I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
diagnosing alot of things, there are self tests on the computers that we get
alot of info on. the srs system is one of those complex systems in which we
love using our tools on, its easy and efficient. a person risks damaging an
srs system trying to diagnose systems themselves. a person might even set
off an airbag. take it to the dealer. leave it to the pros.
"jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> Lex wrote:
> >
> > the easiest way is to let the dealer reset it with a pgm
> > "jim" <jim@noname.com> wrote in message news:40478CC0.4671@noname.com...
> > > Woody wrote:
> > > >
> > > > If you wait a while it will probably reset itself if there are no
> > faults.
> > > > Most reset after a few drive cycles...
> > > >
> > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > jim wrote:
> > > > > > self reg test 12 wrote:
> > > > > >>
> > > > > >> I removed the passenger seat to haul some long tables and after
> > > > > >> reinstalling and reconnecting all of the wiring, the SRS light
> > stays
> > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > >>
> > > > > >> --
> > > > > >>
> > > > > >> Chris
> > > > > > hey check out this, found it on the www.yahoo.com and did a
search
> > > > > > on SRS light, honda and came up with this... hope it helps... i
have
> > > > > > the same problem with a 2001 civic and got alot of sites with
info
> > on
> > > > > > how to reset it... the best one is on www.superhonda.com where
it
> > > > > > shows you the pictures, i could not locat the thing under my
dash,
> > > > > > kinda old and could not bend that far down to get under
there(bad
> > > > > > back) oh well will get some kid to climb under there and check
it
> > out
> > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > >
> > > > > --
> > > > >
> > > > > Thanks, Jim. This looks like a winner. Pasting for others to
use:
> > > > >
> > > > >
> > > > > Directions for erasing memory on SRS light
> > > > > 1st you need to either buy or make the "SCS Service Connector." I
used
> > a
> > > > > speaker harness for and older Honda which you can buy at a local
> > stereo
> > > > shop
> > > > > such as Circuit City or Best Buy, and cut the wires and looped
them
> > > > > together. You can also use a paperclip but that will make it a
little
> > more
> > > > > difficult because you have to connect it and disconnect it a few
times
> > > > > quickly.
> > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > >
> > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
it
> > that
> > > > is
> > > > > plugged into the fuse box, unplug it and pull it down. Once you
have
> > done
> > > > > that you can begin the process of erasing the memory. NOTE: This
will
> > only
> > > > > reset your SRS System if what caused it to trigger has been fixed,
Ex:
> > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > pulling
> > > > > your seat out.
> > > > >
> > > > > 1st step in erasing the memory is to turn the ignition off and
connect
> > the
> > > > > SCS Service connector to the MES Plug,
> > > > >
> > > > > 2nd Turn Ignition on. SRS indicator light will come on for about 6
> > seconds
> > > > > then go off.
> > > > >
> > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > seconds
> > > > > after SRS indicator light goes off. SRS indicator light will come
on
> > > > again.
> > > > >
> > > > > 4th Reconnect SCS service connector the MES connector within 4
seconds
> > > > after
> > > > > SRS light comes on. SRS indicator light will go off.
> > > > >
> > > > > 5th Disconnect SCS service connector from MES connector within 4
> > seconds.
> > > > > SRS indicator light will indicate that memory is erased by
blinking 2
> > > > times.
> > > > >
> > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
normal
> > and
> > > > > light should come on and go out like normal. You have reset your
SRS
> > > > light,
> > > > > congrats.
> > > > >
> > > > > If it does not work the first time try it again, the timing has to
be
> > > > > perfect. My first time it took me 3 attempts before it worked, but
it
> > did
> > > > > work.
> > > > >
> > > > >
> > > gee the info i received from the honda dealer and from the internet is
> > > that you have to reset it to get the light to go out... unless the
bulb
> > > burns out....
> just about any question on this newsgroup could use an answer like that:
> the easiest way is to let the dealer do it????
> bet it is a pat answer for just about any newsgroup dealing with cars..
> bet you can even give advise on doing home repair, etc. by saying call a
> contractor....
> pretty goo answer...
> thanks for the info...

