side of the bulb but were still burning.
> What would cause this?
---------------------
The last human to touch the lamps had been eating potato chips (or
something simila). Honest :-)
'Curly'
> I just replaced both low beam headlight bulbs. 98 accord.Both of them had a
> strange bubble protrusion from the side of the bulb but were still burning.
> What would cause this?
---------------------
The last human to touch the lamps had been eating potato chips (or
something simila). Honest :-)
'Curly'
01-17-2005, 11:16 PM
#4
Guest
Posts: n/a
Re: headlight buld deformed
"motsco_ _" <"motsco_ _"@interbaun.com> wrote in
news:41EC8535.4080604@interbaun.com:
> Gary and Karla wrote:
>> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> had a strange bubble protrusion from the side of the bulb but were
>> still burning. What would cause this?
>
>
> ---------------------
> The last human to touch the lamps
Last "human"? Not counting aliens here, are you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:41EC8535.4080604@interbaun.com:
> Gary and Karla wrote:
>> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> had a strange bubble protrusion from the side of the bulb but were
>> still burning. What would cause this?
>
>
> ---------------------
> The last human to touch the lamps
Last "human"? Not counting aliens here, are you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-17-2005, 11:16 PM
#5
Guest
Posts: n/a
Re: headlight buld deformed
"motsco_ _" <"motsco_ _"@interbaun.com> wrote in
news:41EC8535.4080604@interbaun.com:
> Gary and Karla wrote:
>> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> had a strange bubble protrusion from the side of the bulb but were
>> still burning. What would cause this?
>
>
> ---------------------
> The last human to touch the lamps
Last "human"? Not counting aliens here, are you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:41EC8535.4080604@interbaun.com:
> Gary and Karla wrote:
>> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> had a strange bubble protrusion from the side of the bulb but were
>> still burning. What would cause this?
>
>
> ---------------------
> The last human to touch the lamps
Last "human"? Not counting aliens here, are you?
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-17-2005, 11:59 PM
#6
Guest
Posts: n/a
Re: headlight buld deformed
"TeGGer®" wrote:
>
> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
> news:41EC8535.4080604@interbaun.com:
>
> > Gary and Karla wrote:
> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> >> had a strange bubble protrusion from the side of the bulb but were
> >> still burning. What would cause this?
> >
> >
> > ---------------------
> > The last human to touch the lamps
>
> Last "human"? Not counting aliens here, are you?
>
Every alien I know is allergic to potato chips, so we can count them
out.
01-17-2005, 11:59 PM
#7
Guest
Posts: n/a
Re: headlight buld deformed
"TeGGer®" wrote:
>
> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
> news:41EC8535.4080604@interbaun.com:
>
> > Gary and Karla wrote:
> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> >> had a strange bubble protrusion from the side of the bulb but were
> >> still burning. What would cause this?
> >
> >
> > ---------------------
> > The last human to touch the lamps
>
> Last "human"? Not counting aliens here, are you?
>
Every alien I know is allergic to potato chips, so we can count them
out.
01-18-2005, 08:20 AM
#8
Guest
Posts: n/a
Re: headlight buld deformed
Randolph <trash@junkmail.com> wrote in news:41EC97A3.4C99F78D@junkmail.com:
>
> "TeGGer®" wrote:
>>
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
>
:^)
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
>
> "TeGGer®" wrote:
>>
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
>
:^)
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-18-2005, 08:20 AM
#9
Guest
Posts: n/a
Re: headlight buld deformed
Randolph <trash@junkmail.com> wrote in news:41EC97A3.4C99F78D@junkmail.com:
>
> "TeGGer®" wrote:
>>
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
>
:^)
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
>
> "TeGGer®" wrote:
>>
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
>
:^)
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
01-18-2005, 10:38 AM
#10
Guest
Posts: n/a
Re: headlight buld deformed
"Gary and Karla" <klawre@alltel.net> wrote in
news:gNYGd.425$811.148@fe61.usenetserver.com:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> had a strange bubble protrusion from the side of the bulb but were
> still burning. What would cause this?
>
The bulb installer left oils from their skin on the bulb from touching
it.The oils carbonize from the heat,and then get the quartz glass even
hotter,it creats a hot spot melting the glass.
That is why one should use gloves or a paper towel/cloth to hold the bulb
when installing halogen lamps.
