Swapping out brake bleeder screws
Guest
Posts: n/a
Swapping out brake bleeder screws
Hi All,
I finally got speedbleeders for my Si of which I plan on installing with
fresh brake fluid this weekend. My question is can I replace each screw and
bleed it one corner at a time in one step or do I need to replace all 4
bleed screws and go back and bleed them again. I'm wondering if totally
removing/replacing the 2nd screw in a single L/R channel blows the bleed for
the 1st in the same channel. Hopefully this makes sense. Thanks!
I finally got speedbleeders for my Si of which I plan on installing with
fresh brake fluid this weekend. My question is can I replace each screw and
bleed it one corner at a time in one step or do I need to replace all 4
bleed screws and go back and bleed them again. I'm wondering if totally
removing/replacing the 2nd screw in a single L/R channel blows the bleed for
the 1st in the same channel. Hopefully this makes sense. Thanks!
Guest
Posts: n/a
Re: Swapping out brake bleeder screws
Fill the master cylinder, start at the wheel furthest from the master
cylinder, replace bleeders one at a time, then go back and bleed furthest
from the master cylinder, working your way to the master cylinder,keeping an
eye on the fluid level, this is how I would do it.
Tom
"MAT" <marcoat*RM_@SPAM_*hotmail.com> wrote in message
news:2ZWdnRkFaMyLP2bfRVn-rw@comcast.com...
> Hi All,
>
> I finally got speedbleeders for my Si of which I plan on installing with
> fresh brake fluid this weekend. My question is can I replace each screw
> and bleed it one corner at a time in one step or do I need to replace all
> 4 bleed screws and go back and bleed them again. I'm wondering if totally
> removing/replacing the 2nd screw in a single L/R channel blows the bleed
> for the 1st in the same channel. Hopefully this makes sense. Thanks!
>
>
>
cylinder, replace bleeders one at a time, then go back and bleed furthest
from the master cylinder, working your way to the master cylinder,keeping an
eye on the fluid level, this is how I would do it.
Tom
"MAT" <marcoat*RM_@SPAM_*hotmail.com> wrote in message
news:2ZWdnRkFaMyLP2bfRVn-rw@comcast.com...
> Hi All,
>
> I finally got speedbleeders for my Si of which I plan on installing with
> fresh brake fluid this weekend. My question is can I replace each screw
> and bleed it one corner at a time in one step or do I need to replace all
> 4 bleed screws and go back and bleed them again. I'm wondering if totally
> removing/replacing the 2nd screw in a single L/R channel blows the bleed
> for the 1st in the same channel. Hopefully this makes sense. Thanks!
>
>
>
Guest
Posts: n/a
Re: Swapping out brake bleeder screws
Fill the master cylinder, start at the wheel furthest from the master
cylinder, replace bleeders one at a time, then go back and bleed furthest
from the master cylinder, working your way to the master cylinder,keeping an
eye on the fluid level, this is how I would do it.
Tom
"MAT" <marcoat*RM_@SPAM_*hotmail.com> wrote in message
news:2ZWdnRkFaMyLP2bfRVn-rw@comcast.com...
> Hi All,
>
> I finally got speedbleeders for my Si of which I plan on installing with
> fresh brake fluid this weekend. My question is can I replace each screw
> and bleed it one corner at a time in one step or do I need to replace all
> 4 bleed screws and go back and bleed them again. I'm wondering if totally
> removing/replacing the 2nd screw in a single L/R channel blows the bleed
> for the 1st in the same channel. Hopefully this makes sense. Thanks!
>
>
>
cylinder, replace bleeders one at a time, then go back and bleed furthest
from the master cylinder, working your way to the master cylinder,keeping an
eye on the fluid level, this is how I would do it.
Tom
"MAT" <marcoat*RM_@SPAM_*hotmail.com> wrote in message
news:2ZWdnRkFaMyLP2bfRVn-rw@comcast.com...
> Hi All,
>
> I finally got speedbleeders for my Si of which I plan on installing with
> fresh brake fluid this weekend. My question is can I replace each screw
> and bleed it one corner at a time in one step or do I need to replace all
> 4 bleed screws and go back and bleed them again. I'm wondering if totally
> removing/replacing the 2nd screw in a single L/R channel blows the bleed
> for the 1st in the same channel. Hopefully this makes sense. Thanks!
>
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Kaptain Kosmo
Hyundai Mailing List
1
Aug 26, 2005 12:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