 

I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
diagnosing alot of things, there are self tests on the computers that we get
alot of info on. the srs system is one of those complex systems in which we
love using our tools on, its easy and efficient. a person risks damaging an
srs system trying to diagnose systems themselves. a person might even set
off an airbag. take it to the dealer. leave it to the pros.
"jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> Lex wrote:
> >
> > the easiest way is to let the dealer reset it with a pgm
> > "jim" <jim@noname.com> wrote in message news:40478CC0.4671@noname.com...
> > > Woody wrote:
> > > >
> > > > If you wait a while it will probably reset itself if there are no
> > faults.
> > > > Most reset after a few drive cycles...
> > > >
> > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > jim wrote:
> > > > > > self reg test 12 wrote:
> > > > > >>
> > > > > >> I removed the passenger seat to haul some long tables and after
> > > > > >> reinstalling and reconnecting all of the wiring, the SRS light
> > stays
> > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > >>
> > > > > >> --
> > > > > >>
> > > > > >> Chris
> > > > > > hey check out this, found it on the www.yahoo.com and did a
search
> > > > > > on SRS light, honda and came up with this... hope it helps... i
have
> > > > > > the same problem with a 2001 civic and got alot of sites with
info
> > on
> > > > > > how to reset it... the best one is on www.superhonda.com where
it
> > > > > > shows you the pictures, i could not locat the thing under my
dash,
> > > > > > kinda old and could not bend that far down to get under
there(bad
> > > > > > back) oh well will get some kid to climb under there and check
it
> > out
> > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > >
> > > > > --
> > > > >
> > > > > Thanks, Jim. This looks like a winner. Pasting for others to
use:
> > > > >
> > > > >
> > > > > Directions for erasing memory on SRS light
> > > > > 1st you need to either buy or make the "SCS Service Connector." I
used
> > a
> > > > > speaker harness for and older Honda which you can buy at a local
> > stereo
> > > > shop
> > > > > such as Circuit City or Best Buy, and cut the wires and looped
them
> > > > > together. You can also use a paperclip but that will make it a
little
> > more
> > > > > difficult because you have to connect it and disconnect it a few
times
> > > > > quickly.
> > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > >
> > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
it
> > that
> > > > is
> > > > > plugged into the fuse box, unplug it and pull it down. Once you
have
> > done
> > > > > that you can begin the process of erasing the memory. NOTE: This
will
> > only
> > > > > reset your SRS System if what caused it to trigger has been fixed,
Ex:
> > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > pulling
> > > > > your seat out.
> > > > >
> > > > > 1st step in erasing the memory is to turn the ignition off and
connect
> > the
> > > > > SCS Service connector to the MES Plug,
> > > > >
> > > > > 2nd Turn Ignition on. SRS indicator light will come on for about 6
> > seconds
> > > > > then go off.
> > > > >
> > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > seconds
> > > > > after SRS indicator light goes off. SRS indicator light will come
on
> > > > again.
> > > > >
> > > > > 4th Reconnect SCS service connector the MES connector within 4
seconds
> > > > after
> > > > > SRS light comes on. SRS indicator light will go off.
> > > > >
> > > > > 5th Disconnect SCS service connector from MES connector within 4
> > seconds.
> > > > > SRS indicator light will indicate that memory is erased by
blinking 2
> > > > times.
> > > > >
> > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
normal
> > and
> > > > > light should come on and go out like normal. You have reset your
SRS
> > > > light,
> > > > > congrats.
> > > > >
> > > > > If it does not work the first time try it again, the timing has to
be
> > > > > perfect. My first time it took me 3 attempts before it worked, but
it
> > did
> > > > > work.
> > > > >
> > > > >
> > > gee the info i received from the honda dealer and from the internet is
> > > that you have to reset it to get the light to go out... unless the
bulb
> > > burns out....
> just about any question on this newsgroup could use an answer like that:
> the easiest way is to let the dealer do it????
> bet it is a pat answer for just about any newsgroup dealing with cars..
> bet you can even give advise on doing home repair, etc. by saying call a
> contractor....
> pretty goo answer...
> thanks for the info...