--
Jim Yanik
jyanik
at
kua.net
news:gNYGd.425$811.148@fe61.usenetserver.com:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> had a strange bubble protrusion from the side of the bulb but were
> still burning. What would cause this?
>
The bulb installer left oils from their skin on the bulb from touching
it.The oils carbonize from the heat,and then get the quartz glass even
hotter,it creats a hot spot melting the glass.
That is why one should use gloves or a paper towel/cloth to hold the bulb
when installing halogen lamps.
--
Jim Yanik
jyanik
at
kua.net
01-18-2005, 10:38 AM
#11
Guest
Posts: n/a
Re: headlight buld deformed
"Gary and Karla" <klawre@alltel.net> wrote in
news:gNYGd.425$811.148@fe61.usenetserver.com:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> had a strange bubble protrusion from the side of the bulb but were
> still burning. What would cause this?
>
The bulb installer left oils from their skin on the bulb from touching
it.The oils carbonize from the heat,and then get the quartz glass even
hotter,it creats a hot spot melting the glass.
That is why one should use gloves or a paper towel/cloth to hold the bulb
when installing halogen lamps.
--
Jim Yanik
jyanik
at
kua.net
news:gNYGd.425$811.148@fe61.usenetserver.com:
> I just replaced both low beam headlight bulbs. 98 accord.Both of them
> had a strange bubble protrusion from the side of the bulb but were
> still burning. What would cause this?
>
The bulb installer left oils from their skin on the bulb from touching
it.The oils carbonize from the heat,and then get the quartz glass even
hotter,it creats a hot spot melting the glass.
That is why one should use gloves or a paper towel/cloth to hold the bulb
when installing halogen lamps.
--
Jim Yanik
jyanik
at
kua.net
01-18-2005, 10:06 PM
#12
Guest
Posts: n/a
Re: headlight buld deformed
"Randolph" <trash@junkmail.com> wrote in message
news:41EC97A3.4C99F78D@junkmail.com...
>
> "TeGGer®" wrote:
>>
>> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
>> news:41EC8535.4080604@interbaun.com:
>>
>> > Gary and Karla wrote:
>> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> >> had a strange bubble protrusion from the side of the bulb but were
>> >> still burning. What would cause this?
>> >
>> >
>> > ---------------------
>> > The last human to touch the lamps
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
The mystery deepens.... Must be a human masquerading as an alien.
Mike
news:41EC97A3.4C99F78D@junkmail.com...
>
> "TeGGer®" wrote:
>>
>> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
>> news:41EC8535.4080604@interbaun.com:
>>
>> > Gary and Karla wrote:
>> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> >> had a strange bubble protrusion from the side of the bulb but were
>> >> still burning. What would cause this?
>> >
>> >
>> > ---------------------
>> > The last human to touch the lamps
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
The mystery deepens.... Must be a human masquerading as an alien.
Mike
01-18-2005, 10:06 PM
#13
Guest
Posts: n/a
Re: headlight buld deformed
"Randolph" <trash@junkmail.com> wrote in message
news:41EC97A3.4C99F78D@junkmail.com...
>
> "TeGGer®" wrote:
>>
>> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
>> news:41EC8535.4080604@interbaun.com:
>>
>> > Gary and Karla wrote:
>> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> >> had a strange bubble protrusion from the side of the bulb but were
>> >> still burning. What would cause this?
>> >
>> >
>> > ---------------------
>> > The last human to touch the lamps
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
The mystery deepens.... Must be a human masquerading as an alien.
Mike
news:41EC97A3.4C99F78D@junkmail.com...
>
> "TeGGer®" wrote:
>>
>> "motsco_ _" <"motsco_ _"@interbaun.com> wrote in
>> news:41EC8535.4080604@interbaun.com:
>>
>> > Gary and Karla wrote:
>> >> I just replaced both low beam headlight bulbs. 98 accord.Both of them
>> >> had a strange bubble protrusion from the side of the bulb but were
>> >> still burning. What would cause this?
>> >
>> >
>> > ---------------------
>> > The last human to touch the lamps
>>
>> Last "human"? Not counting aliens here, are you?
>>
>
> Every alien I know is allergic to potato chips, so we can count them
> out.
The mystery deepens.... Must be a human masquerading as an alien.
