Need advice re: testing equipment
#16
Guest
Posts: n/a
Re: Need advice re: testing equipment
> "Bill B. Johnson" <billbjohnson555@nospamhotmail.com> wrote
> > Sarah's father does not have hardly any car repair equipment but does
have
> > an excellent collection of tools. He has a OBD II scanner. He also has a
> > timing light and a device (multimeter) to test the voltage of his
battery.
> > He also has a repair manual for the Mustang. I want to
> > buy him a device for less than a $100.00. What device should I buy him
for
> > Christmas to help him figure out what is wrong if his fairly new Ford
> > Mustang develops a problem?
>
>"Caroline"
> That collection of tools include a torque wrench?
>
> I think I'm going to finally add one to my collection of tools this year.
It
> will be used exclusively when repairing and maintaining my car.
Harbor freight sells identical 1/2" clicking torque wrench for $12 sometimes
vs $45 at Autozone. If I were to spend $50, It'll be Craftsman. Also, a
problem with most 1/2 torque wrench is the inability to go under 10 lbs. I
keep another set for this purpose. In your case you could hook up a spring
scale.
> > Sarah's father does not have hardly any car repair equipment but does
have
> > an excellent collection of tools. He has a OBD II scanner. He also has a
> > timing light and a device (multimeter) to test the voltage of his
battery.
> > He also has a repair manual for the Mustang. I want to
> > buy him a device for less than a $100.00. What device should I buy him
for
> > Christmas to help him figure out what is wrong if his fairly new Ford
> > Mustang develops a problem?
>
>"Caroline"
> That collection of tools include a torque wrench?
>
> I think I'm going to finally add one to my collection of tools this year.
It
> will be used exclusively when repairing and maintaining my car.
Harbor freight sells identical 1/2" clicking torque wrench for $12 sometimes
vs $45 at Autozone. If I were to spend $50, It'll be Craftsman. Also, a
problem with most 1/2 torque wrench is the inability to go under 10 lbs. I
keep another set for this purpose. In your case you could hook up a spring
scale.
#17
Guest
Posts: n/a
Re: Need advice re: testing equipment
> "Bill B. Johnson" <billbjohnson555@nospamhotmail.com> wrote
> > Sarah's father does not have hardly any car repair equipment but does
have
> > an excellent collection of tools. He has a OBD II scanner. He also has a
> > timing light and a device (multimeter) to test the voltage of his
battery.
> > He also has a repair manual for the Mustang. I want to
> > buy him a device for less than a $100.00. What device should I buy him
for
> > Christmas to help him figure out what is wrong if his fairly new Ford
> > Mustang develops a problem?
>
>"Caroline"
> That collection of tools include a torque wrench?
>
> I think I'm going to finally add one to my collection of tools this year.
It
> will be used exclusively when repairing and maintaining my car.
Harbor freight sells identical 1/2" clicking torque wrench for $12 sometimes
vs $45 at Autozone. If I were to spend $50, It'll be Craftsman. Also, a
problem with most 1/2 torque wrench is the inability to go under 10 lbs. I
keep another set for this purpose. In your case you could hook up a spring
scale.
> > Sarah's father does not have hardly any car repair equipment but does
have
> > an excellent collection of tools. He has a OBD II scanner. He also has a
> > timing light and a device (multimeter) to test the voltage of his
battery.
> > He also has a repair manual for the Mustang. I want to
> > buy him a device for less than a $100.00. What device should I buy him
for
> > Christmas to help him figure out what is wrong if his fairly new Ford
> > Mustang develops a problem?
>
>"Caroline"
> That collection of tools include a torque wrench?
>
> I think I'm going to finally add one to my collection of tools this year.
It
> will be used exclusively when repairing and maintaining my car.
Harbor freight sells identical 1/2" clicking torque wrench for $12 sometimes
vs $45 at Autozone. If I were to spend $50, It'll be Craftsman. Also, a
problem with most 1/2 torque wrench is the inability to go under 10 lbs. I
keep another set for this purpose. In your case you could hook up a spring
scale.
#18
Guest
Posts: n/a
Re: Need advice re: testing equipment
>"Bill B. Johnson" wrote in message
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
#19
Guest
Posts: n/a
Re: Need advice re: testing equipment
>"Bill B. Johnson" wrote in message
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
#20
Guest
Posts: n/a
Re: Need advice re: testing equipment
>"Bill B. Johnson" wrote in message
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
#21
Guest
Posts: n/a
Re: Need advice re: testing equipment
>"Bill B. Johnson" wrote in message
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
>>"Indian Summer" wrote:
> > >"Bill B. Johnson
> > > Sarah's father...What device should I buy him for
> > > Christmas to help him figure out what is wrong if his fairly new Ford
> > > Mustang develops a problem?
> >
> > Digital probe kits $15 or
> > Digital probe kits $0.50 homemade 400-Ohm, LED
> > How to use these items...priceless...
>
>What do you use a digital probe kit for??
Good questions. Few frequents in this newsgroup mention digital diagnostics.
I use them for circuit projects, diagnosing TV, stereos, radios, reading
pulsating automotive electronics below 5V.
> What do you probe??
For automotive application:
Courtesy control units.
Timer units.
ECU
TCU
Igniter inputs
and more...
A practical use on automobiles is the igniter input test. This test
guarantees that a signal is reaching the igniter. Speed sensors, immobilzers
are a few good examples. Probing any circuit is safe and cause no damage.
Imagine hooking a test light into an igniter which usually can't handle no
more than 300 mA. I feel very blind without this tool that's why I learn to
build them even on a deserted island.
Thread
Thread Starter
Forum
Replies
Last Post
paarman97maro
Automotive Pictures & videos
6
11-01-2006 05:37 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)