 

I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
diagnosing alot of things, there are self tests on the computers that we get
alot of info on. the srs system is one of those complex systems in which we
love using our tools on, its easy and efficient. a person risks damaging an
srs system trying to diagnose systems themselves. a person might even set
off an airbag. take it to the dealer. leave it to the pros.
"jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> Lex wrote:
> >
> > the easiest way is to let the dealer reset it with a pgm
> > "jim" <jim@noname.com> wrote in message news:40478CC0.4671@noname.com...
> > > Woody wrote:
> > > >
> > > > If you wait a while it will probably reset itself if there are no
> > faults.
> > > > Most reset after a few drive cycles...
> > > >
> > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > jim wrote:
> > > > > > self reg test 12 wrote:
> > > > > >>
> > > > > >> I removed the passenger seat to haul some long tables and after
> > > > > >> reinstalling and reconnecting all of the wiring, the SRS light
> > stays
> > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > >>
> > > > > >> --
> > > > > >>
> > > > > >> Chris
> > > > > > hey check out this, found it on the www.yahoo.com and did a
search
> > > > > > on SRS light, honda and came up with this... hope it helps... i
have
> > > > > > the same problem with a 2001 civic and got alot of sites with
info
> > on
> > > > > > how to reset it... the best one is on www.superhonda.com where
it
> > > > > > shows you the pictures, i could not locat the thing under my
dash,
> > > > > > kinda old and could not bend that far down to get under
there(bad
> > > > > > back) oh well will get some kid to climb under there and check
it
> > out
> > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > >
> > > > > --
> > > > >
> > > > > Thanks, Jim. This looks like a winner. Pasting for others to
use:
> > > > >
> > > > >
> > > > > Directions for erasing memory on SRS light
> > > > > 1st you need to either buy or make the "SCS Service Connector." I
used
> > a
> > > > > speaker harness for and older Honda which you can buy at a local
> > stereo
> > > > shop
> > > > > such as Circuit City or Best Buy, and cut the wires and looped
them
> > > > > together. You can also use a paperclip but that will make it a
little
> > more
> > > > > difficult because you have to connect it and disconnect it a few
times
> > > > > quickly.
> > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > >
> > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
it
> > that
> > > > is
> > > > > plugged into the fuse box, unplug it and pull it down. Once you
have
> > done
> > > > > that you can begin the process of erasing the memory. NOTE: This
will
> > only
> > > > > reset your SRS System if what caused it to trigger has been fixed,
Ex:
> > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > pulling
> > > > > your seat out.
> > > > >
> > > > > 1st step in erasing the memory is to turn the ignition off and
connect
> > the
> > > > > SCS Service connector to the MES Plug,
> > > > >
> > > > > 2nd Turn Ignition on. SRS indicator light will come on for about 6
> > seconds
> > > > > then go off.
> > > > >
> > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > seconds
> > > > > after SRS indicator light goes off. SRS indicator light will come
on
> > > > again.
> > > > >
> > > > > 4th Reconnect SCS service connector the MES connector within 4
seconds
> > > > after
> > > > > SRS light comes on. SRS indicator light will go off.
> > > > >
> > > > > 5th Disconnect SCS service connector from MES connector within 4
> > seconds.
> > > > > SRS indicator light will indicate that memory is erased by
blinking 2
> > > > times.
> > > > >
> > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
normal
> > and
> > > > > light should come on and go out like normal. You have reset your
SRS
> > > > light,
> > > > > congrats.
> > > > >
> > > > > If it does not work the first time try it again, the timing has to
be
> > > > > perfect. My first time it took me 3 attempts before it worked, but
it
> > did
> > > > > work.
> > > > >
> > > > >
> > > gee the info i received from the honda dealer and from the internet is
> > > that you have to reset it to get the light to go out... unless the
bulb
> > > burns out....
> just about any question on this newsgroup could use an answer like that:
> the easiest way is to let the dealer do it????
> bet it is a pat answer for just about any newsgroup dealing with cars..
> bet you can even give advise on doing home repair, etc. by saying call a
> contractor....
> pretty goo answer...
> thanks for the info...

