Honda OE Power Steering Fluid Colour
#1
Guest
Posts: n/a
Honda OE Power Steering Fluid Colour
I was just wondering if anyone knows what colour the Honda original power
steering fluid colour would be/would have been on a 1992 Honda Accord EX,
F22A?
I checked the power steering fluid tonight, it was low, but besides that, it
was pink/red. What I'm scared of is that the previous "mechanic" decided to
use tranny fluid instead of the proper Honda power steering fluid. Also
curious as to what harm it might cause if he did.
The reservoir was almost empty and I dumped a full 355ml bottle of the
correct fluid in.
Steve
steering fluid colour would be/would have been on a 1992 Honda Accord EX,
F22A?
I checked the power steering fluid tonight, it was low, but besides that, it
was pink/red. What I'm scared of is that the previous "mechanic" decided to
use tranny fluid instead of the proper Honda power steering fluid. Also
curious as to what harm it might cause if he did.
The reservoir was almost empty and I dumped a full 355ml bottle of the
correct fluid in.
Steve
#2
Guest
Posts: n/a
Re: Honda OE Power Steering Fluid Colour
"Steve Mackie" <stevemackie@ns.sympatico.ca> wrote in
news:xpF0f.104287$Ph4.3174548@ursa-nb00s0.nbnet.nb.ca:
> I was just wondering if anyone knows what colour the Honda original
> power steering fluid colour would be/would have been on a 1992 Honda
> Accord EX, F22A?
>
> I checked the power steering fluid tonight, it was low, but besides
> that, it was pink/red. What I'm scared of is that the previous
> "mechanic" decided to use tranny fluid instead of the proper Honda
> power steering fluid. Also curious as to what harm it might cause if
> he did.
>
> The reservoir was almost empty and I dumped a full 355ml bottle of the
> correct fluid in.
>
Correct fluid is pretty much clear when new, and darkens to a brown as it
ages.
If you find pinky-red in there, get rid of it real soon! Seals will leak if
it's left in there long enough, and the pump will get damaged.
You can get most of it out this way:
1) Jack both front wheels off the ground. If you cannot get both off the
ground at the same time, jack up each front wheel in turn and place a dozen
sheets of newspaper under them. This will reduce friction so the wheels
will turn easily.
2) Use turkey baster to suck reservoir dry
3) Disconnect return hose (highest on the reservoir) and place end in
bottle.
4) Start engine
5) turn steering wheel lock-to lock a couple of times, *just* until fluid
stops coming out of the return hose.
6) Turn engine off, reconnect return hose.
7) Fill reservoir
8) Start engine, spin wheel lock-to-lock, add fluid, repeat until no more
*new* foam or bubbles appear. Two or three go-arounds should do it.
9) Drive car around for few minutes, check fluid, add as necessary.
10) Let car sit overnight.
11) Check fluid again and add final top-up.
Might be a good idea to repeat this one more time to make certain as much
of the bad stuff is gone.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:xpF0f.104287$Ph4.3174548@ursa-nb00s0.nbnet.nb.ca:
> I was just wondering if anyone knows what colour the Honda original
> power steering fluid colour would be/would have been on a 1992 Honda
> Accord EX, F22A?
>
> I checked the power steering fluid tonight, it was low, but besides
> that, it was pink/red. What I'm scared of is that the previous
> "mechanic" decided to use tranny fluid instead of the proper Honda
> power steering fluid. Also curious as to what harm it might cause if
> he did.
>
> The reservoir was almost empty and I dumped a full 355ml bottle of the
> correct fluid in.
>
Correct fluid is pretty much clear when new, and darkens to a brown as it
ages.
If you find pinky-red in there, get rid of it real soon! Seals will leak if
it's left in there long enough, and the pump will get damaged.
You can get most of it out this way:
1) Jack both front wheels off the ground. If you cannot get both off the
ground at the same time, jack up each front wheel in turn and place a dozen
sheets of newspaper under them. This will reduce friction so the wheels
will turn easily.
2) Use turkey baster to suck reservoir dry
3) Disconnect return hose (highest on the reservoir) and place end in
bottle.
4) Start engine
5) turn steering wheel lock-to lock a couple of times, *just* until fluid
stops coming out of the return hose.
6) Turn engine off, reconnect return hose.
7) Fill reservoir
8) Start engine, spin wheel lock-to-lock, add fluid, repeat until no more
*new* foam or bubbles appear. Two or three go-arounds should do it.
9) Drive car around for few minutes, check fluid, add as necessary.
10) Let car sit overnight.
11) Check fluid again and add final top-up.
Might be a good idea to repeat this one more time to make certain as much
of the bad stuff is gone.
--
TeGGeR®
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
Tom
Hyundai Mailing List
2
12-05-2007 12:59 PM
relate25
Honda Civic - Del Sol - CRX
2
06-14-2007 02:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)