Oil Pan With Bad Threading
09-17-2007, 11:42 AM
#1
Guest
Posts: n/a
Oil Pan With Bad Threading
I just got an oil change on Sept 14, 2007, at 186,041 miles.
When the oil change place (not dealer) unscrewed the oil plug and tried to
rescrew it upon putting in the new oil, they said that they had trouble
reattaching the plug. They said that it was due to the threading in the
oil pan that hugs the plug is screwed up.
I've noticed slight oil leaks as a result of this. With all this being
said, I will have to get a new oil pan with new gasket, etc. Can I go
aftermarket on this?
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
More information at http://www.talkaboutautos.com/faq.html
When the oil change place (not dealer) unscrewed the oil plug and tried to
rescrew it upon putting in the new oil, they said that they had trouble
reattaching the plug. They said that it was due to the threading in the
oil pan that hugs the plug is screwed up.
I've noticed slight oil leaks as a result of this. With all this being
said, I will have to get a new oil pan with new gasket, etc. Can I go
aftermarket on this?
--
Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
More information at http://www.talkaboutautos.com/faq.html
09-17-2007, 12:32 PM
#2
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
Sure, aftermarket parts will work.
However, I would say the chances are that they screwed this up at the shop by
over torquing the drain bolt. I would raise hell and tell them to fix it.
If you decide to do the repair yourself, another option is to use a larger
diameter drain bolt. Use the appropriate tap to set the threads properly.
Should solve your problem.
t
warlock162 wrote:
>I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
>When the oil change place (not dealer) unscrewed the oil plug and tried to
>rescrew it upon putting in the new oil, they said that they had trouble
>reattaching the plug. They said that it was due to the threading in the
>oil pan that hugs the plug is screwed up.
>
>I've noticed slight oil leaks as a result of this. With all this being
>said, I will have to get a new oil pan with new gasket, etc. Can I go
>aftermarket on this?
>
>--
>Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
>More information at http://www.talkaboutautos.com/faq.html
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200709/1
However, I would say the chances are that they screwed this up at the shop by
over torquing the drain bolt. I would raise hell and tell them to fix it.
If you decide to do the repair yourself, another option is to use a larger
diameter drain bolt. Use the appropriate tap to set the threads properly.
Should solve your problem.
t
warlock162 wrote:
>I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
>When the oil change place (not dealer) unscrewed the oil plug and tried to
>rescrew it upon putting in the new oil, they said that they had trouble
>reattaching the plug. They said that it was due to the threading in the
>oil pan that hugs the plug is screwed up.
>
>I've noticed slight oil leaks as a result of this. With all this being
>said, I will have to get a new oil pan with new gasket, etc. Can I go
>aftermarket on this?
>
>--
>Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
>More information at http://www.talkaboutautos.com/faq.html
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200709/1
09-17-2007, 12:32 PM
#3
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
Sure, aftermarket parts will work.
However, I would say the chances are that they screwed this up at the shop by
over torquing the drain bolt. I would raise hell and tell them to fix it.
If you decide to do the repair yourself, another option is to use a larger
diameter drain bolt. Use the appropriate tap to set the threads properly.
Should solve your problem.
t
warlock162 wrote:
>I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
>When the oil change place (not dealer) unscrewed the oil plug and tried to
>rescrew it upon putting in the new oil, they said that they had trouble
>reattaching the plug. They said that it was due to the threading in the
>oil pan that hugs the plug is screwed up.
>
>I've noticed slight oil leaks as a result of this. With all this being
>said, I will have to get a new oil pan with new gasket, etc. Can I go
>aftermarket on this?
>
>--
>Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
>More information at http://www.talkaboutautos.com/faq.html
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200709/1
However, I would say the chances are that they screwed this up at the shop by
over torquing the drain bolt. I would raise hell and tell them to fix it.
If you decide to do the repair yourself, another option is to use a larger
diameter drain bolt. Use the appropriate tap to set the threads properly.
Should solve your problem.
t
warlock162 wrote:
>I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
>When the oil change place (not dealer) unscrewed the oil plug and tried to
>rescrew it upon putting in the new oil, they said that they had trouble
>reattaching the plug. They said that it was due to the threading in the
>oil pan that hugs the plug is screwed up.
>
>I've noticed slight oil leaks as a result of this. With all this being
>said, I will have to get a new oil pan with new gasket, etc. Can I go
>aftermarket on this?