 

If your professional dealer opinion is that inserting a paperclip into a
diagnostic harness might set off an airbag, then I certainly wouldn't want
you working anywhere near my car.

"Lex" <aacevedo4@elp.rr.com> wrote in message
news:YYy2c.53565$lS1.6329@fe2.texas.rr.com...
> I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
> diagnosing alot of things, there are self tests on the computers that we
get
> alot of info on. the srs system is one of those complex systems in which
we
> love using our tools on, its easy and efficient. a person risks damaging
an
> srs system trying to diagnose systems themselves. a person might even set
> off an airbag. take it to the dealer. leave it to the pros.
> "jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> > Lex wrote:
> > >
> > > the easiest way is to let the dealer reset it with a pgm
> > > "jim" <jim@noname.com> wrote in message
news:40478CC0.4671@noname.com...
> > > > Woody wrote:
> > > > >
> > > > > If you wait a while it will probably reset itself if there are no
> > > faults.
> > > > > Most reset after a few drive cycles...
> > > > >
> > > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > > jim wrote:
> > > > > > > self reg test 12 wrote:
> > > > > > >>
> > > > > > >> I removed the passenger seat to haul some long tables and
after
> > > > > > >> reinstalling and reconnecting all of the wiring, the SRS
light
> > > stays
> > > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > > >>
> > > > > > >> --
> > > > > > >>
> > > > > > >> Chris
> > > > > > > hey check out this, found it on the www.yahoo.com and did a
> search
> > > > > > > on SRS light, honda and came up with this... hope it helps...
i
> have
> > > > > > > the same problem with a 2001 civic and got alot of sites with
> info
> > > on
> > > > > > > how to reset it... the best one is on www.superhonda.com where
> it
> > > > > > > shows you the pictures, i could not locat the thing under my
> dash,
> > > > > > > kinda old and could not bend that far down to get under
> there(bad
> > > > > > > back) oh well will get some kid to climb under there and check
> it
> > > out
> > > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > > >
> > > > > > --
> > > > > >
> > > > > > Thanks, Jim. This looks like a winner. Pasting for others to
> use:
> > > > > >
> > > > > >
> > > > > > Directions for erasing memory on SRS light
> > > > > > 1st you need to either buy or make the "SCS Service Connector."
I
> used
> > > a
> > > > > > speaker harness for and older Honda which you can buy at a local
> > > stereo
> > > > > shop
> > > > > > such as Circuit City or Best Buy, and cut the wires and looped
> them
> > > > > > together. You can also use a paperclip but that will make it a
> little
> > > more
> > > > > > difficult because you have to connect it and disconnect it a few
> times
> > > > > > quickly.
> > > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > > >
> > > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
> it
> > > that
> > > > > is
> > > > > > plugged into the fuse box, unplug it and pull it down. Once you
> have
> > > done
> > > > > > that you can begin the process of erasing the memory. NOTE: This
> will
> > > only
> > > > > > reset your SRS System if what caused it to trigger has been
fixed,
> Ex:
> > > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > > pulling
> > > > > > your seat out.
> > > > > >
> > > > > > 1st step in erasing the memory is to turn the ignition off and
> connect
> > > the
> > > > > > SCS Service connector to the MES Plug,
> > > > > >
> > > > > > 2nd Turn Ignition on. SRS indicator light will come on for about
6
> > > seconds
> > > > > > then go off.
> > > > > >
> > > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > > seconds
> > > > > > after SRS indicator light goes off. SRS indicator light will
come
> on
> > > > > again.
> > > > > >
> > > > > > 4th Reconnect SCS service connector the MES connector within 4
> seconds
> > > > > after
> > > > > > SRS light comes on. SRS indicator light will go off.
> > > > > >
> > > > > > 5th Disconnect SCS service connector from MES connector within 4
> > > seconds.
> > > > > > SRS indicator light will indicate that memory is erased by
> blinking 2
> > > > > times.
> > > > > >
> > > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
> normal
> > > and
> > > > > > light should come on and go out like normal. You have reset your
> SRS
> > > > > light,
> > > > > > congrats.
> > > > > >
> > > > > > If it does not work the first time try it again, the timing has
to
> be
> > > > > > perfect. My first time it took me 3 attempts before it worked,
but
> it
> > > did
> > > > > > work.
> > > > > >
> > > > > >
> > > > gee the info i received from the honda dealer and from the internet
is
> > > > that you have to reset it to get the light to go out... unless the
> bulb
> > > > burns out....
> > just about any question on this newsgroup could use an answer like that:
> > the easiest way is to let the dealer do it????
> > bet it is a pat answer for just about any newsgroup dealing with cars..
> > bet you can even give advise on doing home repair, etc. by saying call a
> > contractor....
> > pretty goo answer...
> > thanks for the info...
>
>

