valve noise or pinging noise?
Guest
Posts: n/a
Re: valve noise or pinging noise?
I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
87 ISNT?
"Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote in message
news:10nb4cvoe7l76e2@corp.supernews.com...
> 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> done this in an 88 prelude Si, you'd be the luckiest man on earth.
>
> > 5) im the luckiest man on earth hahahhaha
> >
> >
>
>
87 ISNT?
"Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote in message
news:10nb4cvoe7l76e2@corp.supernews.com...
> 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> done this in an 88 prelude Si, you'd be the luckiest man on earth.
>
> > 5) im the luckiest man on earth hahahhaha
> >
> >
>
>
Guest
Posts: n/a
Re: valve noise or pinging noise?
I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
87 ISNT?
"Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote in message
news:10nb4cvoe7l76e2@corp.supernews.com...
> 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> done this in an 88 prelude Si, you'd be the luckiest man on earth.
>
> > 5) im the luckiest man on earth hahahhaha
> >
> >
>
>
87 ISNT?
"Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote in message
news:10nb4cvoe7l76e2@corp.supernews.com...
> 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> done this in an 88 prelude Si, you'd be the luckiest man on earth.
>
> > 5) im the luckiest man on earth hahahhaha
> >
> >
>
>
Guest
Posts: n/a
Re: valve noise or pinging noise?
Gates.com says most Honda models from the 1970s to 2001 have interference
engines, but not all. (It doesn't have info on 2002 to the present engines.)
NOT interference, according to Gates:
Civic 2001
Passport 1994-2001
http://www.gates.com/brochure.cfm?br...preset663Gates
(open the pdf file listed near the bottom)
So I don't know if the statement below about the 1988 Prelude is correct. Gates
mentions Si versions of the Civic but not the Prelude, so maybe Gates is
incomplete.
But nor can I tell if there are some interference engines whose valve design and
timing are such that, even though it's interference, the damage is less likely.
"lamont1" <lamont@lamont.com> wrote
> I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
> 87 ISNT?
> "Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote
> > 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> > done this in an 88 prelude Si, you'd be the luckiest man on earth.
> >
> > > 5) im the luckiest man on earth hahahhaha
engines, but not all. (It doesn't have info on 2002 to the present engines.)
NOT interference, according to Gates:
Civic 2001
Passport 1994-2001
http://www.gates.com/brochure.cfm?br...preset663Gates
(open the pdf file listed near the bottom)
So I don't know if the statement below about the 1988 Prelude is correct. Gates
mentions Si versions of the Civic but not the Prelude, so maybe Gates is
incomplete.
But nor can I tell if there are some interference engines whose valve design and
timing are such that, even though it's interference, the damage is less likely.
"lamont1" <lamont@lamont.com> wrote
> I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
> 87 ISNT?
> "Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote
> > 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> > done this in an 88 prelude Si, you'd be the luckiest man on earth.
> >
> > > 5) im the luckiest man on earth hahahhaha
Guest
Posts: n/a
Re: valve noise or pinging noise?
Gates.com says most Honda models from the 1970s to 2001 have interference
engines, but not all. (It doesn't have info on 2002 to the present engines.)
NOT interference, according to Gates:
Civic 2001
Passport 1994-2001
http://www.gates.com/brochure.cfm?br...preset663Gates
(open the pdf file listed near the bottom)
So I don't know if the statement below about the 1988 Prelude is correct. Gates
mentions Si versions of the Civic but not the Prelude, so maybe Gates is
incomplete.
But nor can I tell if there are some interference engines whose valve design and
timing are such that, even though it's interference, the damage is less likely.
"lamont1" <lamont@lamont.com> wrote
> I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
> 87 ISNT?
> "Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote
> > 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> > done this in an 88 prelude Si, you'd be the luckiest man on earth.
> >
> > > 5) im the luckiest man on earth hahahhaha
engines, but not all. (It doesn't have info on 2002 to the present engines.)