>
>--
>Message posted using http://www.talkaboutautos.com/group/alt.autos.honda/
>More information at http://www.talkaboutautos.com/faq.html
--
Message posted via CarKB.com
http://www.carkb.com/Uwe/Forums.aspx...-cars/200709/1
09-17-2007, 07:23 PM
#4
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
"warlock162" <bray@dwsd.org> wrote in
news:f07983faee6bd20fd1f255cbf5af2e4b@localhost.ta lkaboutautos.com:
> I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> When the oil change place (not dealer) unscrewed the oil plug and
> tried to rescrew it upon putting in the new oil, they said that they
> had trouble reattaching the plug. They said that it was due to the
> threading in the oil pan that hugs the plug is screwed up.
>
> I've noticed slight oil leaks as a result of this. With all this
> being said, I will have to get a new oil pan with new gasket, etc.
> Can I go aftermarket on this?
>
>
Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
drain bolt.
The factory-authorized fix involves the installation of a TimeSert thread
repair kit (NOT a "Helicoil"!!!).
If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
give year or model, but this is the kind of thing that often falls under
the "unofficial" extended warranty, provided oil changes have been done by
Honda/Acura dealers...
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:f07983faee6bd20fd1f255cbf5af2e4b@localhost.ta lkaboutautos.com:
> I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> When the oil change place (not dealer) unscrewed the oil plug and
> tried to rescrew it upon putting in the new oil, they said that they
> had trouble reattaching the plug. They said that it was due to the
> threading in the oil pan that hugs the plug is screwed up.
>
> I've noticed slight oil leaks as a result of this. With all this
> being said, I will have to get a new oil pan with new gasket, etc.
> Can I go aftermarket on this?
>
>
Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
drain bolt.
The factory-authorized fix involves the installation of a TimeSert thread
repair kit (NOT a "Helicoil"!!!).
If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
give year or model, but this is the kind of thing that often falls under
the "unofficial" extended warranty, provided oil changes have been done by
Honda/Acura dealers...
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
09-17-2007, 07:23 PM
#5
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
"warlock162" <bray@dwsd.org> wrote in
news:f07983faee6bd20fd1f255cbf5af2e4b@localhost.ta lkaboutautos.com:
> I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> When the oil change place (not dealer) unscrewed the oil plug and
> tried to rescrew it upon putting in the new oil, they said that they
> had trouble reattaching the plug. They said that it was due to the
> threading in the oil pan that hugs the plug is screwed up.
>
> I've noticed slight oil leaks as a result of this. With all this
> being said, I will have to get a new oil pan with new gasket, etc.
> Can I go aftermarket on this?
>
>
Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
drain bolt.
The factory-authorized fix involves the installation of a TimeSert thread
repair kit (NOT a "Helicoil"!!!).
If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
give year or model, but this is the kind of thing that often falls under
the "unofficial" extended warranty, provided oil changes have been done by
Honda/Acura dealers...
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:f07983faee6bd20fd1f255cbf5af2e4b@localhost.ta lkaboutautos.com:
> I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> When the oil change place (not dealer) unscrewed the oil plug and
> tried to rescrew it upon putting in the new oil, they said that they
> had trouble reattaching the plug. They said that it was due to the
> threading in the oil pan that hugs the plug is screwed up.
>
> I've noticed slight oil leaks as a result of this. With all this
> being said, I will have to get a new oil pan with new gasket, etc.
> Can I go aftermarket on this?
>
>
Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
drain bolt.
The factory-authorized fix involves the installation of a TimeSert thread
repair kit (NOT a "Helicoil"!!!).
If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
give year or model, but this is the kind of thing that often falls under
the "unofficial" extended warranty, provided oil changes have been done by
Honda/Acura dealers...
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
09-18-2007, 03:29 PM
#6
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
> "warlock162" <b...@dwsd.org> wrote innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>
> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> > When the oil change place (not dealer) unscrewed the oil plug and
> > tried to rescrew it upon putting in the new oil, they said that they
> > had trouble reattaching the plug. They said that it was due to the
> > threading in the oil pan that hugs the plug is screwed up.
>
> > I've noticed slight oil leaks as a result of this. With all this
> > being said, I will have to get a new oil pan with new gasket, etc.
> > Can I go aftermarket on this?
>
> Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
> drain bolt.
>
> The factory-authorized fix involves the installation of a TimeSert thread
> repair kit (NOT a "Helicoil"!!!).
>
> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
> give year or model, but this is the kind of thing that often falls under
> the "unofficial" extended warranty, provided oil changes have been done by
> Honda/Acura dealers...