 

If your professional dealer opinion is that inserting a paperclip into a
diagnostic harness might set off an airbag, then I certainly wouldn't want
you working anywhere near my car.

"Lex" <aacevedo4@elp.rr.com> wrote in message
news:YYy2c.53565$lS1.6329@fe2.texas.rr.com...
> I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
> diagnosing alot of things, there are self tests on the computers that we
get
> alot of info on. the srs system is one of those complex systems in which
we
> love using our tools on, its easy and efficient. a person risks damaging
an
> srs system trying to diagnose systems themselves. a person might even set
> off an airbag. take it to the dealer. leave it to the pros.
> "jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> > Lex wrote:
> > >
> > > the easiest way is to let the dealer reset it with a pgm
> > > "jim" <jim@noname.com> wrote in message
news:40478CC0.4671@noname.com...
> > > > Woody wrote:
> > > > >
> > > > > If you wait a while it will probably reset itself if there are no
> > > faults.
> > > > > Most reset after a few drive cycles...
> > > > >
> > > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > > jim wrote:
> > > > > > > self reg test 12 wrote:
> > > > > > >>
> > > > > > >> I removed the passenger seat to haul some long tables and
after
> > > > > > >> reinstalling and reconnecting all of the wiring, the SRS
light
> > > stays
> > > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > > >>
> > > > > > >> --
> > > > > > >>
> > > > > > >> Chris
> > > > > > > hey check out this, found it on the www.yahoo.com and did a
> search
> > > > > > > on SRS light, honda and came up with this... hope it helps...
i
> have
> > > > > > > the same problem with a 2001 civic and got alot of sites with
> info
> > > on
> > > > > > > how to reset it... the best one is on www.superhonda.com where
> it
> > > > > > > shows you the pictures, i could not locat the thing under my
> dash,
> > > > > > > kinda old and could not bend that far down to get under
> there(bad
> > > > > > > back) oh well will get some kid to climb under there and check
> it
> > > out
> > > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > > >
> > > > > > --
> > > > > >
> > > > > > Thanks, Jim. This looks like a winner. Pasting for others to
> use:
> > > > > >
> > > > > >
> > > > > > Directions for erasing memory on SRS light
> > > > > > 1st you need to either buy or make the "SCS Service Connector."
I
> used
> > > a
> > > > > > speaker harness for and older Honda which you can buy at a local
> > > stereo
> > > > > shop
> > > > > > such as Circuit City or Best Buy, and cut the wires and looped
> them
> > > > > > together. You can also use a paperclip but that will make it a
> little
> > > more
> > > > > > difficult because you have to connect it and disconnect it a few
> times
> > > > > > quickly.
> > > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > > >
> > > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
> it
> > > that
> > > > > is
> > > > > > plugged into the fuse box, unplug it and pull it down. Once you
> have
> > > done
> > > > > > that you can begin the process of erasing the memory. NOTE: This
> will
> > > only
> > > > > > reset your SRS System if what caused it to trigger has been
fixed,
> Ex:
> > > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > > pulling
> > > > > > your seat out.
> > > > > >
> > > > > > 1st step in erasing the memory is to turn the ignition off and
> connect
> > > the
> > > > > > SCS Service connector to the MES Plug,
> > > > > >
> > > > > > 2nd Turn Ignition on. SRS indicator light will come on for about
6
> > > seconds
> > > > > > then go off.
> > > > > >
> > > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > > seconds
> > > > > > after SRS indicator light goes off. SRS indicator light will
come
> on
> > > > > again.
> > > > > >
> > > > > > 4th Reconnect SCS service connector the MES connector within 4
> seconds
> > > > > after
> > > > > > SRS light comes on. SRS indicator light will go off.
> > > > > >
> > > > > > 5th Disconnect SCS service connector from MES connector within 4
> > > seconds.
> > > > > > SRS indicator light will indicate that memory is erased by
> blinking 2
> > > > > times.
> > > > > >
> > > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
> normal
> > > and
> > > > > > light should come on and go out like normal. You have reset your
> SRS
> > > > > light,
> > > > > > congrats.
> > > > > >
> > > > > > If it does not work the first time try it again, the timing has
to
> be
> > > > > > perfect. My first time it took me 3 attempts before it worked,
but
> it
> > > did
> > > > > > work.
> > > > > >
> > > > > >
> > > > gee the info i received from the honda dealer and from the internet
is
> > > > that you have to reset it to get the light to go out... unless the
> bulb
> > > > burns out....
> > just about any question on this newsgroup could use an answer like that:
> > the easiest way is to let the dealer do it????
> > bet it is a pat answer for just about any newsgroup dealing with cars..
> > bet you can even give advise on doing home repair, etc. by saying call a
> > contractor....
> > pretty goo answer...
> > thanks for the info...
>
>

