Honda Seals
02-25-2005, 04:34 PM
#2
Guest
Posts: n/a
Re: Honda Seals
on the tube seals you can use just motor oil or whateve to facilitate
installation and help avoid chaffing or nicking the o-rings. The valve
cover gasket shouldn't need anything except a dab of sealer at a couple
areas notated in the manual.
"Trail Shredder" <trail@shred.com> wrote in message
news:uBMTd.3290$m14.1605@fe2.columbus.rr.com...
> Going to be replacing my valve cover gaskets and tube seals this weekend
> on my 92 accord. Should I put a slight oil coating on them or silicone
> grease or just dry?
>
installation and help avoid chaffing or nicking the o-rings. The valve
cover gasket shouldn't need anything except a dab of sealer at a couple
areas notated in the manual.
"Trail Shredder" <trail@shred.com> wrote in message
news:uBMTd.3290$m14.1605@fe2.columbus.rr.com...
> Going to be replacing my valve cover gaskets and tube seals this weekend
> on my 92 accord. Should I put a slight oil coating on them or silicone
> grease or just dry?
>
02-25-2005, 04:34 PM
#3
Guest
Posts: n/a
Re: Honda Seals
on the tube seals you can use just motor oil or whateve to facilitate
installation and help avoid chaffing or nicking the o-rings. The valve
cover gasket shouldn't need anything except a dab of sealer at a couple
areas notated in the manual.
"Trail Shredder" <trail@shred.com> wrote in message
news:uBMTd.3290$m14.1605@fe2.columbus.rr.com...
> Going to be replacing my valve cover gaskets and tube seals this weekend
> on my 92 accord. Should I put a slight oil coating on them or silicone
> grease or just dry?
>
installation and help avoid chaffing or nicking the o-rings. The valve
cover gasket shouldn't need anything except a dab of sealer at a couple
areas notated in the manual.
"Trail Shredder" <trail@shred.com> wrote in message
news:uBMTd.3290$m14.1605@fe2.columbus.rr.com...
> Going to be replacing my valve cover gaskets and tube seals this weekend
> on my 92 accord. Should I put a slight oil coating on them or silicone
> grease or just dry?
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)