NOT interference, according to Gates:
Civic 2001
Passport 1994-2001
http://www.gates.com/brochure.cfm?br...preset663Gates
(open the pdf file listed near the bottom)
So I don't know if the statement below about the 1988 Prelude is correct. Gates
mentions Si versions of the Civic but not the Prelude, so maybe Gates is
incomplete.
But nor can I tell if there are some interference engines whose valve design and
timing are such that, even though it's interference, the damage is less likely.
"lamont1" <lamont@lamont.com> wrote
> I HEARD THAT ALL HONDAS ARE INTERFERENCE ENGINES. HOW DO YOU KNOW THAT THE
> 87 ISNT?
> "Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote
> > 86-89 accord usually DON'T bend valves when the belt breaks. If you had
> > done this in an 88 prelude Si, you'd be the luckiest man on earth.
> >
> > > 5) im the luckiest man on earth hahahhaha
Guest
Posts: n/a
Re: valve noise or pinging noise?
Caroline wrote:
>
> But nor can I tell if there are some interference engines whose valve
> design and timing are such that, even though it's interference, the
> damage is less likely.
It would depend on where the cam stopped rotating. If it stopped in a
position such that the valves were only half-way open then one might escape
valve damage.
Eric
>
> But nor can I tell if there are some interference engines whose valve
> design and timing are such that, even though it's interference, the
> damage is less likely.
It would depend on where the cam stopped rotating. If it stopped in a
position such that the valves were only half-way open then one might escape
valve damage.
Eric
Guest
Posts: n/a
Re: valve noise or pinging noise?
Caroline wrote:
>
> But nor can I tell if there are some interference engines whose valve
> design and timing are such that, even though it's interference, the
> damage is less likely.
It would depend on where the cam stopped rotating. If it stopped in a
position such that the valves were only half-way open then one might escape
valve damage.
Eric
>
> But nor can I tell if there are some interference engines whose valve
> design and timing are such that, even though it's interference, the
> damage is less likely.
It would depend on where the cam stopped rotating. If it stopped in a
position such that the valves were only half-way open then one might escape
valve damage.
Eric
Guest
Posts: n/a
Re: valve noise or pinging noise?
"Eric" <say.no@spam.now> wrote
> Caroline wrote:
> >
> > But nor can I tell if there are some interference engines whose valve
> > design and timing are such that, even though it's interference, the
> > damage is less likely.
>
> It would depend on where the cam stopped rotating. If it stopped in a
> position such that the valves were only half-way open then one might escape
> valve damage.
This is true of any interference engine, no?
Damage is never guaranteed when a TB on an interference engine breaks; it
depends on where the timing is when the belt breaks, engine RPM at the time of
breakage, etc.
I'm wondering whether there are certain designs of interference engines that, I
dunno, have a different valve angle or some other design feature that reduce the
likelihood of damage when the TB breaks.
> Caroline wrote:
> >
> > But nor can I tell if there are some interference engines whose valve
> > design and timing are such that, even though it's interference, the
> > damage is less likely.
>
> It would depend on where the cam stopped rotating. If it stopped in a
> position such that the valves were only half-way open then one might escape
> valve damage.
This is true of any interference engine, no?
Damage is never guaranteed when a TB on an interference engine breaks; it
depends on where the timing is when the belt breaks, engine RPM at the time of
breakage, etc.
I'm wondering whether there are certain designs of interference engines that, I
dunno, have a different valve angle or some other design feature that reduce the
likelihood of damage when the TB breaks.
Guest
Posts: n/a
Re: valve noise or pinging noise?
"Eric" <say.no@spam.now> wrote
> Caroline wrote:
> >
> > But nor can I tell if there are some interference engines whose valve
> > design and timing are such that, even though it's interference, the
> > damage is less likely.
>
> It would depend on where the cam stopped rotating. If it stopped in a
> position such that the valves were only half-way open then one might escape
> valve damage.
This is true of any interference engine, no?
Damage is never guaranteed when a TB on an interference engine breaks; it
depends on where the timing is when the belt breaks, engine RPM at the time of
breakage, etc.