 

If your professional dealer opinion is that inserting a paperclip into a
diagnostic harness might set off an airbag, then I certainly wouldn't want
you working anywhere near my car.

"Lex" <aacevedo4@elp.rr.com> wrote in message
news:YYy2c.53565$lS1.6329@fe2.texas.rr.com...
> I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
> diagnosing alot of things, there are self tests on the computers that we
get
> alot of info on. the srs system is one of those complex systems in which
we
> love using our tools on, its easy and efficient. a person risks damaging
an
> srs system trying to diagnose systems themselves. a person might even set
> off an airbag. take it to the dealer. leave it to the pros.
> "jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> > Lex wrote:
> > >
> > > the easiest way is to let the dealer reset it with a pgm
> > > "jim" <jim@noname.com> wrote in message
news:40478CC0.4671@noname.com...
> > > > Woody wrote:
> > > > >
> > > > > If you wait a while it will probably reset itself if there are no
> > > faults.
> > > > > Most reset after a few drive cycles...
> > > > >
> > > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > > jim wrote:
> > > > > > > self reg test 12 wrote:
> > > > > > >>
> > > > > > >> I removed the passenger seat to haul some long tables and
after
> > > > > > >> reinstalling and reconnecting all of the wiring, the SRS
light
> > > stays
> > > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > > >>
> > > > > > >> --
> > > > > > >>
> > > > > > >> Chris
> > > > > > > hey check out this, found it on the www.yahoo.com and did a
> search
> > > > > > > on SRS light, honda and came up with this... hope it helps...
i
> have
> > > > > > > the same problem with a 2001 civic and got alot of sites with
> info
> > > on
> > > > > > > how to reset it... the best one is on www.superhonda.com where
> it
> > > > > > > shows you the pictures, i could not locat the thing under my
> dash,
> > > > > > > kinda old and could not bend that far down to get under
> there(bad
> > > > > > > back) oh well will get some kid to climb under there and check
> it
> > > out
> > > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > > >
> > > > > > --
> > > > > >
> > > > > > Thanks, Jim. This looks like a winner. Pasting for others to
> use:
> > > > > >
> > > > > >
> > > > > > Directions for erasing memory on SRS light
> > > > > > 1st you need to either buy or make the "SCS Service Connector."
I
> used
> > > a
> > > > > > speaker harness for and older Honda which you can buy at a local
> > > stereo
> > > > > shop
> > > > > > such as Circuit City or Best Buy, and cut the wires and looped
> them
> > > > > > together. You can also use a paperclip but that will make it a
> little
> > > more
> > > > > > difficult because you have to connect it and disconnect it a few
> times
> > > > > > quickly.
> > > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > > >
> > > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
> it
> > > that
> > > > > is
> > > > > > plugged into the fuse box, unplug it and pull it down. Once you
> have
> > > done
> > > > > > that you can begin the process of erasing the memory. NOTE: This
> will
> > > only
> > > > > > reset your SRS System if what caused it to trigger has been
fixed,
> Ex:
> > > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > > pulling
> > > > > > your seat out.
> > > > > >
> > > > > > 1st step in erasing the memory is to turn the ignition off and
> connect
> > > the
> > > > > > SCS Service connector to the MES Plug,
> > > > > >
> > > > > > 2nd Turn Ignition on. SRS indicator light will come on for about
6
> > > seconds
> > > > > > then go off.
> > > > > >
> > > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > > seconds
> > > > > > after SRS indicator light goes off. SRS indicator light will
come
> on
> > > > > again.
> > > > > >
> > > > > > 4th Reconnect SCS service connector the MES connector within 4
> seconds
> > > > > after
> > > > > > SRS light comes on. SRS indicator light will go off.
> > > > > >
> > > > > > 5th Disconnect SCS service connector from MES connector within 4
> > > seconds.
> > > > > > SRS indicator light will indicate that memory is erased by
> blinking 2
> > > > > times.
> > > > > >
> > > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
> normal
> > > and
> > > > > > light should come on and go out like normal. You have reset your
> SRS
> > > > > light,
> > > > > > congrats.
> > > > > >
> > > > > > If it does not work the first time try it again, the timing has
to
> be
> > > > > > perfect. My first time it took me 3 attempts before it worked,
but
> it
> > > did
> > > > > > work.
> > > > > >
> > > > > >
> > > > gee the info i received from the honda dealer and from the internet
is
> > > > that you have to reset it to get the light to go out... unless the
> bulb
> > > > burns out....
> > just about any question on this newsgroup could use an answer like that:
> > the easiest way is to let the dealer do it????
> > bet it is a pat answer for just about any newsgroup dealing with cars..
> > bet you can even give advise on doing home repair, etc. by saying call a
> > contractor....
> > pretty goo answer...
> > thanks for the info...
>
>

 

If your professional dealer opinion is that inserting a paperclip into a
diagnostic harness might set off an airbag, then I certainly wouldn't want
you working anywhere near my car.

