what is that tube, anyway
#16
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:25 pm, Steve <n...@spam.thanks> wrote:
> > So, the question is, why, instead of just running a foot of hose to
> > carry the coolant to the throttle body, do they use a foot of hose to
> > run it through a steel tube siamesed to the steel tube that carries
> > the input air for the PCV and then out another foot of hose? Are they
> > trying to heat the air for the PCV up before it gets into the engine?
> > Are they trying to cool the coolant before it gets to the throttle
> > body? The mechanical stability for the thing is entirely from the PCV
> > inlet connection at each end.
>
> > What gives??
>
> That's the state of PCV systems today. In order to lower emissions they
> run them so near the ragged edge of too little flow to keep the engine
> clean that they have to HEAT the PCV air to keep the gookum from
> condensing out and clogging it. This is why so many engines die of
> "sludge" in the oil these days- the PCV systems are no longer flowing
> enough air to keep the internals of the engine as clean as they once did.
Mm. Never thought of that; heating to prevent the gook and/or ice from
clogging. Thanks, guys.
> > So, the question is, why, instead of just running a foot of hose to
> > carry the coolant to the throttle body, do they use a foot of hose to
> > run it through a steel tube siamesed to the steel tube that carries
> > the input air for the PCV and then out another foot of hose? Are they
> > trying to heat the air for the PCV up before it gets into the engine?
> > Are they trying to cool the coolant before it gets to the throttle
> > body? The mechanical stability for the thing is entirely from the PCV
> > inlet connection at each end.
>
> > What gives??
>
> That's the state of PCV systems today. In order to lower emissions they
> run them so near the ragged edge of too little flow to keep the engine
> clean that they have to HEAT the PCV air to keep the gookum from
> condensing out and clogging it. This is why so many engines die of
> "sludge" in the oil these days- the PCV systems are no longer flowing
> enough air to keep the internals of the engine as clean as they once did.
Mm. Never thought of that; heating to prevent the gook and/or ice from
clogging. Thanks, guys.
#17
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:25 pm, Steve <n...@spam.thanks> wrote:
> > So, the question is, why, instead of just running a foot of hose to
> > carry the coolant to the throttle body, do they use a foot of hose to
> > run it through a steel tube siamesed to the steel tube that carries
> > the input air for the PCV and then out another foot of hose? Are they
> > trying to heat the air for the PCV up before it gets into the engine?
> > Are they trying to cool the coolant before it gets to the throttle
> > body? The mechanical stability for the thing is entirely from the PCV
> > inlet connection at each end.
>
> > What gives??
>
> That's the state of PCV systems today. In order to lower emissions they
> run them so near the ragged edge of too little flow to keep the engine
> clean that they have to HEAT the PCV air to keep the gookum from
> condensing out and clogging it. This is why so many engines die of
> "sludge" in the oil these days- the PCV systems are no longer flowing
> enough air to keep the internals of the engine as clean as they once did.
Mm. Never thought of that; heating to prevent the gook and/or ice from
clogging. Thanks, guys.
> > So, the question is, why, instead of just running a foot of hose to
> > carry the coolant to the throttle body, do they use a foot of hose to
> > run it through a steel tube siamesed to the steel tube that carries
> > the input air for the PCV and then out another foot of hose? Are they
> > trying to heat the air for the PCV up before it gets into the engine?
> > Are they trying to cool the coolant before it gets to the throttle
> > body? The mechanical stability for the thing is entirely from the PCV
> > inlet connection at each end.
>
> > What gives??
>
> That's the state of PCV systems today. In order to lower emissions they
> run them so near the ragged edge of too little flow to keep the engine
> clean that they have to HEAT the PCV air to keep the gookum from
> condensing out and clogging it. This is why so many engines die of
> "sludge" in the oil these days- the PCV systems are no longer flowing
> enough air to keep the internals of the engine as clean as they once did.
Mm. Never thought of that; heating to prevent the gook and/or ice from
clogging. Thanks, guys.