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
Or use a Fumoto valve. I have one in my older Civic; no issues
whatsoever.
> "warlock162" <b...@dwsd.org> wrote innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>
> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> > When the oil change place (not dealer) unscrewed the oil plug and
> > tried to rescrew it upon putting in the new oil, they said that they
> > had trouble reattaching the plug. They said that it was due to the
> > threading in the oil pan that hugs the plug is screwed up.
>
> > I've noticed slight oil leaks as a result of this. With all this
> > being said, I will have to get a new oil pan with new gasket, etc.
> > Can I go aftermarket on this?
>
> Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
> drain bolt.
>
> The factory-authorized fix involves the installation of a TimeSert thread
> repair kit (NOT a "Helicoil"!!!).
>
> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
> give year or model, but this is the kind of thing that often falls under
> the "unofficial" extended warranty, provided oil changes have been done by
> Honda/Acura dealers...
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
Or use a Fumoto valve. I have one in my older Civic; no issues
whatsoever.
09-18-2007, 03:29 PM
#7
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
> "warlock162" <b...@dwsd.org> wrote innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>
> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> > When the oil change place (not dealer) unscrewed the oil plug and
> > tried to rescrew it upon putting in the new oil, they said that they
> > had trouble reattaching the plug. They said that it was due to the
> > threading in the oil pan that hugs the plug is screwed up.
>
> > I've noticed slight oil leaks as a result of this. With all this
> > being said, I will have to get a new oil pan with new gasket, etc.
> > Can I go aftermarket on this?
>
> Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
> drain bolt.
>
> The factory-authorized fix involves the installation of a TimeSert thread
> repair kit (NOT a "Helicoil"!!!).
>
> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
> give year or model, but this is the kind of thing that often falls under
> the "unofficial" extended warranty, provided oil changes have been done by
> Honda/Acura dealers...
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
Or use a Fumoto valve. I have one in my older Civic; no issues
whatsoever.
> "warlock162" <b...@dwsd.org> wrote innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>
> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>
> > When the oil change place (not dealer) unscrewed the oil plug and
> > tried to rescrew it upon putting in the new oil, they said that they
> > had trouble reattaching the plug. They said that it was due to the
> > threading in the oil pan that hugs the plug is screwed up.
>
> > I've noticed slight oil leaks as a result of this. With all this
> > being said, I will have to get a new oil pan with new gasket, etc.
> > Can I go aftermarket on this?
>
> Very common Honda problem. Is due to ham-fisted mechanics overtorquing the
> drain bolt.
>
> The factory-authorized fix involves the installation of a TimeSert thread
> repair kit (NOT a "Helicoil"!!!).
>
> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
> give year or model, but this is the kind of thing that often falls under
> the "unofficial" extended warranty, provided oil changes have been done by
> Honda/Acura dealers...
>
> --
> Tegger
>
> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
Or use a Fumoto valve. I have one in my older Civic; no issues
whatsoever.
09-18-2007, 09:51 PM
#8
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
WOW, Been there, done that TWICE.
Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that they
reimbursed me for a dealer installed replacement. That was the LAST time I
stepped foot in a Jiffy Lube.
My second pan was ruined by MY DEALER!! Kudos to them however for owning up
to it after I complained and replacing it at their cost.
Simple solution, new crushable aluminum washer with EACH oil change and
TORQUE the freakin' thing. Places just don't get it.
"gigelus2k3" <popescu.serban@gmail.com> wrote in message
news:1190143751.753587.34600@o80g2000hse.googlegro ups.com...
> On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
>> "warlock162" <b...@dwsd.org> wrote
>> innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>>
>> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>>
>> > When the oil change place (not dealer) unscrewed the oil plug and
>> > tried to rescrew it upon putting in the new oil, they said that they
>> > had trouble reattaching the plug. They said that it was due to the
>> > threading in the oil pan that hugs the plug is screwed up.
>>
>> > I've noticed slight oil leaks as a result of this. With all this
>> > being said, I will have to get a new oil pan with new gasket, etc.
>> > Can I go aftermarket on this?
>>
>> Very common Honda problem. Is due to ham-fisted mechanics overtorquing
>> the
>> drain bolt.
>>
>> The factory-authorized fix involves the installation of a TimeSert thread
>> repair kit (NOT a "Helicoil"!!!).
>>
>> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
>> give year or model, but this is the kind of thing that often falls under
>> the "unofficial" extended warranty, provided oil changes have been done
>> by
>> Honda/Acura dealers...