"Lex" <aacevedo4@elp.rr.com> wrote in message
news:YYy2c.53565$lS1.6329@fe2.texas.rr.com...
> I work at a Honda dealership in el Paso TX. we use a pgm or the hdt for
> diagnosing alot of things, there are self tests on the computers that we
get
> alot of info on. the srs system is one of those complex systems in which
we
> love using our tools on, its easy and efficient. a person risks damaging
an
> srs system trying to diagnose systems themselves. a person might even set
> off an airbag. take it to the dealer. leave it to the pros.
> "jim" <jim@noname.com> wrote in message news:40487E18.1CD7@noname.com...
> > Lex wrote:
> > >
> > > the easiest way is to let the dealer reset it with a pgm
> > > "jim" <jim@noname.com> wrote in message
news:40478CC0.4671@noname.com...
> > > > Woody wrote:
> > > > >
> > > > > If you wait a while it will probably reset itself if there are no
> > > faults.
> > > > > Most reset after a few drive cycles...
> > > > >
> > > > > "self reg test 12" <cbwucvuwbu@***.net> wrote in message
> > > > > news:s9z1c.27902$qL1.21743@fed1read02...
> > > > > > jim wrote:
> > > > > > > self reg test 12 wrote:
> > > > > > >>
> > > > > > >> I removed the passenger seat to haul some long tables and
after
> > > > > > >> reinstalling and reconnecting all of the wiring, the SRS
light
> > > stays
> > > > > > >> lit on the dash. Is there a reset switch or button?
> > > > > > >>
> > > > > > >> --
> > > > > > >>
> > > > > > >> Chris
> > > > > > > hey check out this, found it on the www.yahoo.com and did a
> search
> > > > > > > on SRS light, honda and came up with this... hope it helps...
i
> have
> > > > > > > the same problem with a 2001 civic and got alot of sites with
> info
> > > on
> > > > > > > how to reset it... the best one is on www.superhonda.com where
> it
> > > > > > > shows you the pictures, i could not locat the thing under my
> dash,
> > > > > > > kinda old and could not bend that far down to get under
> there(bad
> > > > > > > back) oh well will get some kid to climb under there and check
> it
> > > out
> > > > > > > of me... http://www.honda-tech.com/zerothread?id=264288
> > > > > >
> > > > > > --
> > > > > >
> > > > > > Thanks, Jim. This looks like a winner. Pasting for others to
> use:
> > > > > >
> > > > > >
> > > > > > Directions for erasing memory on SRS light
> > > > > > 1st you need to either buy or make the "SCS Service Connector."
I
> used
> > > a
> > > > > > speaker harness for and older Honda which you can buy at a local
> > > stereo
> > > > > shop
> > > > > > such as Circuit City or Best Buy, and cut the wires and looped
> them