I'm wondering whether there are certain designs of interference engines that, I
dunno, have a different valve angle or some other design feature that reduce the
likelihood of damage when the TB breaks.
> Caroline wrote:
> >
> > But nor can I tell if there are some interference engines whose valve
> > design and timing are such that, even though it's interference, the
> > damage is less likely.
>
> It would depend on where the cam stopped rotating. If it stopped in a
> position such that the valves were only half-way open then one might escape
> valve damage.
This is true of any interference engine, no?
Damage is never guaranteed when a TB on an interference engine breaks; it
depends on where the timing is when the belt breaks, engine RPM at the time of
breakage, etc.
I'm wondering whether there are certain designs of interference engines that, I
dunno, have a different valve angle or some other design feature that reduce the
likelihood of damage when the TB breaks.
Guest
Posts: n/a
Re: valve noise or pinging noise?
"Caroline" <caroline10027remove@earthlink.net> wrote in message
news:sived.6431$ta5.5054@newsread3.news.atl.earthl ink.net...
> Gates.com says most Honda models from the 1970s to 2001 have interference
> engines, but not all. (It doesn't have info on 2002 to the present
> engines.)
>
> NOT interference, according to Gates:
> Civic 2001
> Passport 1994-2001
>
> http://www.gates.com/brochure.cfm?br...preset663Gates
> (open the pdf file listed near the bottom)
>
Gates can be wrong. It lists my 85 Volvo 765T (2.3L B230FT) as interference,
when it definitely isn't (even if fitted with an aftermarket cam).
Mike
news:sived.6431$ta5.5054@newsread3.news.atl.earthl ink.net...
> Gates.com says most Honda models from the 1970s to 2001 have interference
> engines, but not all. (It doesn't have info on 2002 to the present
> engines.)
>
> NOT interference, according to Gates:
> Civic 2001
> Passport 1994-2001
>
> http://www.gates.com/brochure.cfm?br...preset663Gates
> (open the pdf file listed near the bottom)
>
Gates can be wrong. It lists my 85 Volvo 765T (2.3L B230FT) as interference,
when it definitely isn't (even if fitted with an aftermarket cam).
Mike
Guest
Posts: n/a
Re: valve noise or pinging noise?
"Caroline" <caroline10027remove@earthlink.net> wrote in message
news:sived.6431$ta5.5054@newsread3.news.atl.earthl ink.net...
> Gates.com says most Honda models from the 1970s to 2001 have interference
> engines, but not all. (It doesn't have info on 2002 to the present
> engines.)
>
> NOT interference, according to Gates:
> Civic 2001
> Passport 1994-2001
>
> http://www.gates.com/brochure.cfm?br...preset663Gates
> (open the pdf file listed near the bottom)
>
Gates can be wrong. It lists my 85 Volvo 765T (2.3L B230FT) as interference,
when it definitely isn't (even if fitted with an aftermarket cam).
Mike
news:sived.6431$ta5.5054@newsread3.news.atl.earthl ink.net...
> Gates.com says most Honda models from the 1970s to 2001 have interference
> engines, but not all. (It doesn't have info on 2002 to the present
> engines.)
>
> NOT interference, according to Gates:
> Civic 2001
> Passport 1994-2001
>
> http://www.gates.com/brochure.cfm?br...preset663Gates
> (open the pdf file listed near the bottom)
>
Gates can be wrong. It lists my 85 Volvo 765T (2.3L B230FT) as interference,
when it definitely isn't (even if fitted with an aftermarket cam).
Mike
Thread
Thread Starter
Forum
Replies
Last Post
doozcoopey
Honda Mailing List
48
May 3, 2006 12:39 AM
doozcoopey
Honda Mailing List
0
May 2, 2006 01:52 PM
projektor@gmail.com
Hyundai Mailing List
2
Sep 6, 2005 04:32 PM
Al Franz
Honda Mailing List
26
Aug 5, 2005 12:46 AM
Jonathan
Honda Mailing List
15
Sep 16, 2003 08:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)