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
>
> Or use a Fumoto valve. I have one in my older Civic; no issues
> whatsoever.
>
Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that they
reimbursed me for a dealer installed replacement. That was the LAST time I
stepped foot in a Jiffy Lube.
My second pan was ruined by MY DEALER!! Kudos to them however for owning up
to it after I complained and replacing it at their cost.
Simple solution, new crushable aluminum washer with EACH oil change and
TORQUE the freakin' thing. Places just don't get it.
"gigelus2k3" <popescu.serban@gmail.com> wrote in message
news:1190143751.753587.34600@o80g2000hse.googlegro ups.com...
> On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
>> "warlock162" <b...@dwsd.org> wrote
>> innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>>
>> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>>
>> > When the oil change place (not dealer) unscrewed the oil plug and
>> > tried to rescrew it upon putting in the new oil, they said that they
>> > had trouble reattaching the plug. They said that it was due to the
>> > threading in the oil pan that hugs the plug is screwed up.
>>
>> > I've noticed slight oil leaks as a result of this. With all this
>> > being said, I will have to get a new oil pan with new gasket, etc.
>> > Can I go aftermarket on this?
>>
>> Very common Honda problem. Is due to ham-fisted mechanics overtorquing
>> the
>> drain bolt.
>>
>> The factory-authorized fix involves the installation of a TimeSert thread
>> repair kit (NOT a "Helicoil"!!!).
>>
>> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
>> give year or model, but this is the kind of thing that often falls under
>> the "unofficial" extended warranty, provided oil changes have been done
>> by
>> Honda/Acura dealers...
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
>
> Or use a Fumoto valve. I have one in my older Civic; no issues
> whatsoever.
>
09-18-2007, 09:51 PM
#9
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
WOW, Been there, done that TWICE.
Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that they
reimbursed me for a dealer installed replacement. That was the LAST time I
stepped foot in a Jiffy Lube.
My second pan was ruined by MY DEALER!! Kudos to them however for owning up
to it after I complained and replacing it at their cost.
Simple solution, new crushable aluminum washer with EACH oil change and
TORQUE the freakin' thing. Places just don't get it.
"gigelus2k3" <popescu.serban@gmail.com> wrote in message
news:1190143751.753587.34600@o80g2000hse.googlegro ups.com...
> On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
>> "warlock162" <b...@dwsd.org> wrote
>> innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>>
>> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>>
>> > When the oil change place (not dealer) unscrewed the oil plug and
>> > tried to rescrew it upon putting in the new oil, they said that they
>> > had trouble reattaching the plug. They said that it was due to the
>> > threading in the oil pan that hugs the plug is screwed up.
>>
>> > I've noticed slight oil leaks as a result of this. With all this
>> > being said, I will have to get a new oil pan with new gasket, etc.
>> > Can I go aftermarket on this?
>>
>> Very common Honda problem. Is due to ham-fisted mechanics overtorquing
>> the
>> drain bolt.
>>
>> The factory-authorized fix involves the installation of a TimeSert thread
>> repair kit (NOT a "Helicoil"!!!).
>>
>> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
>> give year or model, but this is the kind of thing that often falls under
>> the "unofficial" extended warranty, provided oil changes have been done
>> by
>> Honda/Acura dealers...
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
>
> Or use a Fumoto valve. I have one in my older Civic; no issues
> whatsoever.
>
Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that they
reimbursed me for a dealer installed replacement. That was the LAST time I
stepped foot in a Jiffy Lube.
My second pan was ruined by MY DEALER!! Kudos to them however for owning up
to it after I complained and replacing it at their cost.
Simple solution, new crushable aluminum washer with EACH oil change and
TORQUE the freakin' thing. Places just don't get it.
"gigelus2k3" <popescu.serban@gmail.com> wrote in message
news:1190143751.753587.34600@o80g2000hse.googlegro ups.com...
> On Sep 17, 4:23 pm, Tegger <teg...@tegger.c0m> wrote:
>> "warlock162" <b...@dwsd.org> wrote
>> innews:f07983faee6bd20fd1f255cbf5af2e4b@localhost. talkaboutautos.com:
>>
>> > I just got an oil change on Sept 14, 2007, at 186,041 miles.
>>
>> > When the oil change place (not dealer) unscrewed the oil plug and
>> > tried to rescrew it upon putting in the new oil, they said that they
>> > had trouble reattaching the plug. They said that it was due to the
>> > threading in the oil pan that hugs the plug is screwed up.