Mike
01-27-2005, 05:58 PM
#14
Guest
Posts: n/a
Re: headlight buld deformed
Jim is correct, as well as motsco. In high school, many years ago, I was on
stage crew, and if you touched the FOH, (Front of House) lights they bulbed
out. We called it Silzerizing, after a teacher who had a rather large noze.
Dan
"Jim Yanik" <jyanik@abuse.gov.> wrote in message
news:Xns95E26C2F99A17jyanikkuanet@129.250.170.84.. .
> "Gary and Karla" <klawre@alltel.net> wrote in
> news:gNYGd.425$811.148@fe61.usenetserver.com:
>
> > I just replaced both low beam headlight bulbs. 98 accord.Both of them
> > had a strange bubble protrusion from the side of the bulb but were
> > still burning. What would cause this?
> >
>
> The bulb installer left oils from their skin on the bulb from touching
> it.The oils carbonize from the heat,and then get the quartz glass even
> hotter,it creats a hot spot melting the glass.
>
> That is why one should use gloves or a paper towel/cloth to hold the bulb
> when installing halogen lamps.
>
> --
> Jim Yanik
> jyanik
> at
> kua.net
stage crew, and if you touched the FOH, (Front of House) lights they bulbed
out. We called it Silzerizing, after a teacher who had a rather large noze.
Dan
"Jim Yanik" <jyanik@abuse.gov.> wrote in message
news:Xns95E26C2F99A17jyanikkuanet@129.250.170.84.. .
> "Gary and Karla" <klawre@alltel.net> wrote in
> news:gNYGd.425$811.148@fe61.usenetserver.com:
>
> > I just replaced both low beam headlight bulbs. 98 accord.Both of them
> > had a strange bubble protrusion from the side of the bulb but were
> > still burning. What would cause this?
> >
>
> The bulb installer left oils from their skin on the bulb from touching
> it.The oils carbonize from the heat,and then get the quartz glass even
> hotter,it creats a hot spot melting the glass.
>
> That is why one should use gloves or a paper towel/cloth to hold the bulb
> when installing halogen lamps.
>
> --
> Jim Yanik
> jyanik
> at
> kua.net
01-27-2005, 05:58 PM
#15
Guest
Posts: n/a
Re: headlight buld deformed
Jim is correct, as well as motsco. In high school, many years ago, I was on
stage crew, and if you touched the FOH, (Front of House) lights they bulbed
out. We called it Silzerizing, after a teacher who had a rather large noze.
Dan
"Jim Yanik" <jyanik@abuse.gov.> wrote in message
news:Xns95E26C2F99A17jyanikkuanet@129.250.170.84.. .
> "Gary and Karla" <klawre@alltel.net> wrote in
> news:gNYGd.425$811.148@fe61.usenetserver.com:
>
> > I just replaced both low beam headlight bulbs. 98 accord.Both of them
> > had a strange bubble protrusion from the side of the bulb but were
> > still burning. What would cause this?
> >
>
> The bulb installer left oils from their skin on the bulb from touching
> it.The oils carbonize from the heat,and then get the quartz glass even
> hotter,it creats a hot spot melting the glass.
>
> That is why one should use gloves or a paper towel/cloth to hold the bulb
> when installing halogen lamps.
>
> --
> Jim Yanik
> jyanik
> at
> kua.net
stage crew, and if you touched the FOH, (Front of House) lights they bulbed
out. We called it Silzerizing, after a teacher who had a rather large noze.
Dan
"Jim Yanik" <jyanik@abuse.gov.> wrote in message
news:Xns95E26C2F99A17jyanikkuanet@129.250.170.84.. .
> "Gary and Karla" <klawre@alltel.net> wrote in
> news:gNYGd.425$811.148@fe61.usenetserver.com:
>
> > I just replaced both low beam headlight bulbs. 98 accord.Both of them
> > had a strange bubble protrusion from the side of the bulb but were
> > still burning. What would cause this?
> >
>
> The bulb installer left oils from their skin on the bulb from touching
> it.The oils carbonize from the heat,and then get the quartz glass even
> hotter,it creats a hot spot melting the glass.
>
> That is why one should use gloves or a paper towel/cloth to hold the bulb
> when installing halogen lamps.
>
> --
> Jim Yanik
> jyanik
> at
> kua.net
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)