Rotors
05-07-2004, 12:11 PM
#16
Guest
Posts: n/a
Re: Rotors
I just take the wheel off, and use a hammer to knock the corrosion off
the outer edge. Rotors are still the original ones on my Accord (92)
with 215,000 miles on it. bob
Eric wrote:
>
> George Pennington wrote:
> >
> > Did they ever suggest resurfacing the rotors? The rusty outer edge you
> > describe is normal. Even if there was a problem with the rotors they can
> > be resurfaced before they are repalced those rotors are 22mm thick and
> > can be turned down to 19mm(doesn't sound like much but it might as well
> > be a mile.) my recommendation is take your car to another honda dealer
> > and tell them what you were told. They will most likely shake thier
> > heads in disbelief.
>
> Better yet, the original poster should make an official complaint to Honda
> Motor Company Customer Service...
>
> American Honda Motor Co., Inc.
> Honda Automobile Customer Service
> 1919 Torrance Boulevard
> Mail Stop: 500 - 2N - 7D
> Torrance, CA 90501-2746
>
> http://www.hondacars.com/info/customer_relations.asp
the outer edge. Rotors are still the original ones on my Accord (92)
with 215,000 miles on it. bob
Eric wrote:
>
> George Pennington wrote:
> >
> > Did they ever suggest resurfacing the rotors? The rusty outer edge you
> > describe is normal. Even if there was a problem with the rotors they can
> > be resurfaced before they are repalced those rotors are 22mm thick and
> > can be turned down to 19mm(doesn't sound like much but it might as well
> > be a mile.) my recommendation is take your car to another honda dealer
> > and tell them what you were told. They will most likely shake thier
> > heads in disbelief.
>
> Better yet, the original poster should make an official complaint to Honda
> Motor Company Customer Service...
>
> American Honda Motor Co., Inc.
> Honda Automobile Customer Service
> 1919 Torrance Boulevard
> Mail Stop: 500 - 2N - 7D
> Torrance, CA 90501-2746
>
> http://www.hondacars.com/info/customer_relations.asp
05-07-2004, 12:48 PM
#17
Guest
Posts: n/a
Re: Rotors
"Eric" <say.no@spam.now> wrote in message news:4099E98A.31E88FAD@spam.now...
> George Pennington wrote:
> >
> > Did they ever suggest resurfacing the rotors? The rusty outer edge you
> > describe is normal. Even if there was a problem with the rotors they
can
> > be resurfaced before they are repalced those rotors are 22mm thick and
> > can be turned down to 19mm(doesn't sound like much but it might as well
> > be a mile.) my recommendation is take your car to another honda dealer
> > and tell them what you were told. They will most likely shake thier
> > heads in disbelief.
>
> Better yet, the original poster should make an official complaint to Honda
> Motor Company Customer Service...
>
> American Honda Motor Co., Inc.
> Honda Automobile Customer Service
> 1919 Torrance Boulevard
> Mail Stop: 500 - 2N - 7D
> Torrance, CA 90501-2746
> http://www.hondacars.com/info/customer_relations.asp
Beauty idea. in case youd rather call thier phone is:
1-800-999-1009 8am-5pm PST
Thread
Thread Starter
Forum
Replies
Last Post
BLUE-TYPE-R
Car Parts For Sale
0
03-12-2005 12:45 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)