rebuilding a d16z6
01-09-2007, 09:52 PM
#2
Guest
Posts: n/a
Re: rebuilding a d16z6
mitsurugi3644@hotmail.com wrote:
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
01-09-2007, 09:52 PM
#3
Guest
Posts: n/a
Re: rebuilding a d16z6
mitsurugi3644@hotmail.com wrote:
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
01-09-2007, 09:52 PM
#4
Guest
Posts: n/a
Re: rebuilding a d16z6
mitsurugi3644@hotmail.com wrote:
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
> I'm rebuilding a d16z6 engine and I'm wondering if anyone has a good
> sites that I can by some engine internals from. forged
> pistons-crankshaft-rods ect....... If anyone knows any good sites
> please let me know.
>
the crank and rods are already forged. and you don't want forged
pistons unless you're going turbo or nitrous.
regarding sites, the choices are endless. but you can't go far wrong
starting here:
http://www.theoldone.com/articles/La...rrys_Civic.htm
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