#18
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
#19
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
#20
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
#21
Guest
Posts: n/a
Re: what is that tube, anyway
On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
> If it's "puking up oil" then you've got a blowby or a sludge problem.
> That's NOT normal.
Well, not a visible lot, but over the years I notice that some oil is
now resident in the air filter pipe when I take out this PCV inlet;
and since the last time I had to replace the gunked up idle air
adjustment hole, which ended up with the mechanic installing a
defective distributor for which I ate the cost, a story posted
elsewhere, I decided to avoid it.
> Although if that were the aim, don't you think they'd bond the two lines
> together directly instead of insulating them from each other with that
> black rubber thingy?
What black rubber thingy? On my engine, the two are bonded metal to
metal. Does the teg have a rubber spacer between them?
#22
Guest
Posts: n/a
Re: what is that tube, anyway
"z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#23
Guest
Posts: n/a
Re: what is that tube, anyway
"z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#24
Guest
Posts: n/a
Re: what is that tube, anyway
"z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#25
Guest
Posts: n/a
Re: what is that tube, anyway
"z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
@a75g2000cwd.googlegroups.com:
> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>
>> If it's "puking up oil" then you've got a blowby or a sludge problem.
>> That's NOT normal.
>
> Well, not a visible lot, but over the years I notice that some oil is
> now resident in the air filter pipe when I take out this PCV inlet;
> and since the last time I had to replace the gunked up idle air
> adjustment hole, which ended up with the mechanic installing a
> defective distributor for which I ate the cost, a story posted
> elsewhere, I decided to avoid it.
It's normal to have a light film of oil in the vicinity of the breather
inlet from the air cleaner pipe. By "light" I mean a film you can see as
wetness on the plastic, but that doesn't have any thickness.
If that film has turned into gunk and is fouling the throttle plate, then
there is an engine problem.
>
>
>> Although if that were the aim, don't you think they'd bond the two lines
>> together directly instead of insulating them from each other with that
>> black rubber thingy?
>
> What black rubber thingy? On my engine, the two are bonded metal to
> metal. Does the teg have a rubber spacer between them?
>
>
In mine (2nd gen), yes. Other than your guess, I can't see why they'd have
the two pipes together. Maybe Comboverfish has a better idea.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#26
Guest
Posts: n/a
Re: what is that tube, anyway
Tegger <tegger@tegger.c0m> wrote in
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#27
Guest
Posts: n/a
Re: what is that tube, anyway
Tegger <tegger@tegger.c0m> wrote in
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#28
Guest
Posts: n/a
Re: what is that tube, anyway
Tegger <tegger@tegger.c0m> wrote in
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
#29
Guest
Posts: n/a
Re: what is that tube, anyway
Tegger <tegger@tegger.c0m> wrote in
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
news:Xns98D7A97E6B6FEtegger@207.14.116.130:
> "z" <gzuckier@snail-mail.net> wrote in news:1171469121.219308.313920
> @a75g2000cwd.googlegroups.com:
>
>> On Feb 13, 5:42 pm, Tegger <teg...@tegger.c0m> wrote:
>>
>>
>>
>>> Although if that were the aim, don't you think they'd bond the two
>>> lines together directly instead of insulating them from each other
>>> with that black rubber thingy?
>>
>> What black rubber thingy? On my engine, the two are bonded metal to
>> metal. Does the teg have a rubber spacer between them?
>>
>>
>
> In mine (2nd gen), yes. Other than your guess, I can't see why they'd
> have the two pipes together. Maybe Comboverfish has a better idea.
>
>
I should have actually looked before going by my flawed memory.
Those pipes ARE in contact on my car, just like yours. The black thing just
seems to cover the seams or something.
In fact, I have THREE lines bundled together there. The third one is the
vacuum line for the Air Boost Valve.
--
Tegger
The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Thread
Thread Starter
Forum
Replies
Last Post
TH
Hyundai Mailing List
10
11-30-2006 11:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)