>>
>> > I've noticed slight oil leaks as a result of this. With all this
>> > being said, I will have to get a new oil pan with new gasket, etc.
>> > Can I go aftermarket on this?
>>
>> Very common Honda problem. Is due to ham-fisted mechanics overtorquing
>> the
>> drain bolt.
>>
>> The factory-authorized fix involves the installation of a TimeSert thread
>> repair kit (NOT a "Helicoil"!!!).
>>
>> If the TimeSert is unsuccessful, a new oil pan is indicated. You do not
>> give year or model, but this is the kind of thing that often falls under
>> the "unofficial" extended warranty, provided oil changes have been done
>> by
>> Honda/Acura dealers...
>>
>> --
>> Tegger
>>
>> The Unofficial Honda/Acura FAQwww.tegger.com/hondafaq/
>
> Or use a Fumoto valve. I have one in my older Civic; no issues
> whatsoever.
>
09-19-2007, 09:43 AM
#10
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
"Matthew" <thew60_NOSPAM@yahoo.com> wrote in
news:Mg%Hi.334$Sf2.288@newsfe12.lga:
> WOW, Been there, done that TWICE.
> Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that
> they reimbursed me for a dealer installed replacement. That was the
> LAST time I stepped foot in a Jiffy Lube.
>
> My second pan was ruined by MY DEALER!! Kudos to them however for
> owning up to it after I complained and replacing it at their cost.
Mine was ruined by the dealers as well. They paid for a new pan after the
TimeSert thread fix came loose.
>
> Simple solution, new crushable aluminum washer with EACH oil change
> and TORQUE the freakin' thing. Places just don't get it.
I've even found you can short the torque a couple of pounds with no ill
effects. My manual calls for 33 ft lbs, I use 31, just in case the wrench
tolerance is a bit on the high side.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Mg%Hi.334$Sf2.288@newsfe12.lga:
> WOW, Been there, done that TWICE.
> Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that
> they reimbursed me for a dealer installed replacement. That was the
> LAST time I stepped foot in a Jiffy Lube.
>
> My second pan was ruined by MY DEALER!! Kudos to them however for
> owning up to it after I complained and replacing it at their cost.
Mine was ruined by the dealers as well. They paid for a new pan after the
TimeSert thread fix came loose.
>
> Simple solution, new crushable aluminum washer with EACH oil change
> and TORQUE the freakin' thing. Places just don't get it.
I've even found you can short the torque a couple of pounds with no ill
effects. My manual calls for 33 ft lbs, I use 31, just in case the wrench
tolerance is a bit on the high side.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
09-19-2007, 09:43 AM
#11
Guest
Posts: n/a
Re: Oil Pan With Bad Threading
"Matthew" <thew60_NOSPAM@yahoo.com> wrote in
news:Mg%Hi.334$Sf2.288@newsfe12.lga:
> WOW, Been there, done that TWICE.
> Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that
> they reimbursed me for a dealer installed replacement. That was the
> LAST time I stepped foot in a Jiffy Lube.
>
> My second pan was ruined by MY DEALER!! Kudos to them however for
> owning up to it after I complained and replacing it at their cost.
Mine was ruined by the dealers as well. They paid for a new pan after the
TimeSert thread fix came loose.
>
> Simple solution, new crushable aluminum washer with EACH oil change
> and TORQUE the freakin' thing. Places just don't get it.
I've even found you can short the torque a couple of pounds with no ill
effects. My manual calls for 33 ft lbs, I use 31, just in case the wrench
tolerance is a bit on the high side.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Mg%Hi.334$Sf2.288@newsfe12.lga:
> WOW, Been there, done that TWICE.
> Jiffy Lube killed my pan on my 1988 Accord and I bitched enough that
> they reimbursed me for a dealer installed replacement. That was the
> LAST time I stepped foot in a Jiffy Lube.
>
> My second pan was ruined by MY DEALER!! Kudos to them however for
> owning up to it after I complained and replacing it at their cost.
Mine was ruined by the dealers as well. They paid for a new pan after the
TimeSert thread fix came loose.
>
> Simple solution, new crushable aluminum washer with EACH oil change
> and TORQUE the freakin' thing. Places just don't get it.
I've even found you can short the torque a couple of pounds with no ill
effects. My manual calls for 33 ft lbs, I use 31, just in case the wrench
tolerance is a bit on the high side.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
Mike Salazar
Honda Mailing List
2
07-24-2003 04:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
