imported_ANDY

main relay- changed.., how do you check reset the ecu, beside removing the battery (-) off.... I HAD THE ENGINE REMOVE SO I CAN EASY ACCESS THE PUSH ROD BEARING, every thing when good and timing is on the TDC point... prefect.. that engine was running strong.. now it only rotate.... it wont fire up... im thinking no power to the spark , and no power to the injector... i didnt check it yet... help. at any short cut,,, the 8.5 mechanic. out 10... rate.. that me baby..blinking 5 times.. what does it mean.

9crx0

im a honda person my self that was good enough taking the battery cable off since your car is obdo turn your car on to where your dash light come on and see if your flashing any codes on your ecu by removing the carpet on the passenger side under the glove box or its under your pass side seats but more then likely its a bad ground check to make sure your grounds in the engine bay are connected the ground that connects to your fuel pump and other such things should be on your thermostat housing you might even want to open your gas lid and have some one turn the ignition on while you hold your ear up to the hole and see if you hear the whirling sound of your gas pump coming on it wont last long so you might have to do it a couple times and another thing it would not hurt to go get another ground wire an hook it up to your motor sorry all this is ran together im tired as hell and going to sleep good luck