OBD-II port on 2006 Accord?
Guest
Posts: n/a
Re: OBD-II port on 2006 Accord?
Michael Pardee wrote:
>
> The prescribed location is below the dash on the left side, located so that
> it is readily visible. If the connector is not there a placard is supposed
> to be there to say where the connector is.
Found it! Sits all the way to the left, near the driver's side kick
panel. Socket is mounted facing downward and parallel to the kick
panel. Sits in plain view if you're less than 13" tall or standing on
your head<g>
Thanks all!
>
> The prescribed location is below the dash on the left side, located so that
> it is readily visible. If the connector is not there a placard is supposed
> to be there to say where the connector is.
Found it! Sits all the way to the left, near the driver's side kick
panel. Socket is mounted facing downward and parallel to the kick
panel. Sits in plain view if you're less than 13" tall or standing on
your head<g>
Thanks all!
Guest
Posts: n/a
Re: OBD-II port on 2006 Accord?
Michael Pardee wrote:
>
> The prescribed location is below the dash on the left side, located so that
> it is readily visible. If the connector is not there a placard is supposed
> to be there to say where the connector is.
Found it! Sits all the way to the left, near the driver's side kick
panel. Socket is mounted facing downward and parallel to the kick
panel. Sits in plain view if you're less than 13" tall or standing on
your head<g>
Thanks all!
>
> The prescribed location is below the dash on the left side, located so that
> it is readily visible. If the connector is not there a placard is supposed
> to be there to say where the connector is.
Found it! Sits all the way to the left, near the driver's side kick
panel. Socket is mounted facing downward and parallel to the kick
panel. Sits in plain view if you're less than 13" tall or standing on
your head<g>
Thanks all!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