> > > > > > together. You can also use a paperclip but that will make it a
> little
> > > more
> > > > > > difficult because you have to connect it and disconnect it a few
> times
> > > > > > quickly.
> > > > > > 2nd you need to find the MES (Memory Erase Signal) connector
> > > > > >
> > > > > > MES Plug in Fuse box. It is a yellow connector with two wires in
> it
> > > that
> > > > > is
> > > > > > plugged into the fuse box, unplug it and pull it down. Once you
> have
> > > done
> > > > > > that you can begin the process of erasing the memory. NOTE: This
> will
> > > only
> > > > > > reset your SRS System if what caused it to trigger has been
fixed,
> Ex:
> > > > > > turning the ignition on with any SRS Plugs disconnected, such as
> > > pulling
> > > > > > your seat out.
> > > > > >
> > > > > > 1st step in erasing the memory is to turn the ignition off and
> connect
> > > the
> > > > > > SCS Service connector to the MES Plug,
> > > > > >
> > > > > > 2nd Turn Ignition on. SRS indicator light will come on for about
6
> > > seconds
> > > > > > then go off.
> > > > > >
> > > > > > 3rd Disconnect SCS service connector for MES connector within 4
> > > seconds
> > > > > > after SRS indicator light goes off. SRS indicator light will
come
> on
> > > > > again.
> > > > > >
> > > > > > 4th Reconnect SCS service connector the MES connector within 4
> seconds
> > > > > after
> > > > > > SRS light comes on. SRS indicator light will go off.
> > > > > >
> > > > > > 5th Disconnect SCS service connector from MES connector within 4
> > > seconds.
> > > > > > SRS indicator light will indicate that memory is erased by
> blinking 2
> > > > > times.
> > > > > >
> > > > > > 6th Turn ignition off, and wait 10 seconds. Start vehicle like
> normal
> > > and
> > > > > > light should come on and go out like normal. You have reset your
> SRS
> > > > > light,
> > > > > > congrats.
> > > > > >
> > > > > > If it does not work the first time try it again, the timing has
to
> be
> > > > > > perfect. My first time it took me 3 attempts before it worked,
but
> it
> > > did
> > > > > > work.
> > > > > >
> > > > > >
> > > > gee the info i received from the honda dealer and from the internet
is
> > > > that you have to reset it to get the light to go out... unless the
> bulb
> > > > burns out....
> > just about any question on this newsgroup could use an answer like that:
> > the easiest way is to let the dealer do it????
> > bet it is a pat answer for just about any newsgroup dealing with cars..
> > bet you can even give advise on doing home repair, etc. by saying call a
> > contractor....
> > pretty goo answer...
> > thanks for the info...
>
>