where can i find existing hole in firewall to get to inside car
#2
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
just where it meets the firewall. There may be some holes with rubber
plugs, but danged if I could find any free for usage.
MK
#3
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
just where it meets the firewall. There may be some holes with rubber
plugs, but danged if I could find any free for usage.
MK
#4
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
just where it meets the firewall. There may be some holes with rubber
plugs, but danged if I could find any free for usage.
MK
#5
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
just where it meets the firewall. There may be some holes with rubber
plugs, but danged if I could find any free for usage.
MK
#6
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
On 4 Nov 2006 18:58:03 -0800, jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
#7
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
On 4 Nov 2006 18:58:03 -0800, jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
#8
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
On 4 Nov 2006 18:58:03 -0800, jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
#9
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
On 4 Nov 2006 18:58:03 -0800, jameskcheng@gmail.com wrote:
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
> hello. i have 1994 civic. where can i find an existing hole in the
> engine firewall to get wires inside to my car? does somebody have
> pictures they can show me? thanks!
Open up one of your front doors all the way and examine any holes or cracks
that could pass a wire through to the engine compartment. That's how I got
a subwoofer power wire to the battery.
--
It's amazing what a man can accomplish when he's not worried about who will
get the credit.
RocinanteREMOVETHIS@gmail.com
11/5/2006 6:17:30 AM
#10
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
nm5k@wt.net wrote:
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
#11
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
nm5k@wt.net wrote:
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
#12
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
nm5k@wt.net wrote:
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
#13
Guest
Posts: n/a
Re: where can i find existing hole in firewall to get to inside car
nm5k@wt.net wrote:
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
>
> jameskcheng@gmail.com wrote:
> > hello. i have 1994 civic. where can i find an existing hole in the
> > engine firewall to get wires inside to my car? does somebody have
> > pictures they can show me? thanks!
>
> Rotsa Ruck..I had to drill holes for mine. Drilled them on the floor
> just where it meets the firewall. There may be some holes with rubber
> plugs, but danged if I could find any free for usage.
> MK
Sometimes you can use the holes which are already in use by other wire
bundles. Remove the electrical tape on the engine side of the wire bundle
on the firewall right where it goes through the firewall where it connects
to the grommet. Give your new wires a light coat of silicone grease at the
end to help get them started through the grommet of the wire bundle. Note
that you'll be forcing this wire along the side of the existing wire bundle
and not through the middle of it. Once you get the wire through, you can
carefully pull it out to the length needed. Clean off any silicone grease
which remains near the firewall grommet with some contact cleaner, let it
dry, and then rewrap it with some fresh electrical tape to help seal out
water from getting through the grommet.
Eric
Thread
Thread Starter
Forum
Replies
Last Post
imported_sam s
Honda Accord
4
11-25-2007 05:53 PM
jameskcheng@gmail.com
Honda Mailing List
0
11-04-2006 09:58 PM
jameskcheng@gmail.com
Honda Mailing List
0
11-04-2006 09:58 PM
jameskcheng@gmail.com
Honda Mailing List
0
11-04-2006 09:58 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)