Removing EGR valve 91 Accord
10-29-2007, 10:57 AM
#1
Guest
Posts: n/a
Removing EGR valve 91 Accord
Folks,
I have a 91 Honda Accord. I am trying to replace the EGR valve and I
notice there are two nuts that need to be removed. Unfortunately the
nuts are on so tight I cannot remove them as it is hard to get the
wrench in there. Is there anyone who has done this before and can tell
me how to get these two nuts out easily. Also what size sockets should
I be using. Thanks.
I have a 91 Honda Accord. I am trying to replace the EGR valve and I
notice there are two nuts that need to be removed. Unfortunately the
nuts are on so tight I cannot remove them as it is hard to get the
wrench in there. Is there anyone who has done this before and can tell
me how to get these two nuts out easily. Also what size sockets should
I be using. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
qwest news
Honda Mailing List
0
07-30-2004 06:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
